XCHO TC-021 Electric Dog Training Collar For Pet Trainer User Guide
- June 5, 2024
- XCHO
Table of Contents
XCHO TC-021 Electric Dog Training Collar For Pet Trainer
TRAINING OPERATION
- Power On: Press the button to turn on the devices.
- Dog Selection: Press the dog channel switch button to cycle among 1-2-3 channels.
- BEEP Training: Press the BEEP button, and the receiver emits 2 beeps. Long press the beep button to execute the instruction without interruption.
- Vi b r a t i o n Tr a i n i n g : P r e s s t h e vibration button, the receiver starts to vibrate. Long press the vibration button to execute the instruction without interruption.
- E-Shock Training: Press the E-Shock button and the receiver will release the electric shock. Intensity 0 means the E-Shock is off. The E-Shock does not support uninterrupted execution. Long press is invalid. You must press it every time.
PAIRING OPERATION
Tips: In the 1-pair package, the receiver and controller are already paired on channel 1 by default.
- Operate The Receiver: In the shutdown state, press and hold the power button for 5 seconds to enter the pairing state, with the red and green lights flashing alternately. At this time, the release button and the receiver is waiting for the pairing signal.
- Operate The Remote: First select the desired remote control dog channel, after the receiver is ready for pairing, press and hold the remote control V key for 3 seconds, and the remote control will transmit a pairing signal.
- Automatic Pairing: When the receiver receives the pairing signal, the red and green lights stop flashing alternately, and the 3 beeps sound, indicating that the pairing is successful. At the same time, the remote control channel number will also flash for 3 seconds, indicating that the pairing is successful.
- Change The Channel: If you want to change the receiver’s channel, please repeat the above operation.
Read User Manual Online (PDF format)
Loading......