TLS electronics 30041 USB 2.0 Switch User Manual
- June 5, 2024
- TLS electronics
Table of Contents
30041 USB 2.0 Switch 4×1
30041 User Manual
USB 2.0 Switch 4×1
TLS electronics GmbH
Contact:info@tls-electronics.de
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lightning strikes, etc. Use of
surge protection systems is highly recommended in order to protect and extend
the life of your equipment.
Introduction
This is a stylish touch control USB sharing switch. USB sharing switch allows multiple computers to share a single USB interface equipment, such as lan card, camera, mobile hard disk, printer, scanner, plotter, multi-function equipment, etc. A variety of USB peripherals can be achieved through this product. Multiple computer share a device. The purpose is not only to decrease the cost of purchase, also to save more space resources.
Features
- Multiple computer interfaces
- Computer interface type – USB B female
- USB interface type – USB a female
- Compatible with USB 1.1
- Switch way – touch switch
- USB power supply – without external power supply
- USB interface compatible with 1.1, 2.0 can be used for the HUB, camera, mobile hard disk, lan card, etc, It can support 127 kinds of USB devices.
- Maximum transfer rate of up to 480 Mbps
- Support LED indicator, indicating the currently selected PC
- Durable metal shell
Connection Descriptions
-
Take the USB switch from the box. Then connect the computer to USB B female port PC1-4 on the back panel. Now connect the sharing device to USB A female port on the side panel. There is no power supply needed.
-
Now switch with the touch switch panel from Computer (PC1) to Computer (PC4).
Package Contents
- 1x 30041 USB2.0 Switch 4×1
- Manual
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.
Warranty Policy
TLS electronics products are warranted against defects in material and
workmanship for three years from the date of shipment. During the warranty
period, TLS electronics will, at its option, repair or replace products that
prove to be defective. Repairs are warranted for the remainder of the original
warranty or a 90 day extended warranty, whichever is longer. For equipment
under warranty, the owner is responsible for freight to TLS electronics and
all related customs, taxes, tariffs, insurance, etc. TLS electronics is
responsible for the freight charges only for return of the equipment from the
factory to the owner. TLS electronics will return the equipment by the same
method as the equipment was sent to TLS electronics. All equipment returned
for warranty repair must have a valid RMA number issued prior to return and be
marked clearly on the return packaging. TLS
electronics strongly recommends all equipment be returned in its original
packaging.
TLS electronics obligations under this warranty are limited to repair or
replacement of failed parts, and the return shipment to the buyer of the
repaired or replaced parts.
Limitations of Warranty
The warranty does not apply to any part of a product that has been installed,
altered, repaired, or misused in any way that, in the opinion of TLS
electronics, would affect the reliability or detracts from the performance of
any part of the product, or is damaged as the result of use in a way or with
equipment that had not been previously approved by TLS electronics.
The warranty does not apply to any product or parts thereof where the serial
number or the serial number of any of its parts has been altered, defaced, or
removed. The warranty does not cover damage or loss incurred in the
transportation of the product.
The warranty does not cover replacement or repair necessitated by loss or
damage from any cause beyond the control of TLS electronics, such as lightning
or other natural and weather-related events or wartime environments. The
warranty does not cover any labor involved in the removal and or
reinstallation of warranted equipment or parts on site, or any labor required
to diagnose the necessity for repair or replacement.
The warranty excludes any responsibility by TLS electronics for incidental or
consequential damages arising from the use of the equipment or products, or
for any inability to use them either separate from or in combination with any
other equipment or products.
A fixed charge established for each product will be imposed for all equipment
returned for warranty repair where TLS electronics cannot identify the cause
of the reported failure.
Exclusive Remedies
TLS electronics’s warranty, as stated is in lieu of all other warranties,
expressed, implied, or statutory, including those of merchantability and
fitness for a particular purpose. The buyer shall pass on to any purchaser,
lessee, or other user of TLS electronics products, the aforementioned
warranty, and shall indemnify and hold harmless TLS electronics from any
claims or liability of such purchaser, lessee, or user based upon allegations
that the buyer, its agents, or employees have made additional warranties or
representations as to product preference or use.
The remedies provided herein are the buyer’s sole and exclusive remedies. TLS
electronics shall not be liable for any direct, indirect, special, incidental,
or consequential damages, whether based on contract, tort, or any other legal
theory.
RMA Policy
When returning product to TLS electronics for any reason, the customer should fill out the official RMA form to obtain a RMA number. Without the permission or approval, TLS electronics will be no responsible for any return. This can be initiated by emailing or calling your related sales. All requests are processed within 48 hours.
Standard Replacement
For customers that agree to return defective product to TLS electronics
first, a Standard Replacement option is available.
An RMA number must first be issued by sales. This RMA number will need to be
referenced on the outside of the return shipment.
Upon receipt of the defective product, TLS electronics will, at its
discretion, either repair or replace the product and ship it out in the most
expeditious manner possible. Subject to availability, the replacement product
will be shipped on the business day following receipt of the defective
product. In the event the product returned to TLS electronics has been
discontinued (i.e. the product is no longer being manufactured by TLS
electronics but is still under warranty), TLS electronics will, at its
discretion, either repair or replace with recertified product.
Once you have obtained an RMA number
After obtaining an RMA number from TLS electronics, you must send the product
– freight prepaid – to TLS electronics. The TLS electronics RMA number must be
prominently displayed on the outside of your package. If you send your product
to TLS electronics without the RMA number prominently displayed on the outside
of the package, it will be returned to you unopened.
Please use a shipping company that can demonstrate proof of delivery. TLS
electronics does not accept responsibility for any lost shipments unless proof
of delivery to TLS electronics is provided.
Please note:
Products shipped to TLS electronics must be properly packaged to prevent
loss or damage in transit.
Shipping your RMA to TLS electronics using regular mailing envelopes is not
acceptable, as they do not protect the product from damage during shipping.
TLS electronics will not repair or replace a module that is shipped in such a
way that the product is not properly protected.
TLS electronics will not accept any product that has been damaged as a result
of an accident, abuse, misuse, natural or personal disaster, or any
unauthorized disassemble repair or modification.
TLS electronics GmbH
Marie-Curie-Straße 20
D-40721 Hilden
Tel.: +49 (0) 211 522875 0
Fax: +49 (0) 2103 5006-90
E-Mail:info@tls-electronics.de
www.tls-electronics.de
TLS electronics GmbH
Contact:info@tls-electronics.de