USTECH B0C6T1LLG8 2 Tier X Shape Folding DIY Luggage Rack Instruction Manual
- June 17, 2024
- USTECH
Table of Contents
USTECH B0C6T1LLG8 2 Tier X Shape Folding DIY Luggage Rack
TOOLS
Assembly Procedure
STEP 1. Assemble Upper Parts
Parts B and C each have 1 longer tube (7.08’x12.79′) and 1 shorter
tube(6.02’×12.79) length at the tops. Before assembling, please notice first
that the strap must be correct (as shown in the figure below).
Please assemble the longer side of Part B into part D and then into the longer
side of Part C.
STEP 2. Assemble Legs And Screw
For the upper part final assemble, a Shorter tube (22.24×12.79 inch) inside, a longer tube (24.4×12.79 inch) outside
STEP 3. Assemble Tubes And Bottom Shelf
Notice:
- There are 2 holes on the Leg (part A). The lower hole is for the horizontal tube (parts J and K). The higher hole is for the bottom shelf (parts H and I)
USTECHT™ is a registered trademark of United Storage Technologies, LLC.®
All Rights Reserved. United Storage Technologies, LLC® Houston, TX77090
For assistance email: info@ustech-usa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>