iGear iG- E2 Symphony Battery Free Wireless Bell User Manual

iGear iG- E2 Symphony Battery Free Wireless Bell User Manual

Before operating, please read this manual carefully. Please follow the instructions properly.

Important

• Do not get the receiver wet.
• Do not disassemble, repair or modify.
• Please screw in securely.
• Do not exceed electrical ratings.

Attention

• Avoid fitting Transmitter/Receiver on or directly nearmetallic surface as this may reduce the range.
• When fitting Transmitter onto a UPVC door frame, always check the operating performance before final installation.

Pack Contents

Transmitter xl, Receiver xl, Adhesive Pad xl User Manual xl, Screws x2, Mounting base xl.

Installation Instruction

Please run a test before installation.

Receiver

Plug the receiver into the outlet. The receiver will perform better when away from electric equipment.

Try adjusting the location of the receiver according to the “Range Guide”.

Transmitter

• Clean the surface where you intend to the transmitter.
• Before mounting the transmitter, please run a test.
• Put receiver and transmitter where you want to mount.
• Close all doors when you test.
• If the receiver has no sound, please see- Trouble Shooting.
• Do not install transmitter on UPVC door frames.
• Do not install transmitter on Metal surface.

Mount the transmitter with screws

1. Place the button mounting base on the required place of the wall screws into it.
2. Carefully push the button down to the stop.

B.Or mount the transmitter with adhesive pad

1. Stick the transmitter to the wall by adhesive pad.
2. Press the transmitter for 30 seconds.

Operation Instruction

• Indicator Light

• Button

• Button

• Adjust sound volume
  Short press Button © on the side of the unit to cycle through 3-class sound volume.

• Select a ringtone
  Short press Button on the side of the unit to cycle through 38 ringtones. Leave it on whichever ringtone you like. Re-plug the Receiver, the tune will turn back to default tone. The transmitter is already paired with the receiver at factory.

Trouble Shooting

1. Metal structures, including door frames, can result in reduced transmission range. Avoid mounting transmitter or receiver on or near metal structures.
2. Other electric equipment can cause radio interference that affects your receiver.
3. Wall, doors and ceilings will reduce the range.

Attention: If the issue is still not resolved by the above methods, please unplug the receiver and wait for about 3 seconds till the indicator light goes off, then re-plug it in. If that does not solve the problem, please contact customer service.

Specifications

–

Power Consumption| 820mW|

–

Water Resistant|

–

| Yes
Operating Forces|

–

| 10N
Dimensions| 85x60x47mm| 79x44x33mm
Weight| 67 g| 55 g
Ringtone| 38 polyphonic ringtones| –

This marking indicates that the product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your sued device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Name of Commodity: Symphony Bell Month and Year of Manufacture: January, 2021
Net Weight: 120gm
Net Quantity:1 Unit
Dimensions: Receiver 85mmx60mmx47mm
Transmitter: 79mmx44mmx33mm
Voltage: AC 240V
Wattage: 820mW
Warranty Period:1 Year

Marketed By

iGear Tech Pvt. Ltd.,
204, Sai Corporate Park, Laxmi Nagar, Off Link
Road, Goregaon West, Mumbai – 400104.
in case of consumer complaints:
Toll free number -1800 22 8495,
Email: sales@igear.asia
(Between 10am to 5pm, Mon- Fri)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>