r-go RGOCONMWDBL Numpad Break User Guide
- June 5, 2024
- R-Go
Table of Contents
R-Go Numpad
Break
Keyboard addition
Manual
Wired
What’s in the box?
R-Go Break
Download the R-Go Break software at www.r-go-break.com
The R-Go Break software gives you insight into your work behavior. The R-Go Break devices are equipped with a LED light. This light changes colour during use to indicate when it is time to take a break.
Product overview
- Cable to connect Numpad to computer
- Cable to connect Numpad to R-Go Split Break keyboard or R-Go Compact Break keyboard
- R-Go Break indicator
- Num Lock indicator
- USB-C to USB-A converter
Setup
A. Connect the Numpad to your computer by using cable 01. Plug the micro USB
into the pad and the USB-C into your computer. use converter 05 to convert
into USB-A|
---|---
B. Connect the Numpad to another keyboard (for example the R-Go Compact
Break keyboard) by plugging cable 02 into the Numpad and into the keyboard.|
Troubleshooting
Is your Numpad not working properly, or do you experience problems while using it? Please follow the steps mentioned below.
- Check if the Numpad is connected using the correct connector and cable (page 7)
- Connect the Numpad to another USB port of your computer
- Connect the Numpad directly to your computer if you are using a USB hub
- Restart your computer
- Test the Numpad on another computer, if it is still not working contact support (www.r-go-tools.com)
Function keys
To turn on the Numpad Num Lock function, type the Num Lock key. When the
indicator 04 light is on, you know the Num Lock function is activated.
Note: the Num Lock function key applies only to the Numpad.
Compliance
Health and safety information
This symbol identifies safety and health messages in the Product Guide and
other product manuals.
Warning: Read this safety and health information
Read this guide for important safety and health information and keep all
printed guides for future reference. If you do not follow the instruction and
do not install, use, and maintain this product properly, you are at greater
risk of serious injury, or damage to the device or computer.
For an online version of this manual, go to www.r-go-
tools.com/support
Warning: Do Not Attempt Repairs
Repair and maintenance of this equipment should be made only by R-Go Tools
authorized technicians. Improper repairs and use can create safety hazards.
Any evidence of any
attempt to open and/or modify the device, including any peeling, puncturing,
or removal of any of the labels, will void the limited warranty.
Product Precautions
-Do not store the device in areas of high humidity.
-Do not expose the device to heat or direct sunlight for an extended period of time.
-Refrain from bending USB cord with unnecessary force.
-Do not disassemble and remodel randomly.
-Do not drop, apply extreme pressures, or otherwise physically damage the device.
For customers in Europe
R-Go Tools b.v. hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of the EC EMC directive
2014/30/EU, and RoHS directive 2011/65/EC.
Compliance with these directives is assessed using applicable European
Harmonized Standards.
To obtain a copy of the Declaration of Conformity (DoC) with this Directive,
please visit the following URL: http://www.r-go-tools.com/en/ info/ce-compliance/
Disposal of Old Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste.
Instead, it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling of materials will
help to conserve natural resources. For more detailed information about
recycling of this product, please contact your local Civic Office, your
household waste disposal service or the shop where the product was purchased.
Trademarks and notice
R-Go HE, HE, R-Go Break, and R-Go HE Break are trademarks of R-Go Tools B.V.
Microsoft Windows® (98/ME/XP/VISTA/7/8/10) are registered trademarks of
Microsoft Corporation in the United States and/or other countries. IBM and
PC/AT are registered trademarks of International Business Machines
Corporation. All other names of systems, products, and services are trademarks
of their respective owners.
In this manual, the ™ or ® marks are not specified.
Before Use
This product is equipped with USB 2.0 technology.
It can be used with IBM PC/AT compatible omputers pre-installed with Windows,
macOS or Linux. and integrated USB 2.0 port functionality.
Depending on the personal computer or version of software you are using, the
product may not operate by function correctly.
Notes
The operation cannot be guaranteed for all computers meeting the above system
requirements. Operation is not guaranteed for home-built computers, white-box
PCs, and computers with an upgraded OS or multiboot system environment.
Contact information:
This is a product from R-Go Tools b.v. The product is manufactured in China
Address:
R-Go Tools b.v.
Techniekweg 15
4143 HW Leerdam
The Nederlands
Phone number: +31 345 758000
Email address: info@r-go-tools.com
Website: www.r-go-tools.com
References
- Buy and Sell Domain Names | Dan.com
- GoToolsApp
- Break software - R-Go Tools
- Home - R-Go Tools
- Home - R-Go Tools
- Home - R-Go Tools
- Support - R-Go Tools
- Home - R-Go Tools
- Home - R-Go Tools
- Home - R-Go Tools