tp-link For Deco Router AC1200 Whole Home Mesh Wi-Fi System Installation Guide

June 5, 2024
tp-link

Quick Installation Guide
For Deco Router

Getting Started

Download the TP-Link Deco app for iOS or Android. The app will walk you through the setup

tp .link For Deco Router AC1200 Whole Home -

LED Status
Each Deco has an LED light that changes color according to its status. See the explanation below.

LED DECO STATUS
Yellow pulse Deco is resetting.
Yellow solid Deco is starting up.
Blue pulse Deco is ready for setup.
Blue solid Deco is setting up.
Green pulse/White pulse Deco is upgrading firmware.
Green solid/White solid Deco is registered and all is well.
Red pulse Deco is disconnected from main Deco.
Red solid Deco has an issue.

Need Help?
For answers to frequently asked questions (FAQs) and technical support, please go to

  • https://www.tp-link.com
    Navigate to Deco’s support page

  • the Deco app Swipe right at the main page and select Help? from the menu.

Safety Information

  • The adapter shall be installed near the equipment and shall be easily accessible.
  • Keep the device away from water, fire, humidity, or hot environments.
  • Do not attempt to disassemble, repair, or modify the device.
  • Do not use a damaged charger or USB cable to charge the device.
  • Do not use any other chargers than those recommended.
  • Do not use the device where wireless devices are not allowed.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp- link.com/support/ce/.

For TP-Link Branded Products Only. For more information about the warranty, please visit http://www.tp-link.com/en/support
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.
TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in accordance with TP-Link’s guidelines for some period which depends on the local service from the date of original retail purchase by the end-user purchaser.

Operating Frequency/max output power| 2400MHZ~ 2483.5MHz/20dBm 5150MHz~ 5250MHz/23dBm
---|---
****| AT| BE| BG| CH| CY| CZ| DE| DK
---|---|---|---|---|---|---|---|---
EE| EL| ES| Fl| FR| HR| HU| IE
IS| IT| LI| LT| LU| LV| MT| NL
NO| PL| PT| RO| SE| SI| SK| UK

Attention: This device may only be used indoors in all EU member states and EFTA countries.

GNU General Public License Notice
This product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”). As applicable, TP-Link (“TP-Link” in this context referring to the TP-Link entity offering respective software for download or being responsible for the distribution of products that contain respective code)  provides, by itself or with the support of third parties (e.g. the TP-Link International Limited seated in Hong Kong), mail service of a machine-readable copy of the corresponding GPL source code on CD-ROM upon request via email or traditional paper mail. TPLink will charge a nominal cost to cover shipping and media charges as allowed under the GPL. This offer will be valid for at least 3 years.
For GPL inquiries and the GPL CD-ROM information, please contact GPL@tp- link.com or write to Suite 901, New East Ocean Centre, Tsim Sha Tsui, Hong Kong.
Additionally, TP-Link provides a GPL-Code-Centre under http://www.tp- link.com/en/support/gpl/ where machine-readable copies of the GPL source codes used
in TP-Link products are available for free download. Please note, that the GPL-Code-Centre is only provided as a courtesy to TP-Link’s customers but may neither
offer a full set of source codes used in all products nor always provide the latest or actual version of such source codes.
The GPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For further information about the GNU General Public License please refer to the following website: http://static.tp-link.com/resources/document/GPL%20License%20Terms.pdf

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

tp-link User Manuals

Related Manuals