DURONIC HS90 2-in-1 Handheld Steam Iron User Manual

HS90 2-in-1 Handheld Steam Iron
User Manual

PLEASE READ ALL THE INSTRUCTIONS BEFORE USE

duronic.com| duronic| Idduronicmedia| Duronic| Idduronicmedia

Features and Specifications

MODEL| POWER| VOLTAGE
RATING| WATER TANK
CAPACITY
---|---|---|---
HS90| 1000-1190W| 220-240V – 50/60Hz| 90m1

• 2 steam functions
• Water tank capacity: 90ml
• Temperature range: 90-180°c
• Soleplate size: 17.7×7.5cm
• Power light indicator: Blue
• Size: L17.7 x W7.5 x H10 cm
• Weight: 871g
• Power cable length: 200cm

Components

7. Main body

Safety Instructions

PLEASE READ THIS MANUAL CAREFULLY AND RETAIN IT FOR FUTURE REFERENCE

• This appliance is for light or occasional indoor/household use only. This iron is not intended for professional laundry services.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be closely supervised at all times to ensure that they do not play with the appliance.

• Do not operate this appliance if the power cable or plug is damaged.
  If either is damaged return it to Duronic for service or repair by a professional technician.

• Please ensure the mains power supply is 220-240V ~ 50/60Hz.

• Do not use this appliance on an extension lead or multi-way plug adapter.

• Do not yank the power cable to remove it from the plug socket. Always grasp the plug and pull it out to disconnect it.

• Never try to replace the parts or repair the appliance by yourself.

• To reduce the risk of electric shock, never operate this product with wet hands, spill liquid on it, or submerge it in water or any other liquid.

• Do not place the iron on or near a hot gas or on a heated oven.

• Do not let the power cable hang over the edge of a table or counter or touch a hot surface.

• Pay close attention to the iron whilst in use. The iron must not be left unattended while it is connected to the main socket.

• Ensure that the iron is switched off and unplugged from the electrical mains socket and fully cooled down before storing away.

• Do not use any attachments which are not listed in this manual.

• Always hold the iron by the handle. Keep the hot soleplate away from body parts and heat-sensitive objects.

• Do not turn the iron upside down; there may be hot water in the water tank.

• Do not leave water in the water tank when the iron is not in use – this can corrode and damage the soleplate.

• Keep the iron well away from surfaces and objects that can be damaged by heat.

• Ensure there is adequate space to operate the iron.

• When not ironing, place the iron down onto the iron base, on a level surface.

• When ironing garments, use this iron only with a purpose-built ironing board, on a flat even surface.

• Observe all of the ironing instructions and ironing temperature dot settings given by the garment manufacturer. These guidelines are normally on the label/s inside the garment.

• Always ensure the water filling does not exceed the MAX mark.

• Always switch off and unplug the iron when refilling the water tank.

• Do not fill the water tank with hot water or corrosive cleaning agents which could cause damage to the iron.

• Do not iron buttons or fasteners. This could damage the iron soleplate.

• During operation do not use the iron when the light is flashing, this means the iron is heating up. When the light stays constantly lit up the iron has reached the correct temperature and you can use the iron.

• Do not iron directly onto synthetic or silk fabric – instead iron the fabric inside out or with the synthetic fabric covered by another material to protect it.

• If the steam iron falls over, check it for visible signs of damage or leakage.
  If any is found, stop using the iron immediately.

• Do not put the iron in the storage bag or store it away whilst hot. Wait for it to cool before storing it away.

Ironing Temperatures

How to Use
FIRST USE
Fill the water tank using the jug provided.
Plugin and switch on the iron and allow it to heat up for 5 minutes before using it the first time. Then switch the iron off, unplug the cable and empty the water from the iron.

FILLING THE IRON
Only fill the iron with water if you intend to use the steam function. For dry ironing, you do not need to fill the tank with water.

1. Make sure the iron is turned off and unplugged from the main socket.
2. Fill the water jug with fresh water from the tap. If you live in a hard water area, it is advisable to use distilled water. Avoid using water-containing softeners, perfumes, or additives.
3. Open the water tank cap on the top of the iron and slowly pour the water in from the jug.
4. Close the cap.

IRONING FUNCTIONS
There are three different functions the iron to choose from. These can be selected by pressing the steam button.

1. Press the steam button once for less steam
2. Press the steam button twice for more steam
3. Press the steam button three times for dry iron mode
4. If you press the steam button for a fourth time it will return to the less steam mode.

Tip: If you wish to use the more steam mode, it is recommended the ironwork in the less steam mode for a couple of minutes first to build temperature and avoid water spraying due to insufficient temperature. Then switch to more steam mode.

Using the Iron

1. Place the iron onto the heatproof stand or on the designated heatproof iron-resting surface on your ironing board.

2. Press the handle rotation button and turn the handle until it locks in place.

3. If choosing to use the steam function, fill up the iron with water using the jug provided.

4. Plugin the power cable into the main socket and switch it on. This will put the iron into standby mode and the power button will flash orange.

5. Press the power button to turn on the iron. The button will flash blue and continue to do so while the iron is heating up.

6. Once it has finished heating up and reached the optimal temperature, the power button light will stop flashing and remain constantly blue.

7. If you wish to use the iron Dry Mode without steam, it is now ready to use.

8. If you wish to use the iron with the Steam Mode, select the level of steam you need:
   • Press the steam button once for less steam (this will light up orange)
   • Press the steam button twice for more steam (this will light up blue)
   Note: You can return to Dry Iron Mode by pressing the steam button for the third time.

