iGear iG-1023 Dynamo Build Your Party User Manual
- June 5, 2024
- iGear
Table of Contents
iGear iG-1023 Dynamo Build Your Party
Features
Bluetooth wireless connectivity Supports USB/TF card AUX function Karaoke function Rechargeable Lithium battery
Specifications
- Output power : 10W
- Driver unit size : 4Inch
- Impedance : 3 Ohm
- S/N ratio : ≥85dB
- Separation : ≥80dB
- Distortion : ≤10%
- Frequency response : 10Hz-20KHz
- Bluetooth version : V5.0
- Bluetooth range : 10 meters
- Bluetooth pairing name : iGear-Dynamo
- Bluetooth profiles supported : A2DP
- USB & TF max. memory supported : 32 GB
- Battery capacity : Built-in 1200mAh
- Battery type : Li-ion
- Charging indicator : Yes
- Input power : DC 5V
Accessory
- Charging cable : 1piece
- Aux cable : 1piece
- User manual : 1piece
- Remote : 1piece
Connect to Bluetooth device
Turn on the speaker unit and the Bluetooth switch on your mobile/other device and search for the speaker model name “iGear-Dynamo”. Pair the device. Once the device is paired, Bluetooth will automatically connect every time the unit is turned on subsequently.
- Digital Display
- TF-card slot
- Previous / Back button
- Play / Pause button
- Forward / Next button
- Mode button
- USB slot
- 5V charging port
- Mic jack
- AUX-IN jack
- Power on/off and Master volume knob
Bluetooth
Turn on the speaker, it come into the Bluetooth mode directly. After pairing, the device can play music. Short time Pressto Pay/Pause, Short press and to surf through Prev. and Next. Long press and to turn down and turn up the volume.
AUX-IN
AUX-IN using the audio cable into AUX jack, and press ‘M’ to switch to AUX-IN mode. Long press and to turn down and turn up the volume. Under AUX-IN, it can’t shift to Prev. and Next by Bluetooth speaker, but can be controlled by connected devices.
USB/TF card
Insert the U flash memory or TF card into the USB/TF slot. It will read the MP3 format music automatically. Press to Play/Pause. Short press and to surf Prev. and Next. Long press and to turn down and turn up the volume.
FM Radio
Long press to search FM channels automatically. This operation will scan all
FM stations and pre-record them to memory. The scan procedure will take serval
minutes to complete and should not be interrupted. Once complete, you can
short press or to move forward or backward. Long press or to turn down or turn
up Volume.
Note: AUX Port connection can receive the FM radio clearly as, it has the
same function as the antenna.
Charging
Please use the original charging cable to charge Red LED display when on
charging.
iGear Tech Pvt. Ltd., 204, Sai Corporate Park, Laxmi Nagar, Off Link Road,
Goregaon West, Mumbai – 400104.
In case of consumer complaints: Toll free number – 1800 22 8495, Email:
sales@igear.asia (Between 10am to 5pm, Mon- Fri)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>