ANKER A1254 Power Bank User Manual
- June 5, 2024
- Anker
Table of Contents
ANKER A1254 Power Bank
Charging Your Phone while Playing Games
- Place your phone horizontally and extend PowerCore to fit your phone’s dimensions.
- Charge your phone via the USB-A or USB-C port.
- The LED indicator will turn blue, and the built-in fan will activate.
While charging your phone, the built-in fan is on by default. To turn the fan on or off, press the power button twice. We recommend keeping the fan on in case your PowerCore gets too hot.
- When your phone is disconnected from PowerCore, the fan will turn off.
- The length of your phone must be between 5.7 – 6.5 in / 145 – 164 mm.
Using as a Stand
PowerCore can also be used as a stand to make watching videos easier.
Recharging Your PowerCore
Recharge your PowerCore using a USB-C cable.
- When your PowerCore is fully charged, the LED indicators will turn off.
- For the fastest and safest charge, use an Anker® cable, your device’s original cable, or another certified cable (such as MFi).
Specifications
- Cell Capacity
- 6,700mAh / 24.32Wh
- USB-C Input
- USB-C5V 2A
- Output USB-A 5V 2.4A
- USB-C 5V 3A
- Total Output: 5V 3A
- Size: 169 × 88 × 38 mm / 6.7 × 3.5 × 1.5 in
- Weight 236 g / 8.3 oz
Important Safety Instructions
When using this product, basic precautions should always be followed, including the following:
-
Store the product in a cool and dry place.
-
Do not store the product in a hot or humid environment.
-
Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
-
The operating temperature should be between 0℉C to 25℉C / 14℉F to 77℉F.
-
Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a
risk of fire or injury to persons. -
If the product is not used for long periods of time, you should charge and discharge it once every three months.
-
When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
-
In normal conditions, the battery performance will decline over several years.
-
Do not dispose of the product in heat or fire.
-
Do not clean the product with harmful chemicals or detergents.
-
Misuse, dropping, or excessive force may cause product damage.
-
When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
-
Be aware that discharged battery may cause fire or smoke. Tape the terminals to insulate them.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A1254 is in
compliance with Directives 2014/35/EU, 2014/30/EU & 2011/65/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.anker.com
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich,
Germany
Anker Technology (UK) Ltd | Suite B, Fairgate House, 205 Kings Road,
Tyseley, Birmingham, B11 2AA, United Kingdom Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Customer Service
18-Month Limited Warranty
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>