CONAIR CHV28 Infiniti Pro Smooth Waves Mega Volume 2-inch Roller Setter Instructions
- June 5, 2024
- ConAir
Table of Contents
CHV28 Infiniti Pro Smooth Waves Mega Volume 2-inch R oller
Setter
Instructions Manual
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be followed, the following:
READ ALL INSTRUCTIONS BEFORE USING.
KEEP AWAY FROM WATER.
DANGER – Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:
- Always unplug appliances immediately after use.
- Do not use it while bathing or in the shower.
- Do not place or store appliances where it can fall or be pulled into a tub or sink.
- Do not place in, or drop into, water or other liquids.
- If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING – To reduce the risk of burns, electrocution, fi re, or injury to persons:
-
This appliance should never be left unattended when plugged in.
-
Do not pull, twist, or wrap the line cord around the appliance.
-
Close supervision is necessary when the unit is used by, on, or near children or individuals with certain disabilities.
-
Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer.
-
Never operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
-
Keep the cord away from heated surfaces.
-
Never use it while sleeping.
-
Never drop or insert any object into any opening or hose.
-
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
-
The unit is hot when in use. Do not let heated surfaces touch eyes or skin.
-
Never block the air openings of the appliance or place it on a soft surface such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint and other debris.
-
Do not use an extension cord with this appliance.
-
Do not touch the hot surfaces of the appliance.
Use handles or knobs. -
Use the hair setter on a level surface.
-
Do not touch the metal rails that heat the rollers, nor the aluminum posts that heat the rollers – they are hot.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
How to operate your hair setter
- Place hair setter on a firm, flat surface. With the lid closed, plug the cord into the outlet. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- Never leave your hair setter plugged in and unattended. Always unplug the hair setter when not in use. Allow the hair setter to cool down after use. Store the unit in a safe place.
- When using the hair setter, your hair should be clean and dry (or slightly damp), never wet.
HOW TO STYLE YOUR HAIR
- Place the ends of the hair on a roller and wind toward the scalp. Roll hair up firmly. Open the plastic clip, position it on the roller, and gently slide the plastic clip toward the scalp for a firm hold. Do not place plastic clips in roller slit.
- The wave is regulated by the temperature and the length of time the roller is left in your hair.
- Leave rollers in hair for 10 minutes or until rollers are cool before removing.
- Removing roller: When the roller cools, hold the roller in one hand and remove the plastic clip with the other. Then gently remove from hair (do not pull) and let hair bounce back after the roller has been completely removed. Let cool for one minute and then style your hair. These hot rollers are 2 inches in diameter, which help smooth and add volume to your hair.
IMPORTANT: After using the hair setter several times, you will find the
best timing for the texture of your hair and for the result you desire.
Jumbo rollers create smooth, sleek lines of softer, sophisticated hairstyles
and add volume.
STYLING TIPS
For soft curls and waves, use one or two rollers on the top front layer of
your hair. Use the remaining rollers on the sides and back of the head. The
hair should be taken in equal sections and rolled under, toward your neck.
After eight to ten minutes the rollers can be removed. Let hair cool for one
minute and then style.
8-2 INCH ROLLER HAIRSETTER
SMOOTH WAVES / MEGA VOLUME
REPLACEMENT PARTS
Model | Description | Price |
---|---|---|
RPPC-2 | 10 Plastic Clips | $7.75 |
RP3CHV28 | 3 Jumbo Rollers | $7.75 |
Please add postage and handling to all orders.
Postage and handling are as follows: Any order up to $5.00 – add $.50 to the
order. Any order from $5.01 to $10.00 – add $1.00 to the order. Any order from
$10.01 and over – add $1.50 to the order.
Name: __
Address:
City: State: __Zip: __
Daytime Phone: () ____
Note: Prices are subject to change without notice. When ordering outside the continental U.S.A., consumers must include the cost for airmail and parcel post. Allow 4 to 6 weeks for delivery. Outside the U.S.A., payments must be drawn on U.S. banks, in U.S. dollars only.
Please ship to:
Conair Corporation
150 Milford Road
East Windsor, NJ 08520
GETTING TO KNOW YOUR HAIR SETTER
- 8 2-inch Diameter Ceramic Flocked Rollers
- 8 Plastic Clips
MAINTENANCE
Your hair setter is designed for household use and is virtually maintenance- free. This product represents the highest standards of workmanship and engineering research.
If cleaning becomes necessary, disconnect the appliance from the power source. Allow the setter to cool. Clean the unit and the metal rails with a damp cloth. (Occasionally you may want to clean the rollers. Use a damp cloth and mild detergent or soap.) If any abnormal condition occurs, unplug the hair setter, allow it to cool, and return it to an authorized service representative for repair.
STORAGE
Allow hair setter to cool. Handle cord carefully for longer life; avoid jerking or straining at plug connections. Place hair setter out of reach of children in a safe, dry location.
WARNING: IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF , YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination. But did
you know that an electric appliance is still electrically live even if the
switch is off?
If the plug is in, the power is on. So when you are not using your appliances,
keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES
LIMITED THREE-YEAR WARRANTY
Conair will repair or replace (at our option) your unit free of charge for 36
months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the
service center listed on back, together with your purchase receipt and $5.00
for postage and handling.
California residents need only provide proof of purchase and should call
1-877-838-3363 for shipping
instructions. In the absence of a purchase receipt, the warranty period shall
be 36 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE 36-MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR
IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or limitation of special,
incidental, or consequential damages, so the above limitation may not apply to
you.
This warranty gives you specifi c legal rights, and you may also have other
rights, which vary from state to state.
Please register this product at:
www.conair.com/registration
Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
©2012 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
IB-11830
12PH136636
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>