SUPERATV HDR-1-33 Heavy-Duty Radiator for Polaris Instruction Manual
- June 3, 2024
- SUPERATV
Table of Contents
HDR-1-33 Heavy-Duty Radiator for Polaris
Instruction Manual 
2753 Michigan Road · Madison
Indiana 47250 · 855-743-3427
HDR-1-33 Heavy-Duty Radiator for Polaris
INSTALLATION INSTRUCTIONS
Heavy Duty Radiator: for multiple Polaris RZR® models
– Avoid burns and scalding by working on cool vehicles.
– Use manufacturers recommended coolant.
– Verify that no leaks are present after installation.
CUSTOMER NOTIFICATION AND DISCLAIMER LIABILITY
This product is a modification for utility task vehicles and all-terrain
vehicles. Use this product at your own risk.
Warranty and Liability Limitations. The Buyer hereby assumes all risks
associated with the use and/or installation of this product. Buyer waives all
liability claims against SuperATV® of any kind or nature, including, but not
limited to, liability for penalties, fines, property damage, personal injury,
or death, to the fullest extent permitted by law. Buyer acknowledges and
agrees that SuperATV® is not liable for any direct, indirect, incidental,
consequential or special damages, including but not limited to, damage, loss
of life, loss of property or equipment, loss of profits or revenue, injury, or
claims from any individual or entity arising from the use of this product.
The warranty for this product, if any, may give you (“Buyer”) specific legal
rights, and the Buyer may also have other rights which may vary from state to
state. The installation of this product may void or otherwise adversely affect
your factory warranty.
Consult your vehicle warranty before using this Product. Under no
circumstances will SuperATV® be liable for the voidance of the Buyer’s vehicle
warranty. Buyer assumes all risk and responsibility if a manufacturer and/or
dealer voids the Buyer’s vehicle warranty due to the use of this Product.
Safety and Laws. Operate your vehicle at all times in a safe manner. You must
abide by all local, state, and federal laws, including but not limited to
vehicle safety, traffic laws, and ordinances. It is your responsibility to
know the laws and how they apply to you. The installation of this product may
violate certain local, state, and federal laws. Be advised that laws vary
depending on the town, city, county, state, etc. Use of this product on public
streets, roads, or highways may be in violation of law. The Buyer is solely
and exclusively legally and personally responsible for any violation of the
law by the installation or use of this product. In no case will SuperATV® be
held liable if the Buyer violates the law or uses the product in an unsafe
manner.
The Buyer is responsible for fully understand the capability and limitations
of his/her vehicle according to manufacturer specifications, warnings and
instructions and agrees to hold SuperATV® harmless from any damage resulting
from failure to adhere to such specifications, warnings, and/ or instructions.
The Buyer is also responsible to obey all applicable federal, state, and local
laws when operating his/her vehicle while using this product, and the Buyer
agrees to hold SuperATV® harmless from any violation thereof.
Installation. The installation of this product on your vehicle indicates that
you have had the opportunity to inquire about applicable local, state, and
federal laws and ordinances and that you have read and understand, and accept
all of the terms of, this Disclaimer.
SuperATV® shall not be responsible for the proper installation, use, and
service of this product. Rather, the Buyer shall be solely responsible for the
installation of the product and any damage that may be done to the vehicle or
vehicle components as a result of modifications made by the Buyer.
– Transfer stock Fan to new Radiator. Secure with stock hardware.
– If not installed, install Nipple.
– Reverse steps taken during removal and install new Radiator. TRAIL S 1000
models see pages 8 – 9 for installation of Radiator.
– Ensure that there is no interference before connecting the Hoses and Tube.
– Interference between Radiator Shroud and HDR-1-33 Radiator may occur on some
machines. See pages 5 – 6 for modifications.
– 2018 and up XP1000 machines see page 7 for lower plastic modification.
– Before removing Hose Clamps, fill the Radiator completely with anti-freeze.
– Bleed Radiator if necessary and check the fluid level after running the
machine for 30 minutes.
Radiator Shroud Modifications
Repeat for opposite side of Radiator Shroud.
XP1000 Lower Plastic Modification
RZR® Trail S 1000 installation
Read instructions and view
illustrations before beginning.
Thank You
For Choosing
Need help with your installation?
sales@superatv.com
www.superatv.com
8:00am – 8:00pm EST M-Th
8:00am – 7:00pm EST Friday
1-855-743-3427
9:00am – 2:00pm EST Saturday