MSI Summit E13FlipEvo A11MT-021 User Guide

June 5, 2024
MSI

MSI Summit E13FlipEvo A11MT-021

MSI Summit-E13FlipEvo-
A11MT-021-PRODUCT

Product Overview (for reference only)

  1. Webcam/ Webcam LED/ Internal Microphone
  2. Touch Screen Monitor
  3. Power Key/ Power LED
  4. Fingerprint Sensor
  5. Touchpad
  6. Keyboard
  7. Status LED

A Caps Lock

  1. MSI proactive stylus
  2. USB 3.2 Gen 2 Port (Type-C)
  3. Audio Port Connectors
  4. Webcam Lock Switch
  5. Card Reader
  6. Thunderbolt (Type-C)
  7. Status LED

Battery Status
Continuously blinking if the battery fails. If the problem persists, please contact your local authorized retailer or service center.

  1. USB 3.2 Gen 1 Port
  2. Ventilator
  3. Ventilator
  4. Battery Reset Hole
  5. Stereo Speakers

Getting Started (for reference only)

  • Connect the AC Power
  • Power On the Notebook

Connect the AC Power

It is strongly recommended to connect the ACIDC adapter to the notebook and use the AC power while using this notebook for the first time since some models may require the ACIDC adapter to be connected in order to power on the notebook safely and properly.

  1. Unpack the package to find the AC/DC adapter and power cord.
  2. Attach the power cord to the connector of the AC/DC adapter.
  3. Plug the DC end of the adapter to the notebook, and the male end of the power cord to the electrical outlet.

Power On the Notebook

  • When the AC power is connected, press the power button to turn the notebook on.

Function Keys

  1. A. Power ON or wake up the notebook.
  2. B. Enable or disable the default FN function keys.
  3. C. Mute the built-in speakers.
  4. D. Decrease the built-in speaker’s volume.
  5. E. Increase the built-in speaker’s volume.
  6. F. Enable or disable the touchpad function.
  7. G. Enable or disable the microphone function.
  8. H. Enable or disable the Webcam function.
  9. 1. Switch the Creator Center to High-Performance Balanced/ Silent/ Super Battery scenario.
  10. J. Select a keyboard backlight LED level.
  11. K. Decrease the LCD brightness.
  12. L. Increase the LCD brightness.
  13. M. Switch the display output mode
  14. N. Rotate the screen upside down for 180 degrees.
  15. O. Take a screen capture.

CE Conformity

Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:

  • RED 2014/53/EU; Low Voltage Directive 2014/35/EU; EMC Directive
  • 2014/30/EU; RoHS Directive 2011/65/EU; ErP Directive 2009/125/EC.
  • Compliance with these directives is assessed using applicable European Harmonized Standards.
  • The point of contact for regulatory matters is MSI, MS-NL Eindhoven 5706 5692 ER Son.

Products with Radio Functionality (EMF)

This product incorporates a radio transmitting and receiving device. For notebook computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions. Products can be operated without maintaining a separation distance unless otherwise indicated in instructions specific to the product.

Restrictions for Products with Radio Functionality

(select products only)MSI Summit-E13FlipEvo-
A11MT-021-FIG-5

Find User Manual at C:\WindowslUser ManualNUser Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals