hama 300082 USB OTG Hub-Card Reader Instruction Manual

: June 5, 2024
: Hama

Table of Contents

Package Contents
Safety Notes
Startup and Operation
Warranty Disclaimer
**** Technical Data
Documents / Resources

300082 USB OTG Hub-Card Reader
Instruction Manual hama 300082 USB OTG Hub-Card
Reader

**Operating instruction**

Package Contents

USB OTGHub/CardReader
USB adapter
These operating instructions

Safety Notes

Donot attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Donot open the device or continue to operate it if it becomes damaged.
Donot operate the product outside the power limits given in the specifications.
Donot modify the product in any way. Doing so voids the warranty.
Keep this product, like all electrical products, out of the reach of children!
Use the product for its intended purpose only.
Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.
The product is intended for indoor use only.
Donot use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
Donot use the product in moist environments and avoid splashes.
Donot use the product in areas where the use of electronic devices is not permitted.
Donot drop the product and do not expose it to any major shocks.
Dispose of packaging material immediately according to locally applicable regulations.
Warning –Data Loss
Ensure that data transfer is complete before you remove the storage medium from the device.
If you do not do this, data may be lost.
Warning
Find out the maximum output current capacity of the USB port on your device. To do this, consult the operating instructions or ask the manufacturer.
Common values are500 mA for USB-A2.0, 900 mA for USB-A3.0, and up to 3000 mA for USB-C.
Ensure that the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value.

Startup and Operation

Switch on your computer and boot the system.
Connect the product to a free USB port on your computer.
You donot have to install drivers; the computer will automatically recognize the product.
If necessary, follow the instructions for your operating system.
In order to use your devices, plug them into the product one after the other.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

**** Technical Data

Operating voltage/current consumption	5V max. 500 mA
Compatibility	USB-Aport

USB-micro port
System requirements| Windows 11 /10/8/7
Mac OS 10.8 ≥
OTG: Android 4.0 ≥
The smartphone/ tablet must support the OTG technology
USB specification| USB 2.0

Note

If there is interference or the product no longer responds, unplug the product, wait a few seconds, and then plug it in again.

**Service Et Support**
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.
00300082/09.21