testo 0560 5600 Smart Valve for Digital Refrigerant Scale User Manual

June 5, 2024
testo

testo 0560 5600 Smart Valve for Digital Refrigerant Scale User Manual

testo Smart Valve 0560 5600

www.testo.com

Approval and Certification

Product

产品名称

| testo smart valve
---|---
Mat.-No.

型号

| 0560 5600
Date

日期

| 24.03.2022

The use of the wireless module is subject to the regulati- ons and stipulations of the respective country of use, and the module may only be used in countries for which a country certifi- cation has been granted. The user and every owner has the obligation to adhere to these regulations and prerequisites for use, and acknowledges that the re-sale, export, import etc. in particular in countries without wireless permits, is his responsibility.

Bluetooth® Information 蓝牙信息

| Feature

特征与参数

| Values

数值

---|---|---
Bluetooth® range

范围

| Typical 50 m

50米无障碍场地

Radio type

型号

| Bluetooth®

Low Energy (BLE) 4.2

Bluetooth® company

制造商

| Lierda Science & Technology Group Co., Ltd
RF Band

射频频段

| 2402 – 2480MHz
Power output [E.I.R.P]

输出功率

| ≤10dBm
Bluetooth® SIG Listing| Declaration ID| D059666
Member company| Testo SE & Co. KGaA

IC Warnings

CAN ICES-003(B)/NMB-003(B):

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

RSS-Gen & RSS-247 statement:

This device contains licence-exempt transmitter(s)/recei- ver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:

  • this device may not cause interference, and
  • this device must accept any interference, including inter- ference that may cause undesired operation of the

Caution: Radio Frequency Radiation Exposure
This equipment complies with radio frequency exposure limits set forth by the Innovation, Science and Economic Development Canada for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders.

FCC Warnings

Information from the FCC (Federal Communications Commission)

For your own safety

Shielded cables should be used for a composite interface. This is to ensure continued protection against radio fre- quency interference.

FCC warning statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving
  • Increase the separation between the equipment and
  • Connect the equipment into an outlet on a circuit diffe- rent from that to which the receiver is
  • Consult the dealer or an experienced radio/TV techni- cian for

Caution

Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. Shielded interface cable must be used in order to comply with the emission limits.

Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • this device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired

Caution: Radio Frequency Radiation Exposure
This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment..
This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders.

Co-Location:

This device must not be co-located or operated in conjunction with any

other antenna or transmitter.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

testo User Manuals

Related Manuals