Tribest SS-4200 Solostar 4 Horizontal Slow Masticating Juicer User Manual

Tribest SS-4200 Solostar 4 Horizontal Slow Masticating Juicer

IMPORTANT SAFETY INSTRUCTIONS

1. Please read all instructions carefully.
2. Do not submerge the Main Body in water or other liquids to protect against the risk of electric shock.
3. Do not touch the electric plug or outlet with wet hands to avoid electric shock.
4. While the Solostar 4 1S in operation, avoid contact with its moving parts.
5. Unplug the Solostar 4 from the electrical outlet and be sure to switch the Solostar 4 oft before assembling or disassembling and when not in use.
6. Do not operate any appliance with a damaged cord or plug, or if the Solostar 4 malfunctions, is dropped, or is damaged in any manner. Return the Solostar 4 to the nearest authorized service center for examination and possible repair to prevent injury.
7. Close supervision is necessary when any appliances are used by or near children.
8. Use only included accessories. Do not put any articles such as spoons, forks or knives into the Feeding Chute.
9. it is very dangerous to place fingers into the Feeding Chute hile the Solostar 4 is in operation. Make sure to always use the provided Plastic Plunger to push down ingredients.
10. Use of attachments not recommended or sold by the manufacturer may cause fire, electrical shock, or injury.
11. .Do not let the cord hang over the edge of a table or counter.
12. Do not let the cord contact any hot surface, such as the stove.
13. Please refer to “When You Need Service in case your juicer is functioning abnormally.
14. Do not disassemble any parts other than those necessary for normal operation or cleaning of your Solostar 4
15. Continuous operation of the Solostar 4 (more than 30 min. of straight use) may cause the motor to overheat. Ihe motor will automatically shut down when overheated or overloaded. When this OCCurs, turn the machine off and let the motor cool off for about 30 min before resuming operation.
16. Do not use hot or boiling water (above 104°F or 40°C) to clean the unit and parts. DerormatiOn or other damage may resuit.
17. Do not USe any bleach or harsh chemicals
18. Do not use outa00rs.
19. This machine is made for nousenioia use Only.
20. Please refer to the “Assembly and Operation” before operation.
21. Your Solostar 4 Juice Extractor should be grounded electrically for proper and safe operation. Use only the 3-prong plug provided, the proper plug or the adapter complying With the electrical safety code in your country.
22. Do not use the appliance for any other than its intended use.

JUICER PART DESCRIPTION

1. Screen Locking Cap
2. Juicing Screen
3. Auger
4. Auger Housing/Feeding Chute
5. Funnel
6. Auger Housing Retaining Ring
7. Main Body
8. Homogenizing Screen
9.  Juice Container
10. Pulp Container
11. Juice Container Strainer
12. Hand-held Strainer
13. Power Cord
14. Fettuccini Nozzle
15. spaghetti Nozzle
16. Juicing Nozzle
17. Homogenizing Nozzle
18. Plastic Plunger
19. Cleaning Brush
20. funnel Lid

SOLOSTAR 4 ASSEMBLY AND OPERATION

1. Insert the Auger into the Auger Housing and attach to the front of the Main Body.
2. While holding the Auger Housing stable, turn the Auger Housing Retaining Ring clockwise (right) to lock the Auger Housing in place.
3. Pick the desired screen according to thefoods being used. Do not turn the screen.

Assemble as follows:

