Proxtend Epode Pro USB headset User Guide
- June 5, 2024
- proxtend
Table of Contents
Proxtend Epode Pro USB headset
OVERVIEW
- T-pad
- Adjustable Steel Headband
- Headband
- Speaker
- Mic Boom
- Microphone
- Clip
- Volume controller
- USB Plug
Headband can be adjusted max. at 40mm (monaural) or 80mm (binaural) to meet all requirements for comfort wearing.
Set up
Connect the USB adaptor into any USB port on the computer. This cable is plug and play and does not require software installation.
Microphone Boom
Microphone boom is 330°rotatable. Position the microphone boom to leave a width of 30-50mm between the lower lip and microphone for best communicating position.
Volume Controller
- In-line microphone mute: press mute button to activate mute, press again to de-activate mute.
- Microphone mute LED indicator (red).
- In-line speaker volume controller: press “+” to increase speaker volume, press”-” to decrease speaker volume. 4: Hook LED indicator (blue).
- In-line hook for answer/end call: press the button to answer the call, press again to end the call.
features
- Plug and Play USB 2.0
- HD Audio Sound
- Noise Cancelling Microphone
- DSP Technology
- Hearing Protection
- In-line audio control
- Wide compatibility
- Adjustable padded headband
- 330°rotatable microphone arm
- Large Protein leather ear cushions
- Convena Distribution A/S
Industriholmen 51, 2650 Hvidovre, Denmark
specifications
- Speaker sensitivity: 108 ± 3dB (at 1 KHz 1mw) Speaker impedance: WB: 32Ω +/-15%
- Speaker max input power: 30mW
- Speaker frequency range: WB:100Hz – 10KHz Microphone type: Uni-directional
- Microphone sensitivity: -42 ± 3dB (0dB = 1V/Pa,1KHz) Microphone frequency range: 100Hz – 10KHz Speaker bandwidth music
- mode: WB:100Hz – 10KHz Speaker bandwidth speak mode: WB:100Hz – 10KHz Microphone bandwidth: 100Hz – 10KHz
Cord length: 210cm
References
Read User Manual Online (PDF format)
Loading......