Midea MDRB593FGE 435L Stainless Steel Combined Refrigerator User Manual

REFRIGERATOR
Bottom Freezer
USER MANUAL MODEL: MDRB593FGE
MDRB593FGF
SERIES
www.midea.com

** Please read the Manual carefully before use.
The Manual shall be kept in good custody for later reference
Dear users, thank you for choosing Midea refrigerator!**

 SAFETY WARNINGS

Warning: risk of fire / flammable materials

This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar non- retail applications.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.)
Children should be supervised to ensure that they do not play with the appliance.
IF the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
DO not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
THE appliance has to be unplugged after use and before carrying out user maintenance on the appliance.
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
WARNING: Please abandon the refrigerator according to local regulators for it use flammable blowing gas and refrigerant.
WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
DO not use extension cords or ungrounded（two prong）adapters.
DANGER: Risk of child entrapment.Before you throw away your old refrigerator or freezer:
-Take off the doors.
-Leave the shelves in place so that children may not easily climb inside.
THE refrigerator must be disconnected from the source of electrical supply before attempting the installation of accessory.
REFRIGERANT and cyclopentane foaming material used for the appliance are flammable. Therefore, when the appliance is scrapped, it shall be kept away from any fire source
and be recovered by a special recovering company with a corresponding qualification other than be disposed of by combustion, so as to prevent damage to the environment or any other harm. FOR EN standard: This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances. The necessity that, for doors or lids fitted with locks and keys, the keys be kept out of the reach of children and not in the vicinity of the refrigerating appliance, in order to prevent children from being locked inside.
TO avoid contamination of food, please respect the following instructions:
–Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
–Clean regularly surfaces that can come in contact with food and accessible drainage systems.
–Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has not been drawn for 5 days. （note 1）
–Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
–Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice cream and making ice cubes. （note 2）
–One -, two- and three-star compartments are not suitable for the freezing of fresh food. （note 3）.
–If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mold from developing within the appliance.
–For appliances without a 4-star compartment: this refrigerating appliance is not suitable for freezing foodstuffs.（note 4）
Note 1,2,3,4：Please confirm whether it is applicable according to your product compartment type.
FOR a freestanding appliance: this refrigerating appliance is not intended to be used as a built-in appliance.
ANY replacement or maintenance of the LED lamps is intended to be made by the manufacturer,its service agent or a similarly qualified person. This product contains a light source of energy efficiency class .
1 2 Meaning of safety warning symbols
This is a prohibition symbol. Any incompliance with instructions marked with this symbol may result in damage to the product or endanger the personal safety of the user.
This is a warning symbol. It is required to operate in strict observance of instructions marked with this symbol; or otherwise, damage to the product or personal injury may be caused.

This is a cautioning symbol. Instructions marked with this symbol require special caution. Insufficient caution may result in slight or moderate injury, or damage to the product.
This manual contains lots of important safety information ( which shall be observed by the users.

1.3 Electricity related warnings

• Do not pull the power cord when pulling the power plug of the refrigerator. Please firmly grasp the plug and pull out it from the socket directly.

• To ensure safe use, do not damage the power cord or use the power cord when it is damaged or worn.

• Please use a dedicated power socket and the power socket shall not be shared with other electrical appliances. The power plug should be firmly contacted with the socket or else fires might be caused. Please ensure that the grounding electrode of the power socket is equipped with a reliable grounding line.

• Please turn off the valve of the leaking gas and then open the doors and windows in case of leakage of gas and other flammable gases. Do not unplug the refrigerator and other electrical appliances considering that spark may cause a fire.

• Do not use electrical appliances on the top of the appliance, unless they are of the type recommended by the manufacturer.

1 4 Warnings for using

• Do not arbitrarily disassemble or reconstruct the refrigerator, nor damage the refrigerant circuit; maintenance of the appliance must be conducted by a specialist

• The damaged power cord must be replaced by the manufacturer, its maintenance department or related professionals in order to avoid danger.

• The gaps between refrigerator doors and between doors and refrigerator body are small, be noted not to put your hand in these areas to prevent from squeezing the finger. Please be gentle when closing the refrigerator door to avoid falling articles.

• Do not pick foods or containers with wet hands in the freezing chamber when the refrigerator is running, especially metal containers in order to avoid frostbite.

• Do not allow any child to get Into or climb the refrigerator: otherwise, suffocation or falling injury of the child may be caused.

