intelligent home TECHNOLOGY CENTER HS32119CP01 Power Series Neo Kit User Guide
- June 5, 2024
- intelligent home TECHNOLOGY CENTER
Table of Contents
User Guide
DSC Power Series NEO
Arming The Alarm System
Away Arming
AWAY
To arm your system, press and hold the “AWAY” function button for 3
seconds. Your alarm will start the exit delay timer. In some cases, you will
be prompted to enter your user code to confirm.
Stay Arming
STAY
To arm the system in stay mode, press and hold the “STAY” function button
for 3 seconds. Your alarm will start the exit delay timer. In some cases,
you will be prompted to enter your User code to confirm. Once armed, do not
leave the premises without disarming the system.
Night Mode
To arm the system in night mode (if enabled), first arm your home in stay mode. Once complete, press the * key then 1 key. This will change the system from stay mode to night mode which enables all programmed sensors to arm in away mode, and only allow programmed sensors in certain areas to be bypassed.
Disarming the Alarm System
Disarming
To disarm your home Alarm system when Armed in any state, simply enter your
User Code.
Incorrect Code
If you enter your code incorrectly, the keypad will make a 3-second error tone
and display an on-screen error. Simply enter your User code again to disarm.
Simple Functions 1
Turn Chime Mode On/Off
Press * then 4, or press and hold the “BELL” function key to turn the chime on
or off.
Silence Keypad Beeping
Press *, 2 then #. If the keypad continues to beep, you must continue the
sequence until you are able to contact Intelligent Home for assistance.
Trouble Condition
When there is an error with the alarm system, press *, 2 to display a description of the current error.
Simple Functions 2
Bypass a Zone
Press , 1 then use the right arrow to scroll to the zone you want to bypass and press and the letter “B” will appear in the bottom right corner, press # to exit, then arm your system.
Clear Bypassed Zone/s
Press * then 1. Press 0, 0 to clear.
Set Time & Date
Press , 6. Enter your user code, use the right arrow to scroll to “TIME &
DATE” then press enter (24hr) HH: MM then date in MM-DD-YY format. Once
complete press # to exit settings.
Change Current or Enter Additional User Codes
Press , 5, and enter your master user code. User 1 will now appear, press to enter, and (Access Code) will appear. Press * again to enter and edit this user code
OR scroll across using the right arrow to create or edit another user, AFTER User 1 appears on screen i.e select User 2,3,4. Press to enter, and (Access Code) will appear. Press again to enter and edit this user code. Once complete press #, #, # to exit.
Simple Functions 3
Change Screen Brightness
Press , 6. Enter your user code, and use the left arrow to scroll back to
brightness by pressing the arrow key 5 times. Press to enter the
“BRIGHTNESS” section, then use the left or right arrow to change brightness up
or down.
Change Keypad Tone – Buzzer Louder/Quieter
Press , 6. Enter your user code, and use the left arrow to scroll back to
“BUZZER CONTROL” by pressing the arrow key 3 times. Press to enter the
“BUZZER CONTROL” section, then use the left or right arrow to change the sound
up or down.
Panic Button
To set the alarm off instantly, press and hold BOTH the “POLICE” badge
function buttons on the left side of the keypad.
To disarm the alarm, enter your alarm code.
Alarm Servicing
We recommend that you have your alarm system checked and serviced regularly,
either once per year or at least every third year, depending on the size of
the system in your home.
You should also change your alarm backup battery every 3-5 years to maintain a
functioning, efficient alarm system.
To book an Alarm Service, please call the Intelligent Home service department
for a booking on 6363 8744.
Hours:
Monday | 8 am–4 pm |
---|---|
Tuesday | 8 am–4 pm |
Wednesday | 8 am–4 pm |
Thursday | 8 am–4 pm |
Friday | 8 am–4 pm |
Saturday | Closed |
Sunday | Closed |
Address: | 26 Walters Dr, Osborne Park WA 6017 |
Phone: | (08) 6363 8744 |
Web: | www.intelligenthome.com.au |
Alarm Monitoring Control Centres
For all GPRS Diallers and alarm.com systems,
Bureau Name: | Sapio |
---|---|
Phone Number: | 1300 30 30 17 |
Web: | www.sapio.com.au |
Alarm monitoring options start from $35 a month.
Contact us on 6363 8744 for more information.
Keypad Layout
Notes
26 Walters Dr. Osborne Park WA 6017
T (08) 6363 8744
W intelligenthome.com.au
References
- Alarm.com | Best Smart Security Alarm & Monitoring Systems
- Intelligent Home Technology Centre Perth
- Intelligent Home Technology Centre Perth
- Sapio - Human Powered Security
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>