iGear iG-BT019 Retractor Wireless Voice Assist User Manual

iGear iG-BT019 Retractor Wireless Voice Assist

For user’s safety, please read this manual before using the Headphone

Instruction

The following matters should be paid attention to when using headphones:

1. Avoid the use of high volume as it may lead to hearing damage.
2. Avoide using it for a longer period of time.
3. Using headphone while driving is not recommended.
4. Clean the headphones using a dry, soft, clean cloth.

The headphones should not be stored or used in temperature below 150 C (50 F) or higher than 550 C (1310F), otherwise will reduce headphones or battery life.

Warning:
Please charge only with original charging cable.

1. Turn off the headset before charging.
2. Insert the USB charging cable to earpiece jack. The headphones red light flashing means it is charging.
3. The headset needs about 2 hours to get fully charged

Package content

• Headset 1pc
• USB charging cable 1pc
• Earbud 3pcs
• User Manual 1pc
  • Push “ON”, the headset will prompt for “Power ON” with vibration; if red and blue light flashing alternately means it’s ready for pairing with your device.
  • Switch to OFF to turn off the headset, it will prompt “Power OFF”.

Bluetooth connection steps

1. Please keep your headset and mobile phone as close as you can, within 1 meter.
2. Switch to “ON”, it will prompt “pairing” after 5 seconds, and then red and blue lights flashing alternately when headset is on and ready for pairing.
3. Turn on “Bluetooth” in setting (your device) and find headset’s Bluetooth name BT-109.
4. Click BT-019, Bluetooth headset gets connected with your mobile phone automatically. (some may require pass code which is 0000)

Pair the headset with 2 mobile phones

1. After successfully paired with a mobile phone, close the Bluetooth function of the mobile phone, and switch the button of BT-019 to OFF.
2. Same procedure to get the 2nd mobile phone paired with the Bluetooth headset.
3. Turn on the Bluetooth function of the 1st mobile phone; choose “BT-019” to finish the pairing status with the 2nd mobile phones.

Note:

1. With you previously paired device’s Bluetooth turned on and in range, turn on BT-019. The headset will automatically reconnect to the same Bluetooth device that connect last time. If you have a previously paired device that dose not auto-reconnected, navigate to the Bluetooth settings menu on your device, turn on the Bluetooth feature, and select
   “BT-019” from your list of paired Bluetooth devices.

2. Pairing time exceeds 3 minutes, BT-019 will automatically shutdown ; in 3 minutes back to the effective distance can automatically return to the last connected device.

3. P.S.: If connected with two mobile phones, only mobile phone 1 supports wireless music and you can start conversation for both mobile phones. Battery check up through iPhone.

• Answer & End call / Incoming call vibration remind Answer phone call
  When there is incoming call, there will be a vice prompt, like “incoming call 134….2578 (phone number will be broadcasted)”. Click MFB to answer, or just operate your mobile phone.

• End Call:
  Press the multifunction button to hang up call, or by direct hang up your phone call.
  Reject call:
  When there is incoming call, headphone will broadcast “incoming call” with vibration, double click MFB to reject, or just reject it on your mobile phone

• Last number redial:
  Double click MFB.

• Call Transfer:
  Double click the volume “__” when calling to have call transfer between phone and headset.

• EQ Shift:
  Double click the volume “__” when playing music to have different sound effect (low bass boost, normal, high pitch boost). Default setting is low bass boost. Choose your favorite sound effect base on your habit and music style.

• Power prompt:
  Each time turning on BT-019, it will report headset battery power remaining, such as “Battery full”, “battery level high”, “battery level medium”, “battery level low”, “recharge headset”.

• Voice Dial:
  Unlock the mobile phone and double click the volume “+” to launch the voice dial, and then just speak the people name you want to call. This function can work only if your mobile phone support it.

• Play/Pause/Tracks

  • During music playing, single click MFB to pause music, and click again MFB to play it again.
  • During music playing, single click “+/-” to change songs.
  • During the call or listening to music, user can long press “+” or “-” button to adjust the volume.

• Mobile phone anti-lost indicator
  When the Headphone is connected to the smart phone, if the distance between the device and the headphone is more than 20 m, headphone will prompt “Beyond the range of connection”. If coming back to the working distance within 10 mins, the prompt will go off and the devices reconnect automatically. If not coming back to the working distance in 10 min, the headphone will power off. Please switch the button to OFF and then switch to On, to turn the power on, and then headphone will be back to work.

• Restore Factory Settings
  Long press the MFB while charging unite the blue light flashes 3 times.

• Technical index

  • Correpond with: Bluetooth CSR 4.0
  • Support: HSP. HFP. A2DP. AVRCP
  • Transmitting Power: Class 2
  • Working distance: ≤10m
  • Frequency range: 2.4026GHz-2.480GHz
  • Charging time: ≤3.5 hours
  • Talk time: ≥18 hours
  • Music time: ≥16 hours
  • Standby time: ≥300 hours
  •  Weight: 67g

• Imported and Marketed By:
  iGear Tech Pvt. Ltd.
  204, Sai Corporate Park, Laxmi Nagar, Off Link Road, Goregaon West, Mumbai –

• Manufactured by:
  Panorama Tech (HK) Co. Ltd., China
  Name of Commodity: Retractor(iG-BT019)
  Month and Year of Import: June, 2019
  Music Time: ≥ 16 hours
  Standby Time: ≥ 300 hours

• Pairing for 2 mobiles phones Battery: 300 mAh

• Net Weight: 70gm

• Net Quantity: 1 Unit

• Voltage: 5V

  • In case of consumer complaints:
    Toll free number – 1800 22 8495 ,Email : sales@igear.asia (Between 10am to 5pm, Mon- Fri)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>