• Do not place heavy objects on the top of the refrigerator considering that objects may fall when closing or opening the door, and accidental injuries might be caused.

• Please pull out the plug in case of power failure or cleaning. Do not connect the refrigerator to the power supply within five minutes to prevent damage to the compressor due to successive starts.

1.5 Warnings for placement

• Do not put flammable, explosive, volatile and highly corrosive Items in the refrigerator to prevent damage to the product or fire accidents.

• Do not place flammable items near the refrigerator to avoid fires.

• The refrigerator is intended for household use, such as storage of foods; it shall not be used for other purposes, such as storage of blood, drugs or biological products, etc.

• Do not store beer, beverage or other fluid contained in bottles or enclosed containers in the freezing chamber of the refrigerator; or otherwise the bottles or enclosed containers may crack due to freezing to cause damage.

1.6 Warnings for energy

Warning for energy

1. Refrigerating appliances might not operate consistently (possibility of defrosting of contents or temperature becoming too warm in the frozen food compartment) when sited for an extended period of time below the cold end of the range of temperatures for which the refrigerating appliance is designed.
2. The fact that effervescent drinks should not be stored In food freezer compartments or cabinets or in low-temperature compartments or cabinets, and that some products such as water ices should not be consumed too cold;
3. The need to not exceed the storage time(s) recommended by the food manufacturers for any kind of food and particularly for commercially quick-frozen food in food-freezer and frozen-food storage compartments or cabinets;
4. The precautions are necessary to prevent an undue rise in the temperature of the frozen food while defrosting the refrigerating appliance, such as wrapping the frozen food in several layers of newspaper.
5. The fact that a rise in temperature of the frozen food during manual defrosting, maintenance or cleaning could shorten the storage life.
6. The necessity that, for doors or lids fitted with locks and keys, the keys be kept out of the reach of children and not in the vicinity of the refrigerating appliance, in order to prevent children from being locked inside.

1.7 Warnings for disposal

Refrigerant and cyclopentane foaming material used for the refrigerator are flammable. Therefore, when the refrigerator is scrapped, it shall be kept away from any fire source and be recovered by a special recovering company with corresponding qualifications other than be disposed of by combustion, so as to prevent t damage to the environment or any other harm.
When the refrigerator is scrapped, disassemble the doors, and remove the gasket of 0 doors and shelves; put the doors and shelves in a proper place, so as to prevent the trapping of any child.
Correct Disposal of this product: This marking indicates that this product should not be disposed of with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Proper use of refrigerators

2.1 Placement

• Before use, remove all packing materials, including bottom cushions. foam pads and tapes inside of the refrigerator; tear off the protective film on the doors and the refrigerator body.

• Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery places to prevent rust or reduction of insulating effect.

• Do not spray or wash the refrigerator; do not put the refrigerator in moist places easy to be splashed with water so as not to affect the electrical insulation properties of the refrigerator.

• The refrigerator is placed in a well-ventilated indoor place; the ground shall be flat, and sturdy (rotate left or right to adjust the wheel for levelling if unstable).

• The top space of the refrigerator shall be greater than 30cm, and the refrigerator should be placed against a wall with a free distance more than 10cm to facilitate heat dissipation.

 Precautions before installation: Before installation or adjusting of accessories, it shall be ensured that the refrigerator is disconnected from power. Precautions shall be taken to prevent fall of the handle from causing any personal injury.
2.2 Door handle installation
precautions shall be taken to prevent fall of the handle from causing any personal injury.

(The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor)
Assembly steps
a. Use an alien wrench to fix screws into the screw holes tightly.
b. The reverse operation is for disassembly.
2.3 Leveling feet
Schematic diagram of the leveling feet

(The picture above is only for reference.The actual configuration will depend on the physical product or statement by the distributor)
Adjusting procedures:
a. Turn the feet clockwise to raise the refrigerator;
b. Turn the feet counterclockwise to lower the refrigerator;
c. Adjust the right and left feet based on the procedures above to a horizontal level.
2.4 Door right-left change

List of tools to be provided by the user

| Cross screwdriver| | Putty knife
thin—blade screwdriver
| 5/16″
socket and ratchet| | Masking tape

1. Please power off this appliance before conducting this operation. Remove all food from door shelves. Fix the door by tapes.

