FPS SECURITY FPC-6355 Exit Button Entry Kits User Guide
- June 3, 2024
- FPS SECURITY
Table of Contents
FPS SECURITY FPC-6355 Exit Button Entry Kits
INSTRUCTION
This Diagram is for kits: FPC-6355
ATTENTION! QUICK TIPS, MUST READ BEFORE INSTALLING:
- You will only need to hardwire the power supply to the mini Receiver and from any electric lock to the receiver.
- The Keypad and Exit buttons are 100% completely wireless. Installation is easier, no wire is needed to connected these devices. Just mount it on the wall and you are good to go .
- In order to properly install this kit it is recommended that you use 18/2 or 20/2 gauge wire . . Before installing this kit, check with your local fire Authority for the compliance of fire codes.
- We are not responsible for the improper Installation of this kit. This is an example of how it should be installed but all applications are different.
- If you are not handy with electrical components, please consult with a certified electrician or Locksmith.
- Make sure that when you are installing this kit, please have all components turned
Need assistance? Contact Us :
1-888-504-3318 support@fpc-
security.com
www.fpc-security.com
Read User Manual Online (PDF format)
Loading......