one wofit JH-D1 Lying massage cushion User Manual

one wofit JH-D1 Lying massage cushion

Thank you for purchasing our massage pads.
Massage pad adopts ergonomic design to massage back, waist, buttocks, legs, etc. it is a massage product with multiple massage methods and warm compress function.
Before use, please read the manual carefully and pay special attention to safety precautions to ensure the correct operation and use of the product. Take good care of the manual for future reference.

instructions

Connect the DC power supply end of the product to the DC power port of the adapter, insert the power plug of the adapter into the household socket, and the indicator light of the manual controller is on, and the product is powered on.

Neck adjustment:

1. Press enter the automatic mode. If you press this key for the second time, the whole machine will be shut down. The functions of the automatic mode are asfollows: heating to tur  on the kneading and massage function, (1 minute forward rotation, next 1-minute reverse rotation, cycle in turn until the 15-minute timed end of shutdown) this key to turn on the machine with one key, and the whole machine will
2. It is one minute by default when the machine is turned on. Press the first time to turn on the forward rotation function, and press it again to turn on the reverse rotation function.
3. The machine is in three gears by default. Press gear; press this key again for high gear operation; press again to resume middle gear operation. for the first time to run at low for the first time to turn off
4. The heating function is turned on by default. Press the heating function; press this key again to turn on the heating again.
5. energy-saving design, press to enter energy-saving mode.
6. In the power-on state, press the key intelligent massage modes, press the fourth key to switch to the first intelligent massage mode, and so on.

We respect your rights and interests
Our company wholeheartedly provides you with perfect after-sales service.
Please fillin this card accurately and keep it properly when you purchase.
You can enjoy one year free warranty service with your warranty card.

During the warranty period, the company will charge the material cost according to the following circumstances when the service is required:

1. Improper use of goods for self repair:
2. Users who fail to comply with the specified power supply voltage
3. The appearance is naturally dirty due to use
4. Damage caused by natural or man-made disasters

In case of any of the following circumstances, the company charges according to the price:

• Beyond the warranty period
• Failure to produce service guarantee
• Ensure that the contents (e.g. product model s/N) in the secretary are inconsistent with the existing ones
• Ensure that the contents of the Secretary’s contents are vague and illegible and that the goods have been altered.

This guarantee is only applicable to the service guarantee of the machine itself. If the power plug outside the machine is not properly connected, the fuse is blown out, the socket is not in good condition, or all types of power circuit breakers are tripped, the labor cost will be charged.

Not suitable for users

Please consult your doctor before using this product

• Implantation of cardiac pacemakers or similar implantable medical devices
• Patients with acute diseases such as heart disease
• Suffering from strain back disease with weak or damaged bones, especially the backbones
• After surgery
• During pregnancy or shortly after childbirth
• Cancer, osteoporosis
• Have blood circulation problems or thromboembolism
• Suffering from skin infection
• There are abnormal phenomena in the limbs
• An accident or injury to the spine
• children or physical discomfort after surgery Weak and sickly
• The surface of the product is hot, and it should be paid attention to when it is used by people who are not sensitive to heat

Fault and maintenance

Motor complete in operation

Power indicator Not bright

| 1.   Power failure, power adapter Check the plug

2. Is the power plug correct Plug in the power outlet

Is the function key turned on

| Replace the p owersocke\

Connect�plugs correct�and firmly after recalling

l nsertthesocketandopenthelunctionkey
Massage and rolling Slow and weak Loud noise| 1.  Power failure

2. The core temperature is too high,

Automatic shutdown protection

| Use after calling

Wait for the core temperature to

reduce and restart

Loud noise| Running in a period of a new machine| After10hoursofuseThenoisenatural�decreases

• Switch/timing: select the switch button on the manual controller. Press the switch once, and then press the timer 10 minutes /20 minutes/30 minutes
• Mode selection: select the mode button on the hand controller. There are 1-9 massage modes foryou to choose.
• Strength adjustment book: select the strength button on the hand controller, the machine has a total of “1-9” massage strength for you to choose
• Speed adjustment: select the speed button on the manual controller, and the massage speed of this machine is “1-9” for you to choose.
• Position adjustment: select the positioning button on the hand controller. The massage position of the machine is 1~9 for you to choose.
• Heating adjustment: select the heating button on the manual controller. There are 1~3 kinds of massage heating buttons for you to choose.

Note: the neck can be connected to the power adapter separately.

Manual controller description

Technical parameter

• Product name: Lying massage cushion
• Product model: JH-D1
• Rated voltage: 12V=
• Rated power: 24W
• Executive Standards: GB4706.1-2005 GB4706.10-2008

All services for this product must be provided by our professional staff.
If the power line is damaged, in order to avoid danger, it must be replaced by the manufacturer or its maintenance department or similar full-time personnel [warm tips this machine is suitable for adapter power supply. If the adapter is damaged,
please go to the company’s designated parts maintenance center or dealer to replace the adapter with the same format

warm tips this machine is suitable for adapter power supply. If the adapter is damaged, please go to the company’s designated parts maintenance center or dealer to replace the adapter with the same format

Usage environment

• Please do not use the product in a wet environment such as a bathroom or near a water source, so as to avoid failure and even endanger personal safety.
• Do not use it in an environment with room temperature higher than 40 °C or in a local high-temperature environment such as an electric heater and stove.
• Do not use the product in the room temperature lower than 5°C, because the thickening of lubricating oil may increase the wear ot machine gears and bearing transmission parts and affect the service life,
• Do not use it outdoors or in a dusty environment, and avoid long-term exposure to the sun.
• IF the product is moved from a low-temperature storage place to a warm environment for use, the internal metal parts may accumulate water vapor, which may affect the normal operation of the product, or even cause damage to the machine.
• It is recommended that the product should be placed at normal room temperature for one hour before starting up.

Safety precautions

• In order to ensure the safety and correct use of this product, please be sure to understand all contents of this manual before use.
• This product is only suitable for 220 V -50 Hz Power Supply.
• This product is not a toy. Please take good care of children and make sure they don’t play with the product.
• This product is not intended to be used by people (including children) who are physically unsound, have a sensory or mental impairment, or lack relevant experience and knowledge, unless they are supervised and instructed by someone responsible for their safety
• Do not pull the power cord or use the power cord to hang the product, so as to avoid wire breakage or p0or contact. When pulling off the power plug, hold the plug and pull it out.
• If .lfthe power cord of the product is damaged, in order to avoid danger,it must be replaced by the manufacturer or its designated maintenance unit or professional maintenance personnel.
• Do not let the control panel touch water and other liquids. Do not operate the control switch with wet hands or feet if the surface of the product is damaged (such as cloth cover or leather on the
• The surface of the massage head), please stop using immediately to avoid personal injury
• Do not immerse the product in water. fitis accidentaly put into the water, t must be sent for repair and must not be used!
• Do not insert or drop items into any openings in the product to avoid unexpected damage to the product you want to cut off the power supply, please tum of operation control and all the power plug from the socket
• After use or before cleaning, please pull out the power plug from the socket.
• There is high voltage in the product. tis was forbidden to repair the product by yourself, otherwise, personal injury may be caused!
• If the machine breaks down,it should be stopped immediately. The machine must be sent to the manufacturer or its designated maintenance unit for maintenance before Use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>