Cisco Systems 073002357 printing Systems Inc Communication Module User Manual
- June 5, 2024
- Cisco Systems
Table of Contents
Cisco Collaboration Device
User Manual
Safety Information
Where to Find Product Documentation
Product Information https://help.webex.com
https://www.cisco.com/go/telepresence/docs
Warranty Information https://www,vcisco.can/go/warranty
Regulatory, Compliance, and Safety Information
https://www.cisco.ccm/go/telepresence/docs
End-User License Agreement and License Information
https://www.cisco.ccni/go/eula https://www.cisco.ccm/go/license
Antennas
The device has integrated antennas that cannot be replaced.
Radio Channels
The devices use World Mode (802.11d) to determine operating channels and
transmit powers
Intended Use
This product is a collaboration endpoint for use primarily in an office
environment.
For indoor use only.
Installation
Minimum separation distance: 10 cm /4 in
http://www.cisco.com/web/JP/techdoc/index.html
Safety Instructions – Warnings Informations: Read the installation instructions before using, installing, or connecting the system to the power source.
Ultimate disposal of this product should be handled according to all national
laws and regulations.
No user-serviceable parts inside. To avoid the risk of electric shock, do not
open.
Installation of the equipment must comply with local and national electrical codes.
National Restrictions
This section identifies countries that have additional requirements or restrictions.
For FCC
Modification Statement (§15.21):
Changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Compliance Statement (§15.19):
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Class B Interference Statement (§15.105b):
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This the equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference, to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- reorient or relocate the receiving antenna
- increase the separation between the equipment and receiver
- connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- consult the dealer or an experienced radio/TV technician for help
For IC
Interference Statement (RSS-GEN, Section 8.4):
This device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
5150-5250 MHz is limited to use indoors only.
Exposure statement (§2.1091)
To comply with FCC/IC RF exposure limits for general population / uncontrolled exposure, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.
EU Directive 2014/53/ EU-Compliance Information for the Cisco Collaboration series Wireless LAN products.
Scope
The information in this document is applicable to the Cisco Collaboration
series of wireless LAN products that currently include the Webex Desk and
Webex Desk Mini devices. These products are intended to be placed on the
market within the European Union, Lichtenstein, Switzerland, Iceland, Norway,
Turkey, and other countries that have implemented the EU Directive 2014/53/EU.
Simplified EU Declaration of Conformity
This declaration is only valid for configurations (combinations of software,
firmware, and hardware) provided and/or supported by Cisco Systems for use
within the EU or
countries that have implemented the EU Directives and/ or spectrum regulation.
The use of software or firmware not supported/provided by Cisco Systems may
result that
the equipment is no longer compliant with the regulatory requirements.
Note: The full declaration of conformity for these products can be found at:
• Cisco Webex Desk: http://www.cisco.com/web/dofc/22360623.pdf
• Cisco Webex Desk Mini: http://www.cisco.com/web/dofc/22595620.pdf
A Cisco.com login is required to access this document. You can register for a Cisco.com account if you don’t have one.
Art. 5th – Resolution Nº 680/2017
This equipment is not entitled to protection from harmful interference and may not cause interference with duly authorized systems.
On our website, you will find an overview of the worldwide Cisco contacts.
Go to:
https://www.cisco.com/web/siteassets/contacts
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose, CA 95134 USA
78-101223-01B0
© 2021 Cisco Systems, Inc.
All rights reserved.
Documents / Resources
|
Cisco Systems 073002357 printing Systems Inc Communication
Module
[pdf] User Manual
073002357 printing Systems Inc Communication Module, printing Systems Inc
Communication Module, Inc Communication Module, Communication Module, LDK0730,
02357
---|---
References
- Cisco — Россия
- イントロダクション - Cisco
- Cisco — Россия
- Webex Help Center
- Garanties relatives aux produits - Cisco
- Cisco Software Central
- Products - Product Warranties - Cisco
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>