2. remove the decorative cover, hinge cover, upper hinge, and screws, and disconnect the box.The top right signal line (3 4 signal line terminal), disconnect the signal line (1) 2 signal line terminal), Connect the signal cable 5 to the signal cable Q, and connect the signal cable 0 to the signal cable 6.
   

3. Take off refrigerating chamber door, middle hinge (use a alien wrench to remove the middle hinge screw) and hole cap of other side.

4. Take off freezing chamber door, dismantle bottom hinge, hole caps, levelling foot, Install shaft of bottom hinge on the other side and install the bottom hinge on the other side.
   

5. a)Remove the upper cover of refrigerating chamber door and the left decorative cover, install the upper hinge sleeve, door signal line to the other side and install the door upper cover. Dismantle the stopper, self-locking and sleeve pipe of refrigerating chamber door. Take out left self-locking of refrigerating chamber door and right decorative cover from the accessory bag, assemble the sleeve pipe,left self-locking and stopper on the bottom left of door with screw, and then install the right decorative cover. b)Dismantle the stopper and sleeve pipe from the bottom right of the freezing chamber door, assemble the sleeve pipe, left self-locking, and stopper on the bottom left of door by screw.
   

6. Put freezing door on bottom hinge and install middle hinge, hole caps
   

7. Remove the magnetic switch of the right hinge cover and install it on the left hinge cover.

8. Remove the upper left hinge from the accessory bag and place the door body on the middle hinge.and install the upper left hinge; connect the signal line O on the top of the refrigerator to the signal line (D on the door, Connect the signal cable ® to the signal cable 9 and Install the left hinge cover and decorative cover.For door handle installation, please refer to (2.2 Installing Door Handle)
   (The picture above is only for reference.The actual configuration will depend on the physical product or statement by the distributor)

2.5 Changing the Light
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer. its service agent or similar qualified person.
2.6 Starting

• Before initial start. keep the refrigerator still for two hours before Connecting It to power supply.

• Before putting any fresh or frozen foods. the refrigerator shall have run for 2-3 hours, or for above 4 hours In summer when the ambient temperature is high.

• Spare enough space for the convenient opening of the doors and drawers or statements by the distributor.

2.7 Energy saving tips

• The appliance should be located in the coolest area of the room, away from heat-producing appliances or heating ducts. and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance.
• The appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the appliance less efficient.
• Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible. EN-11

 Structure and functions

3.1 Key components

(The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor)
Refrigerating chamber

• The Refrigerating Chamber is suitable for the storage of a variety of fruits, vegetables, beverages and other food consumed in the short term.
• Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.
• Foods are recommended to be sealed up before putting into the refrigerator.
• The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy use.

Freezing chamber

• The low-temperature freezing chamber may keep food fresh for a long time and it is mainly used to store frozen foods and make Ice.
• The freezing chamber is suitable for the storage of meat. fish, rice balls and other foods not to be consumed in short term.
• Chunks of meat are preferable to be divided into small pieces for easy access. Please be noted food shall be consumed within the shelf time.

Meat &Fish zone

• Suitable for short term (1-3 days) to store fresh fish, fresh meat, fresh food, etc.
• Near to the back and bottom of the drawer, food may be frozen slightly, the food that should not be frozen can not be placed in.

