MINISO M4 Sport Smart Bracelet User Manual
- June 5, 2024
- MINISO
Table of Contents
M4 Sports Smart Bracelet
User Manual
SPORT SMART BRACELET(BLACK) BRACELET INTELLIGENT SPORT(NOIR)
MODEL: M4
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT
PROPERLY.
CAUTIONS
- Charge the product fully before use.
- Do not wear it when you are swimming, having a shower, or bath.
- If you are not going to use the product for a long time, please charge it once every 3 months to maximize its lifespan.
PARAMETERS
- BT version: 4.2
- Battery capacity: 3.7V 50mAh
- Waterproof: IPX4
- Screen resolution: 80×160
- Input: 5V= 0.05A
PRODUCT OVERVIEW
- Function button
- Display
- Sensor
OPERATION INSTRUCTIONS
Charge the bracelet
Before first use, try to turn on the device to check if the battery level is
low. If you failed, you should charge the product with a charger; then the
bracelet will turn on automatically.
Take out the main part of the bracelet.
Install the main part into the USB charger.
Insert the USB charger into a computer or a power adapter for charging.
2. Install the bracelet app on your phone
Scan the OR code or go to the App Store to download and install the app.
Supports: Android 4.4 or above, iOS 9.0 or above.
Bluetooth 4.2
Device connection
Before first use, connect it to the APP for calibration. After the connection,
the bracelet will automatically synchronize the time. Enable Bluetooth on your
phone- open the APP —. click “Bind Device” After the pairing, the APP will
automatically save the Bluetooth address of the bracelet, and when the APP is
opened or running in the background, it will automatically search and connect
the bracelet. For use on Android phones, the APP requires permission to access
sensitive data on your phone such as contact information; besides, you should
allow the APP to run in the background.
Bracelet function
Turn on: when the device is turned off, long-press the function button for
more than 3s to turn it on. Reset bracelet: this operation will erase all data
in the bracelet (such as the number of steps). Light up the screen: when the
device is turned on, short press the function button. Set the theme of the
clock page: the default clock page on the bracelet can be changed. You can
control the settings by entering the “more” menu. If there is no operation for
5s, the screen will turn off automatically.
ACCESSORIES
- Bracelet x1
- USB charger x1
- User Manual x1
TROUBLESHOOTING
- The bracelet is unable to be paired with the cell phone. Solution: Confirm if the bracelet has been turned on, and if the Bluetooth on your phone is toggled on. Then delete the product in the list, and pair it with your phone again according to the User Manual.
- The bracelet is unable to be turned on. Solution: Confirm the battery level. Charge the bracelet fully if it is needed.
- Can the battery of the bracelet be replaced? Solution: No, this is a lithium polymer battery, which is irreplaceable.
- The link between the bracelet and the cell phone has been disconnected within 10 meters.
Solution: Bluetooth is wireless so it is very sensitive to objects between the bracelet and the connected device. Check if there are any metal or other objects that may affect the connection within the effective distance.
FCC Warning : Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment. This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable devices:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
MADE IN CHINA
FABRIC:ME EN CHINE
HECHO EN CHINA
www.miniso.com