9. Iron your garment as you normally would on an ironing board.

10. If you are using the Steam Mode and notice that the water level goes too low and you haven’t finished ironing, switch off and unplug the iron. Refill it using the water jug.  Then follow steps 5-8 again to continue ironing.

11. If you need to put the iron down to handle the fabric, place the iron on the designated heatproof iron-resting surface on your ironing board or the heatproof stand provided.

12. When you have finished ironing, press the power button to turn it off. The power button will flash orange again to let you know that it’s on standby and switched on still at the plug.

13. Switch it off at the plug and unplug it from the wall socket.

14. Allow the iron to cool down completely. Once cool, empty the water tank.

15. Press the handle rotation button and turn the handle into the closed position.

16. Store away using the storage bag provided.

Steam Function

The steam function is mainly used for thick materials or fabrics with stubborn creases.
If you want to use the steam function, you will need to select the appropriate setting as illustrated.
Fill the tank with full water and turn on the iron.
Select a steam function and hold the iron horizontally for a few seconds to allow the steam to flow through and clean the steam vents.
Place the iron onto the fabric and you will see the steam start to penetrate the fabric as you continue to iron. ![DURONIC HS90 2 in 1 Handheld Steam Iron

• figure 5](https://manuals.plus/wp-content/uploads/2022/05/DURONIC- HS90-2-in-1-Handheld-Steam-Iron-figure-5-550x202.jpg)

Do not use the iron at the angles shown below as the pump will not be able to sufficiently pump water through the iron to produce steam.

Ironing Tips

• For heat-sensitive fabric, cover the clothing with a piece of cotton fabric to avoid damage.

•  If you are unsure about how this iron will work on a particular fabric, test the iron on a small discrete part of the fabric first.

• Use an ironing board – using any other type of board might damage the clothing, the board, or the iron.

• The soleplate has a high temperature of up to 180 degrees when working.
  Therefore, please check the fabric to ensure it will be able to withstand this temperature. If you are not sure, try ironing a small discrete part of the fabric first to test.

• Do not hold the iron in the same position on the fabric for a long time as this may burn or damage the clothes.

• If the iron is too hot, it might leave yellow traces on your clothing. If this happens, humidify the stains with oxidized water, then rinse and dry.

• When ironing black or dark-colored clothing, turn them inside out first before ironing. This will avoid leaving trace marks on the fabric.

Cleaning & Maintenance

If you need to clean your iron, unplug it and allow it to cool completely.
Using a damp well-wrung cloth wipe the soleplate and other parts.
Then use a dry cloth to dry off any dampness.
When not in use, store the iron in the bag provided.

Troubleshooting

The thermostat is damaged.
PCB malfunction.
Soleplate heats normally, the light
indicator does not illuminate.| The light indicator is damaged.| Contact Duronic for advice.
Too little steam| Voltage is below the normal level.| Ensure that the plug is not plugged into an extension lead or plug adapter.
Water sprays| When the iron is warming up it lets a small amount of water spray| This is normal. It disappears after a minute or so.
The boiler doesn’t work.| Contact Duronic for advice.
Water leakage| | Contact Duronic for advice.

Warranty

1 Year Guarantee from Shine-Mart Ltd, Trademark owners of Duronic Products.
NOTE: THESE STATEMENTS DO NOT AFFECT YOUR STATUTORY RIGHTS AS A CONSUMER
This product has been manufactured under the strictest of quality control procedures and using the highest quality of materials, to ensure excellent performance and reliability.  t will give very good and long-lasting service provided it is properly used and maintained. The product is guaranteed for 1 year from the date of original purchase. If any defect arises due to faulty materials or poor workmanship, the faulty product must be returned to the original place of purchase. Refund or replacement is at the discretion of that company.
Duronic Products are offered with a 1-year guarantee under the following conditions:

1. The product must be returned to the retailer with original proof of purchase.
2. The product must be installed and used in accordance with the instructions contained in this operating manual.
3. It must be used only for domestic purposes.
4. It does not cover wear and tear, malicious damage, misuse, neglect, inexpert repairs or consumable parts.
5. Shine-Mart Ltd has no responsibilities for accidental or consequential loss or damage.
6. Shine-Mart Ltd is not liable to carry out any type of servicing work, under the guarantee
7. Valid in the UK only

| This product is fitted with a CE:1363 plug and fuse
Imported by Shine-Mart Ltd, RM3 8SB|
---|---|---

Information on waste Disposal for Consumers of Electrical & Electronic Equipment.
This mark on a product and/or accompanying documents indicates that when it is to be disposed of, it must be treated as Waste Electrical & Electronic Equipment, (WEEE).
Any WEEE marked products must not be mixed with general household waste but kept separate for the treatment, recovery, and recycling of the materials used.
For proper treatment, recovery and recycling; please take all WEEE marked waste to your Local Authority Civic waste site, where it will be accepted free of charge.
If customers dispose of Waste Electrical & Electronic Equipment correctly, they will be helping to save valuable resources and preventing any potential negative effects upon human health and the environment, of any hazardous materials that the waste may contain.

Follow Us

duronic.com| duronic| Idduronicmedia| Duronic| Idduronicmedia

Documents / Resources

| DURONIC HS90 2-in-1 Handheld Steam Iron [pdf] User Manual
HS90, 2-in-1 Handheld Steam Iron, HS90 2-in-1 Handheld Steam Iron
---|---

References

• Welcome to Duronic | The Global Brand of Office and Household Products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>