blizzard BPO1 Countertop Pizza Oven User Manual
- June 5, 2024
- blizzard
Table of Contents
- IMPORTANT SAFETY INFORMATION
- Identification of Key Parts
- Circuit diagram
- INSTALLATION OF YOUR OVEN
- BEFORE USING YOUR OVEN
- Using Your Oven
- Typical Operation Sequence
- Timer
- Temperature Control Knob
- Power Indicator Light
- Protection Component
- Cleaning & Maintaining Your Oven
- Troubleshooting
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
User Manual Countertop Pizza Oven
Models: BPO1, BPO2
Please read and keep these instructions. Indoor use only.
IMPORTANT SAFETY INFORMATION
When using electrical appliances, basic safety precautions should always be followed, including the following:
- Read all instructions carefully and completely.
- For commercial use only.
- Do not touch hot surfaces.
- Protect against electrical shock by keeping all cords, plugs, and other electrical components away from water or other liquids.
- Switch off power supply and unplug this unit when not in use and before cleaning.
- Allow the unit to cool before putting on or taking off parts and before cleaning.
- Do not operate this or any appliance with a damaged electrical cord or plug.
- Do not operate this or any appliance after it has malfunctioned or been damaged in any way.
- Do not use outdoors.
- Do not place on or near a hot gas or electric burner.
- Attach plug to appliance first, then plug electrical cord into the wall outlet.
- Disconnect the unit by turning the temperature and timer control to “OFF”, then removing the electrical plug from the wall outlet.
- Do not use appliance for any application other than intended use.
- Do not insert metal utensils or oversized foods into this unit as they may cause a fire and heighten the risk of electrical shock.
- Do not store any item on top of this unit when in operation.
- Do not allow this oven to touch or be covered by flammable material, such as curtains, draperies, walls, etc., when in operation.
- Do not clean with metal scouring pads as pieces can break off and touch electrical components, heightening the risk of electrical shock
- Never place materials such as paper, cardboard, plastic, etc. in this oven.
- Do not cover interior of this unit with metal foil as it may cause the oven to overheat.
- Avoid scratching the surface or nicking the edges of this unit’s tempered, safety glass door. If the oven door has a scratch or nick, contact customer service before use.
- Turn the appliance off by turning the temperature and timer control to the “OFF” position.
- . Note that the use of accessories not recommended by the manufacturer may result in injury.
- Children should be supervised to ensure that they do not play with the oven.
- This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- When using the appliance in shops, snack bars, hotels etc., check the voltage and outlet to make sure the appliance is correctly connected with power.
- Place unit on a flat surface that is well ventilated. The appliances must be supervised during operation, DO NOT leave appliance without powering off.
IMPORTANT!
Ensure a gap of at least 100mm is provided all the way around the
appliance for ventilation. Ensure all ventilation slots in the rear and
side panels are not obstructed. The Feet MUST BE FITTED before use .
NOTE: Save these instructions for future reference.
Identification of Key Parts
1. Main body | 6. Light switch |
---|---|
2. Timer knob | 7. Power switch |
3. Temperature knob | 8. Door |
4. Bottom heating element switch | 9. Rubber feet |
5. Top heating element switch
Circuit diagram
NOTE! The Timer does not switch off the oven, it is a mechanical timer (minute minder)
INSTALLATION OF YOUR OVEN
BPO1: 220-240V/50Hz, 2400W; fit for 1×16”(40cm) pizza. A 13 Amp socket outlet
required
BPO2: 220-240V/50Hz, 4800W. fit for 2×16”(40cm) pizza. A dedicated 30Amp power
supply is required
All electrical connections must comply with specifications and power
standards, the installation operation must be done by qualified personnel.
All models are countertop type, put the oven in a flat surface, and leave
enough space (suggested 100mm&4”) for the air ventilation.
BEFORE USING YOUR OVEN
Before cooking anything in your pizza oven for the first time, please
follow these simple instructions:
Using a small amount of mild detergent in warm water with a cloth, clean the
handle and roasting racks with soapy water.
(NOTE: Do not use a spray or abrasive polishing agent.) Gently wipe down
interior walls with a damp cloth. While cleaning this unit, do not to touch
the electric heating element. Do not soak the inside of the oven with water.
After cleaning and thoroughly drying the surfaces noted above, open the oven
door and place ceramic pizza deck into the bottom with the slots on front of
deck facing front of the oven. Close the oven door and preheat the oven to its
highest temperature setting for 5 minutes.
Turn off the heating elements and open the oven door in order to remove any
smoky residue from inside the oven. The heating elements are well lubricated
and this initial use will help burn off the extra grease. A light amount of
smoke is normal during this process.
