AXTON AT-25Y 530′-Range Essential Infrared Illuminator with Day/Night Sensor User Guide
- June 6, 2024
- AXTON
Table of Contents
AXTON AT-25Y 530′-Range Essential Infrared Illuminator with Day/Night
Sensor
WIRING
OPTION 1 Constant ON
AXTON Illuminators have been designed and tested to run 24/7 continuously both
indoors and outdoors.
OPTION 2 Automatic
Illuminator will trigger ON/OFF using the built-in ambient light sensor which
has been pre-set to a threshold of 5-15 lux. ON will trigger immediately while
OFF will trigger after a 12-18 second delay.
OPTION 3 External Controller (e.g. Camera)
You will need to log into the camera via the computer and program the I/O
ports to trigger when IR illumination is desired.
Make all electrical connections BEFORE applying power.
Voltage Input
Applying voltage other than the required range may cause permanent damage and
VOID WARRANTY.
WARNING! Infrared light is not visible.
Do not view directly with optical instruments (magnifiers) or stare directly
into the illuminator at a close distance.
Do not attempt to open or modify the light as this will void the warranty.
If you need a modification, electric or physical, contact us directly. We will
let you know if it can be done. All changes MUST be made at our factory.
QUESTIONS ? 801-519-0500 or [email protected] │ axtontech.com
801 Robinson Drive, Suite 500, North Salt Lake, UT 84054 [email protected]