3.2 Functions

(The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor)
Display screen
C) Refrigerating chamber temperature display area 2: Freezing chamber temperature display area 3 Quick cool icon A Quick freeze icon IS’ Vacation icon i8 Lock icon
Operation button
A. Temperature setting button of refrigerating chamber B.Temperature setting button of freezing chamber C. Vacation/lock button
Display
When power is on the refrigerator for the 1st time, the whole display panel will shine for 3 seconds. Then the display panel enters the normal display. The first time for using the refrigerator,the default set temperatures of refrigerating chamber, freezing chamber is 5° C/-18 °C respectively. When the error occurs, the display panel shows the error code (see next page); during normal running, the display panel shows the set temperature of refrigerating chamber, and freezing chamber. Under normal running, if there is no operation or opening door action within 30s, the display panel will be locked,the light of the display panel will go out after the locked state continued for 30s.
Lock /unlock
In the unlock state, long-press the lock buttons for 3 seconds, enter the lock state, the icon 8 lights up and buzzer sounds, it means the display panel is locked, at this time, button operation cannot be implemented; In the lock state, long-press the lock button for 3 seconds, enter the unlock state, the icon 8 goes out and buzzer sounds, it means the display panel is unlocked, at this time, button operation can be implemented.
The temperature setting of the refrigerating chamber
Click the buttonto change the set temperature of refrigerating chamber, each click of the temperature adjusting button of the refrigerating chamber, the set temperature will be reduced 1° C. The temperature setting range of refrigerating chamber is 2-8 °C. When the set temperature is 2° C,
The temperature setting of the freezing chamber
Click the button . to change the set temperature of the freezing chamber, with each click of the temperature adjusting button of the freezing chamber, the set temperature will be reduced 1 °C. The temperature setting range for the freezing chamber is -24- -16°C. When the temperature is -24 °C, click the button again, and the set temperature of the freezing chamber will switch to -16 °C.
Mode setting
Quick cool mode g Long press the button der. for 3s to set Quick cool mode, The icon * lights up. The refrigerating chamber temperature displays 2 °C, it enters the Quick cool mode. Fridge Under Quick cool mode, press and hold the button for 3 seconds or press tr.’ briefly, the icon goes out, it exits Quick cool mode. The set temperature of the refrigerating chamber will automatically switch back to set temperature before. In Quick cool mode. When set in vacation mode, it exits Quick cool mode.
Quick freeze mode
F 66:e Long press the button -17:1– for 3s to set Quick freeze mode,the icon lights up. The freezing chamber temperature displays -24 °C, it enters the Quick freeze mode. Under Quick freeze mode, press and hold the 2:7421 button for 3 seconds or press f-77-77t: briefly, the icon goes out, it exits Quick freeze mode. The set temperature of the freezing chamber will automatically switch back to set temperature before. In Quick freeze mode. When set in vacation mode, it exits Quick freeze mode.
Vacation mode
Click the button Yarn to set vacation mode, the icon lights up. The refrigerating chamber temperature display goes out, the freezing chamber temperature displays -18 °C. Under vacation mode, click the button 2r,c’n again, the icon goes out, it exits vacation mode. The set temperature of refrigerating chamber and freezing chamber will automatically switch back to set temperature before vacation mode. When set to Quick cool mode and Quick freeze mode, it exits vacation mode.
Opening warning and alarm control
When open the refrigerator door, the door open music will play. If the door is not closed in two minutes, the buzzer will sound until the door is closed. Press any one button to stop the buzzer alarm. when open the door, the display panel will wake up and the internal lamp will light up.
Fault Indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though the refrigerator may still have cold storage function with the following faults, the user shall contact a maintenance specialist for maintenance, so as to ensure optimized operation of the appliance.

Maintenance and care of the appliance

4.1 Overall cleaning

• Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and energy saving.
• Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth dampened with soapy water or diluted detergent.
• The interior of the refrigerator should be cleaned regularly to avoid odor.
• Please turn off the power before cleaning the interior, remove all foods, drinks , shelves, drawers, etc.
• Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons of baking soda and a quart of warm water. Then rinse with water and wipe clean. After cleaning, open the door and let it dry naturally before turning on the power.
• For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps or corners), it is recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary, combined with some auxiliary tools (such as thin sticks) to ensure no contaminants or bacterials accumulation in these areas.
• Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the interior of the refrigerator or contaminated food.
• Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or diluted detergent. Dry with a soft cloth or dry naturally.
• Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water, detergent, etc., and then wipe dry.
• Do not use hard brushes, clean steel balls, wire brushes, abrasives (such as toothpastes), organic solvents (such as alcohol, acetone, banana oil. etc.). boiling water, acid or alkaline items, which may damage the fridge surface and interior. Boiling water and organic solvents such as benzene may deform or damage plastic parts.
• Do not rinse directly with water or other liquids during cleaning to avoid short circuits or affect electrical insulation after immersion.

Please unplug the refrigerator for defrosting and cleaning.)
4.2 Cleaning the glass shelf

•  Remove the drawer on the glass shelf;
• Lift up the front of glass shelf(about 60°). and then pull out;
• Remove the glass shelf and clean as needed;
• The reverse operation is for the installation of glass shelf.
  

4.3 How to take out the pearl cotton block inside humidification shelf components

• The pearl cotton is used to separate the humidity-conditioning shelf from the moisture-proof cover (to prevent the moisture-proof cover from falling off during transportation). After unpacking, the user needs to remove this pearl cotton from the moisture-retaining shelf assembly. Removal method: grip both sides of the pearl cotton by hand and pulls out hard until the pearl cotton completely leaves the moisturizing shelf assembly.