1. Juicing Screen: for juicing leafy greens, vegetables and fruits.
2. Place the Juicing Screen into the front end of the Auger Housing. Make sure that the side labeled ‘UPPER’ is facing upwards when inserted.
3. Put the Screen Locking Cap over the screen and turn it counter-clockwise (left) to lock in position.
4. Attach the Juicing Nozzle to the Screen Locking Cap by turning it counter-clockwise.
5. vegetables and fruits.
6. Place the Juicing Screen into the front end of the Auger Housing. Make sure that the side labeled ‘UPPER’ is facing upwards when inserted.
7. Put the Screen Locking Cap over the screen and turn it counter-clockwise (left) to lock in position.
8. Attach the Juicing Nozzle to the Screen Locking Cap by turning it counter-clockwise.
9. Place the Funnel over the Feeding Chute of Auger Housing. Place the Juice Container underneath the specified Juice Outlet and the Pulp Container underneath the Nozzle. Attach the Power Cord to the rear of the machine and plug the other end into an electrical outlet.
10. Turn the Solostar 4 on and feed fruits and vegetables in small amounts, into the Funnel. Use the Plastic Plunger for assistance in pushing the food down.
11. Food needs to be cut into smaller lengthwise pieces before juicing.
12. There may be some squeaking noises while operating, this is normal.
13. If any hard or foreign objects are put into the Solostar 4 and result in the motor stops, use the Reverse Switch 2-3 times for about 2 to 3 seconds
14. When you need to use the Reverse Switch during normal operation, press the Stop Switch first then the Reverse Switch.

NOTE

• Fibrous vegetables or fruits with seeds can be juiced by using the Homogenizing Nozzle instead of Juicing Nozzle.
• Small amounts of pulp can be in juices depending on the produce used.

DISASSEMBLING AND CLEANING THE SOLOSTAR 4

1. Unlock the Auger Housing Retaining Ring by turning it counter-clockwise and (2) pull the Auger Housing to separate from the Main Body.
2. For easier cleaning, take the Auger Housingto your sink and disassemble the parts under running water.
3. Separate the Screen Locking Cap and (2)Nozzle from the Solostar 4 by turning clockwise.
4. Pull to remove the Screen and wash thoroughly using the included Cleaning Brush.
5. Remove Auger from the Auger Housing.
6. Use lukewarm water with mild detergent towash all parts.

NOTE

• For easier disassembly, run the Reverse Switch on for 2-3 seconds, then turn off and unplug the Solostar 4 before disassembly.
• Be sure to clean and properly store the parts of the Solostar 4 after every use. When the Screens are not cleaned after use, the residue can dry, blocking the holes from filtering and juicing.
• Do not use hot water or any harsh chemicals such as bleach to clean the Solostar 4. It can result in the deformation of parts.
• To remove colored stains, soak parts in 70% White Wine Vinegar and 30% Water.

TROUBLESHOOTING

SYMPTOM                                                          SOLUTION

There is no power.| • Make sure the electrical cord is properly put into the outlet.
---|---
Loud Noise| • Make sure the Solostar 4 is leveled on a flat surface.

• Make sure that the unit corresponds to the voltage in your country.

Difficulty in feeding foods into the machine| • Produce needs to be cut into smaller lengthwise pieces.

• The Solostar 4 may be operating in reverse.

The motor has stopped| • You may have overloaded the Solostar 4; reduce the volume of produce in half.

• Foreign substances may have been inserted.

The Auger Housing is stuck or hard to take out.

| • The Auger Housing Retaining Ring is not moving or is too tight.

• Try pressing the reverse switch 2 –3 times.

The Auger Housing does not fit onto the Main Body| • There may be foreign materials inside.

Juice leaks from the back of the Auger Housing

| • You may have overloaded the unit; reduce the amount of produce being put in.

WHEN YOU NEED SERVICE

In the unlikely event that you do need service on your Solostar 4 Juice Extractor, or if it fails to function properly while within the warranty period (normal household operation only) – contact the nearest authorized Solostar 4 Service Center. PLEASE FOLLOW THE INSTRUCTIONS BELOW:

If You Need Service

• Call to obtain a Return Authorization Number to send your Solostar 4 or part back to the service center. Explain the problem you are experiencing.
• Pack your Solostar 4 or part securely in the original shipping box. Make sure all necessary parts are enclosed. Fill out the Service Request Form and enclose it in the shipping box.
• Securely seal the shipping box.
• Address the box to the service center. Be sure to put your return address and the Return Authorization Number on the outside of the package.
• It is always wise to insure the package against possible damages or loss in transit. Ship prepaid.

References

• Shop Tribest | USA Official Site | Making Heathy Living Easy | Tribest
• Shop Tribest | USA Official Site | Making Heathy Living Easy | Tribest
• Shop Tribest | USA Official Site | Making Heathy Living Easy | Tribest

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>