Homerun CT10 Smart Cat Toy User Guide
- June 5, 2024
- Homerun
Table of Contents
Homerun CT10 Smart Cat Toy
Product Diagram
- Power Button
- Feather
- Holes
- LED Indicator
- Battery compartment
Whatʼs in the Box
- 1 x Smart Cat Toy
- 4 x AA Batteries
- 1 x Spare Feather
How to Use
Remove the battery compartment cover, put 4 AA batteries into the battery compartment. Place the battery cover back on.
Power On / Off
- Press the Power Button once to turn on the unit with 2 beep sounds.
- Press it again to turn off the unit with 1 beep.
Select the Mode
Press and hold the Power Button to choose between High Speed / Medium Speed / Low Speed (Change Feather). LED indicator will change in cyan, yellow and purple accordingly. Release the button to select current mode, three beeps will be heard to confirm your selection.
High-Speed Mode (LED indicator light: cyan)
The feather pops out from the 6 entries randomly at highest speed and turns off
automatically in 8 minutes.
Medium Speed Mode (LED indicator light: yellow)
The feather pops out from the 6 entries randomly at medium speed and turns off
automatically in 8 minutes.
Low-Speed Mode (LED indicator light: purple)
The feather pops out from the 6 entries randomly at lowest speed. Turn off the
unit once the feather extends outermost. Then rotate the feather anticlockwise
to remove it or rotate the feather clockwise to install it.
Caution
- Please change the batteries when the LED indicator flashes red.
- Please install the batteries with the right polarities.
- Do not mix the new batteries with old ones.
- Do not charge non-chargeable batteries.
- Take out all the batteries from the battery compartment before storage or if it is to be idle for a long time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>