ELECTRO PARTS Power Inverter LED Remote User Manual
- June 5, 2024
- ELECTRO PARTS
Table of Contents
ELECTRO PARTS Power Inverter LED Remote
Please read this manual carefully prior to storage, installation, wiring,
operation and maintenance of remote control
This manual contains important instructions and warnings that you should
follow during the storage, installation, wiring, operation and maintenance of
remote control Failure to follow these instructions and warnings will void the
warranty.
Please note that only qualified and trained technicians can do installation,
wiring, operation and maintenance of remote control.
Safety Instruction
General Safety
-
Do not expose the power inverter and remote control to rain, snow, spray or dust.
-
To avoid the risk of fire and electric shock, make sure that the existing wiring is in good electrical condition, and the wire size is not undersized.
-
An over current protection at the time of installation shall be provided by others for the AC output circuit.
-
When working on the remote control, please remove watches, rings, or other metal objects. Use tools with insulated handles and wear rubber gloves and boots.
Other Safety -
Upon receipt, examine the carton box for damage. If you have found any damage on the carton box please notify the company you purchased this power inverter from.
-
Do not operate near water or in excessive humidity.
-
Do not open or disassemble the remote control, and warranty may be voided.
-
Do not operate the remote control close to combustible gas or open fire.
-
Do not operate appliances that may feed power back into the remote control.
-
The remote control should be operated in an ambient temperature range of -20 ﾟ C to 40 ﾟ C otherwise the output efficiency may be affected.
Introduction
2-1 LED remote control Introduction
Before powers on LED remote control please ensure inverter main dip switch stays in remote mode (dip switch S6 stay in 0 positions) and connect the remote port between inverter and LED remote control with correct cable.
The remote is designed to easily and quickly power on/off inverter.
Functions and Features
- Power on/off inverter.
Appearance and Mechanism
Appearance and Dimension (in MM)
Front Panel
LCD Remote Control Panel Selection Buttons and LED indicators
| I-CON | Description |
|---|---|
| **** | Power on/ off |
| Status | LED light up when power on inverter |
Maintenance
When cleaning the case or front panel, use a soft and dry cloth only. If the
case or front panel is very dirty, use a neutral, non-abrasive detergent. Do
not use alcohol or ammonia based solutions.
Regular service and relocation of the power inverter should be performed by a
qualified service technician. Avoid spilling liquid on the remote control
panel.
Warranty
We guarantee this remote control panel against defects in materials and
workmanship for a period of 24 months from the date of purchase. In case you
need to repair or replace any defective power inverter, please contact local
distributor.
This warranty will be considered void if the remote control has been misused, altered, or accidentally damaged. Seller is not liable for anything that occurs as a result of the user’s fault.