elgato Wave XLR Audio Mixer and 75 db Preamp User Guide
- June 5, 2024
- elgato
Table of Contents
Wave XLR Audio Mixer and 75 db Preamp
User Guide
Part: 51MAG9901
Wave XLR Audio Mixer and 75 db Preamp
-
Download the Elgato Wave Link app to get started.
-
Use the supplied USB-C cable to connect Wave XLR to your computer.
-
Condenser microphone = 48V LED must be ON.
Dynamic microphone = 48V LED must be OFF.
Toggle phantom power by pushing the control dial for 2 seconds. -
Connect your mic using a standard XLR microphone cable.
-
Connect your headphones to the 3.5 mm jack.
**** Keep the monitoring volume moderate to protect your hearing! -
Push the control dial to toggle between Mic Gain, Headphone Volume, and Mic/PC Mix.
-
Tap the capacitive sensor on the back of the unit to mute or unmute.
-
Easily switch out the faceplate to personalize your setup.
| A13fS | Cd | TS Pb | Hg | Cr6 | PBBs | PBDEs |
|---|---|---|---|---|---|---|
| Electric Components | 0 | X | 0 | 0 | 0 | 0 |
| PCB | 0 | 0 | 0 | 0 | 0 | 0 |
| Cables | 0 | 0 | 0 | 0 | 0 | 0 |
| Plastic housing | 0 | 0 | 0 | 0 | 0 | 0 |
| Knob | 0 | 0 | 0 | 0 | 0 | 0 |
| Weight | 0 | 0 | 0 | 0 | 0 | 0 |
| Rubbers | 0 | 0 | 0 | 0 | 0 | 0 |
| PET diffusor | 0 | 0 | 0 | 0 | 0 | 0 |
| Screws | 0 | 0 | 0 | 0 | 0 | 0 |
| Light guide | 0 | 0 | 0 | 0 | 0 | 0 |
| Shielding box | 0 | 0 | 0 | 0 | 0 | 0 |
| Shielding cover | 0 | 0 | 0 | 0 | 0 | 0 |
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user`s authority to operate this
equipment. For questions about Elgato product compliance with FCC regulations,
please contact: Compliance Officer, Corsair Memory Inc., 47100 Bayside Pkwy,
Fremont, CA 94538, USA
THIS PRODUCT HAS BEEN DESIGNED TO ASSIST YOU IN REPRODUCING MATERIALS IN WHICH
YOU OWN THE COPYRIGHT OR HAVE OBTAINED PERMISSION TO COPY FROM THE COPYRIGHT
OWNER. UNLESS YOU OWN THE COPYRIGHT OR HAVE OBTAINED PERMISSION TO COPY FROM
THE COPYRIGHT OWNER, YOU MAY BE VIOLATING COPYRIGHT LAW AND BE SUBJECT TO
PAYMENT OF DAMAGES AND OTHER REMEDIES. IF YOU ARE UNCERTAIN ABOUT YOUR RIGHTS
YOU SHOULD CONTACT YOUR LEGAL ADVISOR.
Rating: 5 V, 500 mAh
R-R-CSI-20MAG9901
Applicant Name: Corsair Memory, Inc.
Product Name: Elgato Wave XLR
Model No: 20MAG9901
Manufactured Year & Month: Please refer to the gift box sticker
Manufacturer & Country of Origin
Corsair Memory, Inc./ Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>