Vibration & Door + Window Sensor User Guide
- June 6, 2024
- Vibration
Table of Contents
Vibration & Door + Window Sensor
The combined vibration & door/window sensor can be installed on doors and windows. The sensor transmits a signal to the Noah hub when the door/window is opened and when vibration e.g. smashed window is detected.
Features
- Magnet
- Tamper switch
- Battery compartment
- Vibration sensitivity
Tamper Alarm
If an intruder attempts to remove or damage the sensor, a tamper alarm is triggered and the user is notified immediately.
Vibration Sensitivity Adjustment
The sensor has two sensitivity settings. You can change the sensitivity using a small screwdriver
- L: Low sensitivity for normal home environment
- H: High sensitivity for sound-proof rooms
Installation
- Open the back cover of the sensor, check the battery is fitted properly.
- Ensure the area that the sensor will be located is clean and free from dust and moisture. Avoid mounting the sensors in areas with lots of metal or electrical wiring.
- Use the adhesive strip to carefully mount the sensor on to the door/window frame.
- Mount the magnet on to the door/window no more than 1cm from the sensor.
Specification
- Power supply: DC 3V/2pcs AAAA battery
- Standby current: <30ɥA
- Alarm current: <35mA
- Working temperature: -20°C – 55°C
- Humidity: Up to 40% (non-condensing)
- Digital processing unit: 12/nits MHz
- Detector dimension (L/W/H): 21 x 90 x 18 mm
- Magnet dimension (L/W/H): 10 x 45 x 11 mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>