Srhythm T2 Wireless Audio Adapter User Manual

Srhythm T2 Wireless Audio Adapter

Packing Accessories

• Wireless Audio Adapter:          1PCS
• 3.5MM audio cable:                 1PCS
• Neutral Instruction Manual:     1PCS

Technical index

• Wireless profile: EDR, A2DP, HSP, AVRCP
• Working range: open area up to 10 meters without any obstacles
• Product size: 65.9mm (length) x 47.9mm (width) x 13.3mm (height)
•  This unit comes with a battery, which can be played continuously for 6 hours after being fully charged

Instructions: Interface schematic diagram

Functional operation:

The side toggle switch for starting the product can select the receiving or transmitting mode, red means The indicator light flashes quickly for the transmit mode, and the blue indicator light flashes rapidly for the receive mode.

Pairing steps

• A: Launch mode:
  •  Press and hold M/O to turn on the machine, and set the side toggle switch to TX to enter the transmission mode.The red light flashes to indicate ready to pair (requires a Wireless Speaker or headset);
  •  Insert the 3.5MM audio cable into the 3.5mm audio port on the device, and the audio cable Plug one end into a computer, TV, projector, mobile phone, tablet, MP3, CD player, etc.The audio output interface of the device (such as the headphone output interface of the device);
  •  Turn on the audio receiving device (such as a wireless head- phones, wireless speakers, etc.) to the pairing state,The pairing is successful, the red indicator light is always on;
  •  When the device is in the transmission mode, two Wireless speakers or Wireless headset can be connected at the same time connect a wireless speaker or wireless headset, one red light is always on, two at the same time,
  • Both lights are always on when connecting a wireless speaker or wireless headset.
• B: Receive mode:
  •  Press and hold M/© to turn on the device, and then turn the side toggle switch to RX to enter the wireless receiving mode;
  •  When using this device as a receiver for the first time, you need to connect your mobile phone to the device wireless Pair, connect the device to the speaker or car stere0 system with a 3.5mm audio cable;
  •  After the phone and device are successfully paired, the indicator light will continue to be blue, and now you can play music wirelessly;
  •  In the music playback mode, when there is an incoming call, the machine will automatically switch to the phone mode
  •  When there is an incoming call, you can use this machine to answer the call, this machine has a call function;
  •  Your mobile phone is paired successfully for the first time, and it will automatically reconnect to your mobile phone the next time you turn it on.

Note :

• Different wireless devices (such as wireless headsets) will have different search connections depending on the solution and protocol used.
• lf the pairing connection fails or cannot be connected for a long time, you can shut down and re-pair the connection once.

Troubleshooting

• When you encounter the following problems, you can try the following solutions, if there is still a problem after processing?  Please contact your local dealer and do not start the repair yourself, so as not to cause unnecessary trouble!
•  Does the wireless audio adapter not work? Please check if the product has electricity Whether it is normal, plug in the power cord and try again.
•  No sound output? Please check if the 3.5MM audio cable is connected correctly?
•  If the wireless device (such as a wireless headset) is not connected, the wireless receiver can be close to some distance, or the device can be powered off and restarted once.
•  Due to the different wireless receiver chip solutions and transmission protocols, there may be problems that cannot be paired We are constantly striving for optimization v

Launch mode display: Receive mode display:

FCC Caution

Any Changes or modifications not expressly approved by the  party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

•  This device may not cause harmful interference, and
•  this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part  15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and  can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not ocour in a particular installation. If this equipment does cause harmful interterence  to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with a minimum distance 20cm between the radiatorë your body. ISEDC warning Operation is subject to the following two conditions:

• this device may not cause interference, and
•  this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>