Prextex TY0068 2 in 1 Cartoon Car Set Instruction Manual

August 26, 2024
Prextex

Prextex TY0068 2 in 1 Cartoon Car Set

Product Information

Specifications

  • Compliance: Part 15 of FCC Rules
  • Conditions: Must not cause harmful interference, must accept any received interference
  • Approval: Changes/modifications not approved may void user’s authority

Product Usage Instructions

Setting Up the Device

  1. Unbox the device and ensure all components are included.
  2. Plug in the device to a power source using the provided adapter.
  3. Turn on the device by pressing the power button.

Operating the Device

  1. Familiarize yourself with the device’s controls and interface.
  2. Follow the user manual for specific functions and features.
  3. Use the device in accordance with the provided guidelines.

Maintaining the Device

  1. Keep the device clean and free from dust or debris.
  2. Avoid exposing the device to extreme temperatures or moisture.
  3. Regularly check for software updates and install them as necessary.

Frequently Asked Questions

  1. Q: What should I do if the device causes interference?
    A: If interference is observed, try relocating the device or contacting customer support for assistance.

  2. Q: Can I make modifications to the device?
    A: No, any changes or modifications not approved can void your authority to operate the equipment.

PRODUCT INCLUDES

Prextex-TY0068-2-in-1-Cartoon-Car-Set-\(1\)

  • Includes 2 vehicles: 1 truck and 1 tractor, along with 2 removable action figures and 2 remote controls.

BATTERY INSTALLATION

Prextex-TY0068-2-in-1-Cartoon-Car-Set-\(2\)

  • Vehides require 3AA batteries and remotes require 2AA batteries. batteries not included.

OPERATING THE CAR

Prextex-TY0068-2-in-1-Cartoon-Car-Set-\(3\)

  • Prextex cartoon vehicles are the perfect introduction to radio controlled toys for young children and toddlers
  • Each vehicle has a different frequency so both vehicies can be played with at once.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesirable operation.

Distributed by  Whele LLC, Wilmington, DE 19801, USA
Prextex and Perch and al related trademarks and logos are trademarks of Whele, LLC and its affiliates.© 2023. Al rights reserved
Email us at cs+prextex@Perchhq.com

Whele Acquisttion Co, 2 c/o Global E-commerce Experts
UK Address UK adresse: Unit 5, Mountpark, Wide Lane, Southampton S018 2FA
NL Address NL adresse: Rijnlanderweg 766 Unn H, 2132 NM Hoofddorp, Netheiands

Made in Shantou, China

Federal Communications Commission

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement
The device has been evaluatec to meel general RF exposure requirement. The device can be used in porlable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals