RENPHO R-M003 Air Purifier for Home Large Room Instruction Manual

: June 5, 2024
: Renpho

RENPHO R-M003 Air Purifier for Home Large Room Instruction Manual

Safety Precautions

The following instructions outline the safe and proper use of the product to prevent unexpected dangers or damages.
Safety-related precautions are classified as follows according to the expected risk, the extent of the damage, and the urgency of the occurrence of the risk in case of incorrect use.
This product is not intended for use by persons (including children) who lack physical, sensory or mental abilities, or who lack experience and knowledge to safely use the product without supervision or instruction.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.

WARNING

Failure to follow the warning may result in serious injury or death.

CAUTION

Failure to follow the caution may result in minor injury or product damage.

WARNING

Do not use a damaged power plugs or a loose outlets.
It may cause electric shock or fire.
If the power plug is damaged, contact the place of purchase or service center to exchange it
Be sure to plug the power plug into AC 110-220V 50/60Hz outlet.
Failure to do so may result in failure or damage.
Do not pull the power cord to move the unit.
Failure to do so may result in injury to the user or damage to the product.
Do not touch the power cord or power plug with wet hands.
Disconnecting the power plug with wet hands may result in electric shock.
Do not damage or deform the power plug by bending it excessively or pressing it with heavy objects.
Failure to do so may damage the power plug, resulting in a fire or electric shock.
Do not connect and disconnect the power plug repeatedly.
This may result in electric shock or fire due to damage to the power plug and outlet. If water has entered the power supply module, carefully unplug the power cable and dry the product completely before use.
Failure to do so may result in electric shock or fire.
Do not use the unit for special purposes such as preservation of artwork or academic materials, or for business use materials, etc.
Failure to do so may cause deterioration in the quality of preserved items. FR

Safety Precautions

Wipe off any dirt or water on the prongs of the power plug.
Failure to do so may result in electric shock, fire or short circuiting.
Do not plug multiple electrical appliances into one outlet at the same time.
This may result in power failure or fire due to overload. If the unit is not be used in a while, disconnect the power plug.
Failure to do so may result in property damage that may occur due to fire.
When opening and closing the filter cover, make sure not to trap your body or foreign objects within the top of the unit.
Failure to do so may cause personal injury or unit failure.
If the power cord is damaged, do not change it and contact the service center to replace the power cord.
This may result in electric shock, injury or fire. Do not install the unit near electric heater.
This may result in fire. Do not place on other electric appliances on the unit, such as heaters and TVs.
It may cause fire, electric shock or other malfunction. Do not install the unit in humid, dusty, or environments where water is present.
Failure to do so may result in electric shock, injury or fire.
Do not use flammable gases or other substances near the unit.
This may result in product damage, electric shock or fire. Do not install the unit on a sloped surface.
This may result in personal injury or product damage.
This may result in water leaks. Do not use sharp objects in or around the sensor; such as picks, knives, scissors, etc.
This may result in electric shock.
If you hear a strange sound, smells burning, or see smoke coming from the unit, immediately unplug the power cord and contact our service center.
Failure to do so may result in electric shock, damage, injury, or fire.
Never soak or submerge the unit into water.
This may result in electric shock, product damage, injury, or fire. Do not spray flammable substances such as pesticides or air fresheners on the air inlet.
It may cause fire or product deterioration.

Safety Precautions

Do not open, repair or modify the unit arbitrarily.

This may result in electric shock, injury or fire due to abnormal operation.
Please contact our service center for repair.
Do not look directly into the vents.
Do not place water containers, chemicals, food, small metals, or flammable substances on the unit.
If any objects enters into the unit, it may cause electric shock, fire, or damage.
If an object is placed on the air outlet, the unit may not operate normally, causing damage or a product malfunction. Disconnect the power plug before cleaning the unit.
Failure to do so may result in electric shock, product damage, injury or fire. Do not spray directly with water or clean the unit with benzene or thinner.
Failure to do so may result in electric shock, product damage, injury or fire. Do not put your fingers or foreign objects into the air inlet or vent.
Failure to do so may result in personal injury or unit failure.
Do not push or lean on the unit. The unit may fall over.
Failure to do so may cause personal injury or unit failure.
This may result in water leaks.
Do not allow children to play with, hang on, or climb over the unit.
Failure to do so may cause personal injury or unit failure.

CAUTION

Install the unit on stable and horizontal ground.

