Cresdo HS-1035 Hand Truck User Manual
- June 17, 2024
- Cresdo
Table of Contents
Cresdo HS-1035 Hand Truck
Product Information
Specifications
- Model: HS-1035
- Screw Size: M8x55
- Number of Screws: 4
- Number of Washers: 2
- Number of Wheels: 1
- Handle Type: Insert handle
- Recommended Air Pressure: 30 PSI
Assembly Instructions
- Read the instructions thoroughly before proceeding.
- Tighten all parts by hand. Do not use a power tool.
- Do not overload the product for your safety.
- For the pneumatic wheel, check the air pressure in the tires and maintain it at 30 PSI.
- Before inserting the handle, insert the handle and locking screw.
- Lock the connection on the upper first hole on the truck body.
- To assemble the axle and wheel:
- Insert the first washer into the axle.
- Insert the wheel.
- Insert the second washer.
- Insert the pin into the axle.
- Bend the cotter pin.
FAQ
Q: Can I use a power tool to tighten the parts?
A: No, it is recommended to tighten all parts by hand and avoid using a
power tool.
Q: What is the recommended air pressure for the pneumatic wheel?
A: The recommended air pressure for the pneumatic wheel is 30 PSI.
Q: How should I assemble the axle and wheel?
A: To assemble the axle and wheel, follow these steps:
- Insert the first washer into the axle.
- Insert the wheel.
- Insert the second washer.
- Insert the pin into the axle.
- Bend the cotter pin.
Assembly Instructions
- Read the instructions thoroughly before proceeding.
- Tighten all parts by hand. Don’t use a power tool.
- For your safely, please do not overload.
- For the pneumatic wheel: Please check the air pressure in the tires. Maintain (30) PSI.
The First Step
The screw according to the line direction goes through the hole and lock
with ①toe plate and connection.
PS : The screw can’t be locked too tightly.
The Second Step
Please follow → directions for assembling. ①nose plate ②axle ③axle boxes
The axle should go through the axle boxes then, the axle boxes through be
combined with the hand truck body
The Third Step
- Firstly, insert the first washer into the axle.
- Secondly, insert the wheel.
- Thirdly, insert the second washer, and finally insert the pin into the axle. Please bend the cotter pin.
Must lock the connection on the upper first hole on the truck body.
The Fourth Step
Before inserting the ⑤handle insert the ⑤handle and locking screw.
2015.09.03 Lisa