4.4 Defrosting

• The refrigerator is made based on the air-cooling principle and thus has an automatic defrosting function. Frost formed due to a change of season or temperature may also be manually removed by disconnection of the appliance from the power supply or by wiping with a dry towel.

4.5 Out of operation

• Power failure: In case of power failure, even if It is In summer, foods inside the appliance can be kept for several hours; during the power failure, the times of door opening shall be reduced, and no more fresh food shall be put into the appliance.
• Long-time nonuse: The appliance shall be unplugged and then cleaned; then the doors are left open to prevent odor.
• Moving: Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable holder, freezing chamber drawers and etc. with tape, and tighten the leveling feet; close the doors and fix them with tape. During moving, the appliance shall not be laid upside down or horizontally, or be vibrated; the inclination during movement shall be no more than 45°.

**** The appliance shall run continuously once it is started. Generally, the operation of CAs the appliance shall not be interrupted: otherwise, the service life may be impaired. )

Troubleshooting

You may try to solve the following simple problems by yourself. If them cannot be solved, please contact the after-sales department.

Failed operation| .1 heck whether the appliance is connected to power or whether the plug is in well contact
heck whether the voltage is too low heck whether there is a power failure or partial circuits have tripped
---|---
Odor| bdorous foods shall be tightly wrapped Check whether there is any rotten food glean the inside of the refrigerator
Long-time operation of the compressor| Long operation of the refrigerator is normal in summer when the ambient temperature is high
It is not recommended having too much food in the appliance at the same time Food shall get cool before being put into the appliance The doors are opened too frequently
Light fails to get lit| Check whether the refrigerator is connected to power supply and whether the illuminating light is damaged
Doors cannot be properly dosed| The door is stuck by food packages The refrigerator is tilted
Loud noise| heck whether the floor is level and whether the refrigerator is placed stably Check whether accessories are placed at proper locations
Door seal fails to be tight| Remove foreign matters on the door seal Heat the door seal and then cool it for restoration
(or blow it with an electrical drier or use a hot towel for heating)
Water pan overflows| here IS t0o muen 1000lbthe chamber or food s re -conta ns too much water, resulting in heavy defrosting The doors are not closed properly, resulting in frosting due to entry of air and increased water due to defrosting
Hot housing| Heat dissipation of the built-in condenser via the housing, which is normal. When housing becomes hot due to high ambient temperature and storage of too much food,it is recommended to provide sound ventilation to facilitate heat dissipation.
Surface condensation| on the exterior surface and door seals of the refrigerator
is normal when the ambient humidity is too high. Just wipe the condensate with a dean towel.
Abnormal noise| buzz: The compressor may produce buzzes during the operation, and the buzz are loud, particularly upon start or stop. This is normal.
Creak: Refrigerant flowing inside of the appliance may produce creak, which is normal.

Tabil 1 Climate classes

Table 1 Climate classes| |
---|---|---
Class| Symbol| Ambient temperature range °C
Extended temperate| SN| + 10 to + 32
Temperate| N| +16 to + 32
Subtropical| ST| + 16 to + 38
Tropical| T| +16 to + 43

Extended temperate: ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C’; temperate: ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C’; Subtropical: ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C’; Tropical: ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C’;
The ordered parts in the following table can be acquired from channel MIDEA:

last model is launched on the market
temperature sensors| Professional maintenance personnel| At least 7 years after the last model is launched on the market
printed circuit boards| Professional maintenance personnel| At least 7 years after the last model is launched on the market
light sources| Professional maintenance personnel| At least 7 years after the last model is launched on the market
door handles| Professional repairers and final users| At least 7 years after the last model is launched on the market
door hinges| Professional repairers and final users| At least 7 years after the last model is launched on the market
trays| Professional repairers and final users| At least 7 years after the last model is launched on the market
baskets| Professional repairers and final users| At least 7 years after the last model is launched on the market
door gaskets| Professional repairers and final users| At least 10 years after the last model is launched on the market

Dear customer

1. If you want to return or replace the product, please contact the store where you buy. (Remember to bring the purchase invoice)
2. If your product breaks down and needs to repair, please contact the after-sales service provider.

Light source in this product is replaceable only by qualified engineers.

Please take out the plug before removal.
Remove the lampshade with a screwdriver.
Take down the lamp panel.

Remove the connection terminal.

References

• Midea - Make yourself at Home - World's Number 1 Appliance Producer

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>