global sources H301 3-in-1 Foldable Wireless Charger User Manual
- June 5, 2024
- global sources
Table of Contents
H301 3-in-1 Foldable Wireless Charger
User Manual
Product Description
This device is a 3-IN-1 fast wireless charger that can support power charging
for QI compatible mobile phone/iWatch/TWS Bluetooth headsets. Also, nightlight
design is special and more practical.
Foldable design make it more convenience to carry. Fast wireless charging is
available for both folded and open situations, and you just need to put the
device to be charged on the charging area. Mobile phones could be placed in
both of vertical position and horizontal positions, and you could make video
chat or watch your favorite movie as you want while charging.
Specifications
| Name | 3 in 1 Wireless Charger |
|---|---|
| Using Type | Foldable |
| Material | Plastic +Acrylic |
| Colour | Black |
| Charging Port | Type-C |
| Input Current | ≥ 9V-2A,5V-3A |
| Phone Output | 15W/10W/7.5W/5W |
| Watch Output | 2.5W |
| Headphone Output | 3W |
| Adapter | ≥9V-2A,5A-3A |
| Inch | 16014020mm |
| Compatibility | Support Qi-compatible mobile phones, Bluetooth headsets, Apple |
Watch
Product List I Wireless charger xl, charging cable xl, manual xl
Operation Steps
-
Please firstly power on the device by our provided power cable.
-
When charging devices such as mobile phones, iWatch, or Bluetooth headsets, just place these devices on the charging area and they will be charged only after 0.1 seconds. When the devices are fully charged or you want to terminate charging, just take them away from the charging area.
Wireless charging for mobile phones, ‘Watch, and TWS Bluetooth th headsets -
When the device is open, the mobile phone could be charged in the horizontal or vertical direction.
precautions
- it is forbidden to immerse the device in water to avoid a short circuit of the internal circuit.
- It is forbidden to disassemble or beat the device by yourself to avoid damaging the device.
- Please place the device away from flammable and explosive liquids, gases, or explosives.
- Do not place magnetic cards, magnetic stripe media, and precision machinery too close to the device.
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.