Vibration may occur when used in a place such as on a carpet.
Using it on a carpet or blanket may cause the sensor to malfunction or fall over. Make sure to properly reassemble the parts after cleaning.
Operating without parts such as the filter and filter cover may cause malfunction.
Do not install the unit in a location where there are strong odors, smoke, or oil, such as in cafeteria or meat restaurant.
Failure to do so may cause fire or deterioration.
Do not install the unit in a location exposed to direct sunlight.
It may cause discoloration or deterioration.
Allow at least 15.7inch of distance from the unit and its surroundings/ other objects. Leave at least 3.3ft of open space above the unit.
Otherwise, objects around the walls and ceiling may be contaminated.
It is recommended to use this product at 50°F-104°F, relative humidity less than 85%RH, and well-ventilated room, and there should be no corrosive gas around it.

Safety Precautions

Do not apply force or shock to the unit.

This may result in product damage.
To ensure good air circulation, make sure that there is no obstruction in the front, back and sides of the unit during installation. Install the unit at least 2 meters away from other electronic devices such as TVs.
Radio or static interference may otherwise occur.
When it is time to change the filter, replace it with a new filter.
Failure to do so may cause performance degradation. Please be careful not to freeze the unit.
Do not operate the device with the filter removed.
Otherwise, the cleaning effect may become ineffective. Also, this may cause malfunction.

Danger

Do not let water or any other liquid or flammable detergent enter the appliance to avoid electric shock and/or a fire hazard.
Do not clean the appliance with water or any other liquid or a (flammable) detergent to avoid electric shock and/or a fire hazard.
Unplug or disconnect the appliance from the power supply before servicing.
Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device. 4

Before Use

Installing Air Cleaning Filter

Place the unit upside down on a flat surface with the bottom facing up.
At the bottom of the unit, push the “OPEN”lever in the direction of the arrow sign.
Take out the filter inside the unit.
Remove the plastic packaging from the filter.

Before Use

After removing the plastic packaging of the filter, put the filter into the unit. (There is no specified direction for the filter.)
Insert the filter cover and each triangular mark in line with each other, and push firmly until the lever is closed.

Connecting the Power Supply

Connect the power adapter to the unit.

Product Introduction

Product Specification

The exterior design and product structure of this product are subject to change without prior notice to users in order to improve the product quality.

Product Introduction

Use the dedicated power adapter for Renpho product only.

Product Introduction

Control Panel

Pre-run is performed during initial sensor stabilization for approximately 15 seconds after starting air purifying operation.

Product Introduction

Air Quality Condition

There are four different colors of indicator LED that show the air quality according to the degree of ultra fine dust.

Note

Ultra-fine dust (PM2.5): Airborne dust with a size of 2.5μm or less
Lock/Unlock

Air Quality Condition Indicator LED

Product Introduction

Note

When the unit is not used and not operated in a while, the air quality indicator may sho as “Poor” temporarily when it operates again.
The air quality indication may differ from other instruments or other products, and may differ from the forecast by the Ministry of Environment. The values published by the Ministry of Environment measure the dust concentration by the gravimetric method and the beta ray absorption method, but the company measures the amount of dust and converts it into mass concentration, so there may be a difference from the actual dust concentration.
If different brand of air purifier products are used in the same room, the air quality may differ due to air circulation.
The air quality condition may be displayed differently depending on the . environment of use, such as around the construction site, the use of a vacuum cleaner, and blanket arrangement. In an environment where yellow dust occurs or outside air enters indoor, a spray-type humidifier may be turned on around the air purifier, or if the humidity is high, the indicator shows the air quality may show as “Poor”.

Filter Introduction

Feature

\All-in-One Care filter(R-M003-F1/R-M003-F2)
Fabric Pre-filter: Eliminate large dirt, hair, and pet hair.
H13 True HEPA Filter: Eliminate fine dust in the air as well as ultrafine dust below PM2.5.
Deodorization Activated Carbon Filter: Eliminates living odors and harmful gas.
Net Filter: Leak-proof for carbon grains.

4-Stage Filtration System

Fabric Pre-filter
H13 True HEPA Filter
Deodorization Filter
Net Filter

How to Use Filters

This product consists of four levels of filters.
If an air purifier is used without a filter installed, there is no air cleaning effect when it operates and may cause product failure.
When you purchase the unit and use it for the first time, you may smell the new filter. If you operate the unit for more than a day, the odor will disappear.
If the air purifier is used in the air environment with strong odor, the lifetime of the deodorizing filter will be shortened significantly, and in severe cases, deodorization filter may get saturated with the odor In case of excessive odor, it is recommended to ventilate to eliminate excessive odors, and use it to eliminate the remaining odors once more after ventilating the room.

