Shenzhen Woka Technology 2A6XR Wireless Charger User Guide
- June 5, 2024
- Shenzhen Woka Technology
Table of Contents
Shenzhen Woka Technology 2A6XR Wireless Charger
Feature of Product
- Qi Standard Wireless Charger: 5W/7.5W/10W/15W charging mode.compatible for Android & iPhone charge.
- 3 in 1 Rotatable Charger Dock: 3 plug type for iPhone, Android Micro USB & Type-C phone.
- Bluetooth Earphone Charger Dock. Smartwatch charging stant.
- Suitable Indoor Use: Home,hotel,office,restaurant, bar.etc.
Specifications
Item Model | 5 IN 1 |
---|---|
Input Voltage/Current | 9V 2A/3A |
Output Voltage/Current of Charger Dock | DC5V-1.5A Max. |
Power of Wireless Charger | 5W/7.5W/10W/15W Max. |
Bluetooth Headphone Output | 3WMax. |
Material | ABS+PC |
USB Cable Length | 110cm |
Product Sizes | L230W90H57mm |
Net Weight: | 205g |
Gross Weight, | 265g |
Colour: | White Black Silver Gray Rose-Gold |
Product Schematic Diagram
- DUSB Cable
- Micro 5Pin Plug
- Type-C Plug
- For iPhone Plug
- Wireless Charger
- Bluetooth Earphone Charger Dock
- Smart watch charging stand.
- USB interface
How to Use
-
Connect BXD-07 A to DC 5V output USB charger by it’s USB cable
-
CD If connect it to regular DC 5V USB charger, the wireless charging mode of BXD-07A is 5W regular charge;
-
If connect it to QC 3.0 Quick charger, the wireless charging mode of BXD-07Ais 15W fast charge.
-
Dafter connecting to the power supply, you could choose dock plug charge or wireless charge
-
CD Dock Plug Charge: Plug and charge optional,
plugs for iPhone,Android micro or type-C mobile phone, compatible for more than 99% of smartphones. -
Dock plug charging do not support quick charge;
-
Wireless Charge: If your mobile phone built in wireless charge function, you could put it on BXD-07A and charge directly; If your mobile phone do not built in wireless charge function, you need to connect your phone to a receiving coil and then charge.
-
Bluetooth earphone Charger Dock: Directly plug in your apple BlueTooth headset is ok
-
Smartwatch charging stand: it can charge for the smart watch, when you mount watch charger cable.
Safety tips
Please read the instructions carefully before using the product, so that it can be used correctly and stored properly.
- Do not disassemble the product or change the actual use of the product without authorization.
- Keep away from water or other liquids which may lead to short circuits when using the product.
- Please use the product in the temperature range of- 10’C 45 C. Do not use the product near the fire source or under sunlight.
- For safety, please place the product away from children.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>