Shenzhen Sungi Technology S8 Vertical Mouse User Manual

June 5, 2024
Shenzhen Sungi Technology

Technology S8 Vertical Mouse
User Manual

OPTICAL VERTICAL MOUSE

Healthy Mouse HOMOO S8
This mouse is full of vitality, and innovation, and has many health benefits. By changing the way you use your wrist and arms, you will effectively reduce pain and discomfort. Add rubber oil coating to prevent sweaty fingers from sliding. From the office to gaming, using the optical vertical mouse is comfortable and healthy.
A. lithium battery version

B. Dry electric version

C. The cable design

Connecting USB Receiver
Take out the receiver from inside the box and insert the USB receiver into the USB port on your computer. If using it for the first time, please toggle the power switch on the bottom of the mouse to the ‘ON” position, and the mouse and USB receiver will automatically connect.
Intelligent sleep and waking up
The mouse has automatic wake-up and sleeps functions. If it is not in use for a period of time, the mouse automatically enters a dormant state. At any time, you can press any button on the mouse to exit the dormant state. The mouse lights will continue to flash and keep working with the receiver.
Turning off the mouse
When the mouse does not need to be used, toggle the power switch to the ‘OFF” position. You can leave the USB receiver in the computer or put it back into the slot under the mouse for safekeeping.
Rechargeable batteries (using 5 c)
The equipment uses a 5 c rechargeable lithium battery. Please use the matching supply line. The product can be used while charging but will extend the charging time. When the battery is low, the power will automatically stop to avoid the danger of excessive discharge.
Charge indicator: normally on for charging status, lamp light will stay on. If it is flashing, there may be poor contact, please check the connection.
A full charge can take 3-4 hours and will last 30 to 60 days. It can be recharged 300 times. When charging, the left side LED shines blue; Full charge, the LED turns off.
Notes: This product has 3 configurations, A .B.0 that you can choose from.
Configure A: lithium battery version, this version has a built-in rechargeable lithium battery, with an additional USB charging cable.
Configure B: Dry electric wireless models, loaded with 2 AAA batteries, battery self-configuring
Configuration C: wired modes, a USB cable to connect the equipment power supply

Appendix Technical parameters Specification

Measurements (LWI-1): 105 x 73 x 60(mm)
Weight (grams): 123g / 147.5g / 135.5g
Operational range: > 15m
Transmit power: +5db max
Operation voltage: 3.7v
Operation current: < 5mA
Charging current: <300mA Sleep current: < 1 uA
Sensitivity: 3 dpi
modes: DPI 800-1200-1600 Adjustable

Computer system requirements:

  • Windows 2000
  • Windows XP
  • Windows Vista, Windows CE, Windows 7, Windows10 Linux Android

Maintenance

Do not attempt to remove the device or replace lithium-ion batteries, doing so will void the warranty and may cause it to short circuit; fire, and explosion danger.
The battery will lose its charge if stored for a long period of time without usage.
Use the specified charger. Disconnect the device after the battery has been fully charged. Overcharging the battery will shorten the life span of the battery.
Use only a damp cloth with mild soap to clean the device. Solvents and other cleaning agents may cause damage to the device.
Don’t expose the device to a very hot or very cold environment. Extreme temperature can make electricity shorten its lifespan.

Troubleshooting

Below are some basic troubleshooting scenarios for the device. Please contact support from the place of purchase if you’re unable to resolve any issues with the device.

Malfunction The possible reasons The solution
The mouse does not respond 1. The battery is low

2. Power switch is turned off
3. The device has installed a driver| 1. Solution A: charge for at least 15 minutes
Solution B: if using for the first time propose a full charge before use
2. Check to see if the switch has been turned to the “ON” position
3. Check at the bottom of the light is bright
unable to connect to the USB receiver| 1. The receiver was not inserted correctly
2. Low battery shut down automatically| 1. Pull out the receiver and reinsert it into the USB port
2. Use the mouse on a full charge again
the mouse pointer is irregular or slow to respond| 1. Equipment may not be the optimal
receiving range
2. Low voltage
3. Dust and oil on the laser at the bottom
4. The mouse DPI is too low| 1. Move the mouse closer to the receiver
2. Please charge or change batteries
3. Use a wet cloth clean the bottom of the laser
4. DPI 800-1200-1600 Adjustable
The product will not charge| 1. Low battery
2.Poor connection
3. Charging line damaged| 1. Please contact the local dealer to replace
2. Check whether the product is connected to the charger safely.
3. Replace the new charging line

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Does the product have a 2.4 GHz wireless lithium battery and the cable version is optional?
*Does packing list (mouse, receiver, charging line, manual) 1**

Documents / Resources

| Shenzhen Sungi Technology S8 Vertical Mouse [pdf] User Manual
S8, 2ABDB-S8, 2ABDBS8, S8 Vertical Mouse, S8, Vertical Mouse
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals