NEWDERY N2002 Power Bank User Manual
- June 28, 2024
- NEWDERY
Table of Contents
NEWDERY N2002 Power Bank
Product Diagram
Product Description
Thank you for choosing our power bank, before you use this product, please read this manual carefully and keep it properly
Product Parameters
- Name: Power Bank
- Model: N2002
- Battery type: Polymer lithium battery
- Battery energy: 20000mAh/77Wh
- Type-C input: 5V-3A, 9V-2A, 12V-1.5A
- Type-C output: 5V-3A, 9V-2.22A, 12V-1.67A
- USB output: 5V-3A, 9V-2A, 12V-1.5A
- Lightning Cable: 5V-2.4A
- Type C Cable: 5V-3A, 9V-2.22A, 12V-1.67A
- Total Output: 5V-3A
- Watch magnetic output: 3W Max
- Material: PC+ABS
- Product size: 131.56 X 71.00 X 34.55mm
- Product weight: approx. 360g
Packing List
- Power bank x1
- User Manual x1
- Charging cable x1
Instructions For Use
-
For the first use, fully charge this product.
-
Display description: The digital tube displays the current battery level, and there is a fast charging symbol (Green lightning) when fast charging.
-
Key Description: Click the key to check the power and turn on the output, double-click to turn off the power. When there is no load, the digital tube will turn off after 30$3 seconds to enter standby mode.
-
There is a conversion efficiency in the power bank, so the battery capacity of the
power bank is not equal to the rechargeable capacity. -
When charging this product or using this product to charge other devices, please choose the appropriate charger and cable
-
During the charging of this product, make sure that someone is present, and unplug it when you go out or leave for a long time.
-
After this product is fully charged, or after this product is fully charged to other devices, please unplug the connecting cable in time to avoid loss caused by being connected for a long time.
-
If there is no battery indication after pressing the button, this product may be in a protected state, and it can be connected to an external charger to try to recover.
-
When not using this product for a long time, please keep the battery level of this product in the range of about 25%-50%, and store it in a cool, dry environment. Avoid storing this product for a long time when it is fully charged or uncharged to prolong battery life.
-
If the consumer violates the warning of the product instruction manual, the personal and property damage caused by the improper use of this product will bear all the consequences, and the company will not bear any legal responsibility.
Safety Guidance
- This product is not a toy, please place it out of reach of children, and it is forbidden for children to use or play with it to avoid accidents
- Please be sure to choose a charger that meets local safety standards (such as China’s 3C certification standards) to charge this product to prevent electric shock or battery damage.
- Do not put heavy pressure or knock on this product and avoid serious drops or strong vibrations of this product, if these situations occur, or if liquid seeps/splashes into the inside of this product, it may cause damage or short circuit to the battery and circuit, please stop using it immediately and dispose of it properly
- If this product is swollen, deformed, leaking, or the capacity is significantly reduced, please stop using it immediately and dispose of it properly.
- Do not charge or discharge this product in a place that may affect its heat dissipation, such as in a pocket of clothes and pants, in an airtight bag, on a bed, on a sofa, or other places that may affect its heat dissipation. And confirm that this product is not covered by clothing, pillows, bedding or other sundries, etc., and do not stack this product and other devices such as mobile phones when charging other devices such as mobile phones for a long time to ensure good heat dissipation of mobile phones and other devices.
- It is strictly forbidden to disassemble, squeeze, puncture, short-circuit this product or throw it into water, fire (including near stoves, heating and other heat sources) or expose it to temperatures higher than 60°C (140°F).
- When the weather is hot, do not leave this product outdoors in an unmanned car or other places exposed to the sun.
- This product contains ionic polymer batteries, and it is strictly forbidden to disassemble the product shell without permission. Avoid causing battery breakage or other hazards.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 0cm centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.