TENLOG TL-D6 IDEX 3D Printer User Manual

TENLOG TL-D6 IDEX 3D Printer

Parts List

1. Printer Host

2. Z/X Gantry Assembly

3. Dual Extruder & Nozzle Kits

4. Z-axis Cable-Stayed kit

5. Tool Box

6. Allen Wrench

7. 5x M5*25 Screw

8. 5x M5 Spring Washer

9. 9x M3*16 Screw

10. 5x M4 T-nut

11. 5x M4*6 Screw

12. 2x Filament Holder

13. 2x 15 Pins VGA Cable

14. 2× Filament Runout Sensor

15. Power Cable

16. 1.5m USB Cable

17. Card Reader

18. Open End Spanner

19. Screwdriver

20. Nozzle Cleaning Kit

21. Diagonal Pliers

22. Blade

23. 1x M5*30 Screw

Safety Alert

1.  Minors are not allowed to use alone
2.   Do not plug or unplug under power
3.  Double check voltage before first use
4.  Do not touch hot nozzle and hot bed
5. A grounded wire is required
6. Do not touch any moving part

How to Assemble

1. Assemble Z/X Gantry Assembly to the Printer Host

2. Assemble Dual Extruder & Nozzle Kits

3. Assemble the Filament Holder

4. Assemble Z-axis Cable-Stayed Kit
   

5. Wiring
   

6. Enable Filament Runout Detection
   

How To Use Touch Screen

• Click on Tool button, you can get
  

  • Semi-automatic Leveling
  • Preheat PLA ABS
  • Filaments Reload
  • Printing from any Height etc.

• Click on Dual Material button, you can switch the print mode:

• Click on Setting button, you can configure the printer:
  

  • X Y Z E Steps: The values of Steps per millimeter of each
  • X2 Y2 22: Nozzle Offset of Nozzle 2 Relative to Nozzle 7
  • Fan2 Temp: Set the startup temperature of Nozzle Cooling Fan
  • Fan2 Speed: Speed of Nozzle Cooling Fan

How to Use

1. How to Level
   

2. How to Set Nozzle Offset
   

3. How to Use
   

Cura Interface Overview

1. Open file. Opens a 3D file.
2. Printer selection panel. Displays the selected printer.
3. Configuration panel. Contains the material and print core setup.
4. Stages. The prepare. Preview and monitor stage. Each stage is arranged to efficiently go through each 3D printing step.
5. Print settings panel. Contains all slice strategy parameters.
6. Marketplace. Contains plugins and material packages.
7. Ultimaker account. Allows access to cloud functionality, Marketplace plugins and print profiles, backups and more.
8. Action panel. Contains an action button dependent on the current stage.
9. Print over network. Save to removable disk or save to file.
10. Preview. Proceeds to the next stage, the preview stage.
11. Camera position tool. Easily positions the camera to default show default viewing angles.
12. Model information. Contains the 3D model name and dimensions of all
13. printable models on the build plate.
14. Adjustment Tools. This allows you to easily position, scale, and rotate models on the build plate in the most efficient way.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>