Filter Replacement

When the filter replacement alert indicator [jj] turns on, you should replace the All-in-One Care filter.

The All-in-One Care filter is a consumable item. Even during the warranty period, if there is severe indoor air pollution or odor, you may have to purchase a new filter as replacement.
The filter replacement alert is turned on according to the maximum usage period and in consideration of the product operating time.

CAUTION

For filters, only use Official REN PHO replacement filter to maintain product performance. (Search for: R-M003-F1 / R-M003-F2)
Always disconnect the power plug before replacing the filter.

The replacement cycle may vary depending on the operating environment.
Clean the fabric filter every 2~4 weeks before use. For cleaning instructions, refer to the ‘How to Clean the Unit’ section.
After the filter has been working for 6 months, the life of the filter has expired, the filter reset indicator is 50% on, and the filter indicator is on.
Long press the Mode button for 3S, the filter resets, the filter reset indicator and the filter mark go out. If the filter has not expired, this operation is invalid. 13 FR

Filter Replacement

How to Replace the All-in-One Care Filter & CAUTION

CAUTION

Disconnect the power plug after pressing the [Power] button to turn it off before replacing the filter.

Lean the product about 45° (113°F) on a flat surface. On the filter cover, push the “OPEN” lever in the direction of the arrow sign to open it.
After removing the filter cover, lift the unit in an upright position to remove the filter.
CAUTION
• If you remove the filter by laying the unit on its side, remaining dust on the Fabric Pre-filter may fall on the floor.
Remove the plastic packaging from the new filter.

Filter Replacement

After removing the plastic packaging from the filter, place the unit upside down into the unit to insert a new filter
Insert the filter cover and align each triangular mark, push firmly until the lever is closed
Turn on the unit and press [Mode] button for 3 seconds. 15

At the same time as the alarm sound, the replace alert turns off, and the filter life timer is reset.
Please proceed with filter reset when you replace it with a new filter without replacement alert.

How to Clean the Unit

CAUTION

Always disconnect the power plug before cleaning the air purifier.
Do not use organic solvents (solvents, thinners, etc.). bleach, detergents containing chlorine and abrasives.
Do not soak the unit or spray water on it.

Exterior Cleaning (Cleaning cycle: every 2~4 weeks)

Clean any dust on the surface with a soft dry cloth or soft brush.
& CAUTION
• If the unit is severely polluted with dust, wipe it with a slightly damp cloth.
(Do not use abrasive cloth.)

Four Sides of Air Inlet (Cleaning cycle: every 2~4 weeks)

Wipe the four sides of the air inlet with a soft, dry cloth. Use a vacuum cleaner to remove dust from the air inlet and air outlet.

CAUTION

If the unit is severely polluted with dust, wipe it with a slightly damp cloth. Do not use abrasive cloth.)

Sensor (Cleaning cycle: every 4 weeks)

Clean the dust inlet, dust outlet, and dust sensor sensing area using a soft brush or vacuum cleaner.

CAUTION

If cleaning is not performed regularly, it may cause the performance of the dust sensor to deteriorate.
Cleaning cycles vary depending on the usage environment. Be sure to clean more often in dusty environments.

How to Clean the Unit

Fabric Pre-filter (Cleaning cycle: every 2~4 weeks) & CAUTION

Always disconnect the power plug before cleaning the filter.
You can clean the Fabric Pre-filter by removing dust on the filter.
ithe Fabric Pre-filter is not cleaned for a long time, product performance may deteriorate.
Deodorization filter and ultrafine dust collection filter cannot be reused by washing them. Please do not wash these filters with water.

Lean the product about 45°(113°F) on a flat surface. On the filter cover, push “OPEN” lever in the direction of the arrow sign to open it.
After removing the filter cover, lift the unit in an upright position to remove the filter.
• Lift up the unit to prevent dust from entering
3. Use a vacuum cleaner to remove dust.
CAUTION
Never wash the unit with water
.

How to Clean the Unit

Turn the unit upside down and put the filter back after cleaning.
Insert the filter cover and align each triangular mark in line, push firmly until the lever is closed.

Warranty (1-Year Period)

The manufacturer’s warranty is void under the following circumstances but not limited to:

Improper or inadequate maintenance or modification.
Accident, misuse, abuse, contamination, or other external causes.
The use of unspecified adapter and accessories.
Loss or damage in transit.
Damages that occurs as a result of one’s failure to follow the instructions.
This warranty does not apply to expendable or consumable parts and does not extend o any product from which the serial number has been removed.