Carron LD104 Thistle Chrome Wall Stay 300mm Installation Guide
- September 24, 2024
- Carron
Table of Contents
Carron LD104 Thistle Chrome Wall Stay 300mm
Specifications
- Components: Spigot, Collar, Clamping Plate (Threaded and
- Un-threaded), Thistle Head, Threaded Bar
- Usage: Wall Stay Fitting for radiators
Tools Required
Product Usage Instructions
- Attach Spigot to the wall through the central hole.
- Attach the Collar to the Spigot
- Screw the threaded Bar into the Collar as far as It can go In.
- Measure the distance from the wall to where the back of the radiator is to sit, as shown above. The Clamping Plate can be used in either a vertical or horizontal position. For radiators with a smaller space between each section, the Clamping Plate should be positioned Vertically. For radiators with a larger space between each section, the Clamping Plate should be positioned horizontally. Install the red washer, then the Thistle head will screw through the un-threaded clamping plate.
- The radiator should now be moved into position, making sure that it is sat against the Clamping Plate.
- Attach the Clamping Plate onto the Threaded Bar followed by the Collar. Tighten to the Clamping Plate. The Threaded Bar can now be cut
Frequently Asked Questions
Q: Can the Wall Stay Fitting be used for all types of radiators?
A: The Wall Stay Fitting can be used for most radiators, but it is recommended
to check compatibility based on your radiator’s specifications.
Q: How do I know if I need to position the Clamping Plate vertically or
horizontally?
A: For radiators with smaller spacing between sections, position the Clamping
Plate vertically. For radiators with larger spacing, position it horizontally.
www.carronheating.co.uk
T: 01400 263319 | E:
sales@carronheating.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>