Using Your Oven
To start your oven, you need to turn on the power switch, then turn on heater
switch to switch on upper and lower elements individually or together and set
the temperature dial to set your desired cooking temperature, the pizza oven
will start to work. Pre-heat the oven for 15 minutes before cooking, Turn on
the light switch to operate the light of the pizza oven. When turn on the
power switch, set the temperature and time, heating elements of top and bottom
can open or stop separately, once the temperature is reached, the heating
elements would stop working. When the temperature gets lower, heating elements
will start to work again.
This oven has high-temperature protection function, once the inner temperature
gets too high, the pizza oven will automatically shut off. If you would like
to reset the temperature limiter.
CAUTION: During the baking process, make sure that no metal accessory
comes in contact with the electric heating elements.
CAUTION: Foods baked in this oven will be hot. The casing and door will
become very hot. Use the cool door handle and wear protective hand and forearm
coverings when reaching into the oven to retrieve food.
Typical Operation Sequence
ACTION | RESULT |
---|---|
Plug in your pizza oven | Power is connected, press power switch to turn on. |
Adjust the temperature control knob | The heating indicator light comes on; |
heating elements begin to heat up
The temperature light shuts off| Oven has reached desired temperature
Load product into oven| Product will begin to cook
Set timer to desired cook time between 0-30 min| Timer starts timing down
Timer reaches zero| Timer chimes as warning, pizza oven still heating
Unload oven| Product will be cooked/hot; use caution removing it from the oven
Timer
The range of the timer on this unit is 0-30 minutes. Turning the timer to the
“0” position, the cooking time is over and the timer will “ding” to alert..
The oven will still be heating even the cooking time is over.
If you need to reset the baking time while the oven is in operation, simply
turn the timer to a new position. The oven will reset the time according to
the revised requirement without needing to be turned off.
Temperature Control Knob
The temperature range of this unit is 50-400°C/125-750°F. This thermostatic controls the temperature inside the oven and helps to maintain the proper temperature during various heating, roasting, and baking applications. If the top and bottom heaters are switched on, the heater switch will illuminate when heating, the oven is at temperature when the lights on the heater selector switches go out.
Power Indicator Light
Any time this appliance is connected to the power supply with the power switch turned on. The power indicator light will be on when set the temperature and time.
Protection Component
If the temperature of this oven reaches an unsafe limit, the electrical components will shut off and it will stop operating in order to prevent overheating.
Cleaning & Maintaining Your Oven
To clean, first remove the power cord’s plug from the wall outlet. Wait for the oven to cool. Use a damp cloth or sponge to gently wipe down the inside of the oven. Avoid soaking the inside of the oven or washing it in running water as this will cause serious damage to the unit. DO NOT USE harsh sanitizing spray, wipe the external panels with a damp cloth, dry and clean with stainless steel cleaner.
Troubleshooting
Problem: The pizza oven does not work.
- Be sure that the plug is connected and switched on, check the fuse and circuit breakers.
- Be sure that the electricity is normal.
Problem: There is a metallic sound when the oven is in use.
- Do not attempt to dismantle the oven.
- Contact your service agent right away to examine.
Problem: Food is often overcooked or burned, even when cooked according to the recipe.
-
Contact your service agent to examine the temperature control knob.
Problem: The pizza oven cannot reach to set temperature. -
Ensure that top heating element turn on as well, if only turn on bottom heating element will have such a situation.
Problem: The pizza oven is not heating but inner light can turn on. -
Check both heater switches are in the on position and the thermostat is set correctly.
-
Contact your service agent to examine the pizza oven
Disposal:
**** EU regulations require products to be disposed of by specialist
companies who remove or recycle products, including electronic, metal and
plastic components Consult your local waste collection authority regarding
disposal of your appliance. Local authorities are not obliged to dispose of
commercial equipment but may be able to offer advice on how to dispose of the
equipment locally. All packaging materials should be disposed of in an
environmentally friendly way. The cardboard may be used as
scrap paper. The protective foil and the foam cushions are CFC-free. Do not
allow children to play with the packaging and destroy plastic bags safely.
Environmental protection:
Discarded electric appliances are recyclable and should not be discarded in
domestic waste! Please actively support us in conserving resources and
protecting the environment by returning this appliance to the collection
centers (if available).
Compliance
Parts have undergone strict product testing in order to comply with regulatory
standards and specifications set by international, independent, and federal
authorities. Products have been approved to carry the following symbol:
Pentland Wholesale Ltd. Unit17 Walker Park Industrial Estate Walker Rd.,
Blackburn, BB1 2QE.
TEL: 01254614444 www.pentlandwholesale.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>