Gabb Watch 3 Smartwatch User Guide
- June 15, 2024
- gabb
Table of Contents
Watch 3 Smartwatch
User Guide
Product safety & warranty information
Important Safety & Precautions
| The device is water-resistant, but submerging the device underwater is not
recommended.| | Do not use or set up your device while driving.
---|---|---|---
| Turn off the device when boarding an aircraft.| | Do not attempt to modify
or disassemble the device and battery, which may cause injury and void the
warranty.
| Do not expose your device to any source of fire, such as gas fumes, to
prevent explosion.| | Do not dispose of your device in fire.
| Do not talk or text with your device while walking.| | Keep your device away
from anything with a magnetic field.
| Do not use your device at gas stations.| | Turn off your device when you are
near medical instruments to prevent interference.
| Do not use or store your device under extreme temperatures.| | Observe the
law that may prohibit or restrict use of certain features of your device.
| To prevent possible hearing damage, do not listen at high volume levels for
long periods. Exercise caution when holding the device near your ear.| |
FCC Compliance
This mobile device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation. Any change or modification that is not expressly approved by the manufacturer responsible for the compliance of this device voids the user’s authority to operate this device. This mobile device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- .Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR)
Your mobile device meets governmental regulations for radiation exposure. Your
device includes a radio transmitter and receiver. This device is designed and
manufactured not to exceed the emission limits for exposure to radio frequency
(RF) set by the Federal Communications Commission (FCC) of the U.S.
Government. The RF emission limits set by the FCC employs a unit of
measurement known as Specific Absorption Rate (SAR), which measures the amount
of RF energy absorbed by a human body when using a mobile device. The
applicable SAR limit defined by the FCC for a mobile communication device is
is 1.6 W/Kg (16 watts per kilogram). The limit is set with a substantial
margin of safety to assure the safety of the public as well as to account for
any change in ambient environments.
Tests of SAR measurements are conducted by following standard device operating
and testing positions under the FCC guidelines with the device transmitting
its highest certified power level across all tested frequency bands. The
maximum SAR values for this device as reported to the FCC are as follows:
- The highest reported mouth SAR value: 1.06W/Kg
- The highest reported wrist-worn SAR value: 2.53W/Kg
This device has received Equipment Authorization from the FCC. Detailed SAR
information of this device including all the reported SAR values can be found
on www.fcc.gov/oet/ea/fccid using the FCC
ID of this device: RYQGW23.
When using the watch near your face, keep a minimum separation of 10 mm to
ensure exposure levels remain at or below the tested limits.
This equipment complies with the FCC RF radiation exposure limits set forth
for charging mode. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
About wrist-worn testing
To test wrist-worn SAR value, this device has been tested and meets the FCC
RF exposure guidelines for use with an accessory that contains no metal
substance. To test wristworn SAR value, this device has been tested and meets
the FCC RF exposure guidelines for use at 0 mm with an accessory that contains
no metal substance.
§15.19 (a)(3)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
§15.21
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
WEEE
This device must not be disposed of as normal household waste, in accordance
with the EU directive for waste electrical and electronic equipment (WEEE –
2002/96/EC). Instead, it should be disposed of by returning it to the point of
sale, or to a municipal recycling collection point.
Battery Safety Measures
- Do not disassemble, crush, deform, or probe the device’s battery.
- The recommended operating temperatures are 0 °C to 35 °C and the storage temperatures are -20 °C to +45 °C. Extreme temperatures can damage the device and reduce the charging capacity and lifespan of your device and battery.
- Do not attempt to modify, tamper, or reengineer the battery.
- Do not attempt to insert foreign objects into the battery.
- Do not immerse the battery in the water or other types of liquid.
- Do not expose the battery to liquids, chemicals, and source of fire to prevent explosion or other hazards.
- Only use the specified battery for the device.
- Only use qualified charging accessories. Use of unqualified battery or charging accessory may result in risk of leakage, fire, explosion, or other hazards.
- Do not short-circuit the battery.
- Avoid bringing metal into contact with batteries.
- Use of battery by children must be supervised.
- Only authorized service providers shall replace the battery. In the event of battery replacement, the battery must be replaced with a new battery that meets the specified standard.
- Dispose of used batteries in accordance with the regulations where you are using the device.
- Avoid dropping the device or the battery on hard surfaces to prevent damages.
- Improper use of battery may result in damage, injury, or other hazards, and voids the warranty.
- Only use qualified adapters.
Maintenance & Care
For optimal experiences, please observe the guidelines below for maintenance and care of the device.
- Clean your device with a soft, dry cloth when it is switched off.
- Avoid using or storing your device under excessive moisture or extreme temperatures.
- Do not subject your device to severe shock to prevent damage or malfunctioning.
- Do not place heavy objects on top of your device.
- The screen surface is subject to scratches. Avoid contacting with sharp objects. Non-adhesive generic screen protectors designed specifically for LCD panel may help.
- Do not expose your device to extreme heat or direct sunlight for prolonged periods to prevent damage arising from overheating.
- Do not use paper towels to clean the screen.
- Do not clean the device with alcohol, cleaning detergent, solvents, or abrasive substance.
- Do not attempt to disassemble, repair, or make any modifications to your device. Doing so will cause damage or injury, and will void the warranty.
- Repair shall be conducted by authorized, trained technicians.
- Store your device in a dry, cool place.
- Keep your device away from flammable liquids, gases, or explosive materials.
- Do not wear the device while it is being charged.
- Do not place metallic or magnetic objects near the charging part of the device.
- Do not place your device in or near heating equipment such as water heaters, microwaves, or cooking appliances.
Proper Product Handling
About device water-resistance
-
Your watch is water-resistant (IP68 rated), but not waterproof.
For instance, your watch can withstand rain, splash, sweat, and hand-washing, but submersion below shallow depth or high velocity water such as diving and snorkeling is not recommended -
It is advised to avoid submerging your watch into swimming pools and sea water, as swimming pools and sea water contain high amounts of chlorine and salt respectively, which may damage parts of your watch.
-
Water resistance isn’t permanent, and the following conditions may impact the performance and should be avoided:
• Dropping your watch from an elevated place
• Impacting your watch by heavy objects
• Exposing your watch to soap or shower gel
• Exposing your watch to perfumes, solvents, detergents, pesticides, lotions, acidic liquids, and hair dye
• Exposing your watch to high ambient temperature, like wearing it in a steam room or in a sauna
If your watch gets into contact with the substances mentioned above, clean it with fresh water immediately and apply dry cloth (lint-free). -
In case your watch gets wet, dry it with lint-free cloth. If the speaker sound’s muffled due to accidental submersion of the watch, don’t insert any object into the microphone or the speaker port and don’t shake the watch to empty the water out. Simply place your watch in a place with good air circulation and away from the harmful substances mentioned above. The evaporation process will bring the speaker back to normal.
Note about IP68 protection of your watch:
Your watch complies with the requirement and acceptance condition of IEC 60529
Edition 2.2: 2013 Degrees of Protection Provided by Enclosures — IP68. This
indicates that your watch meets the First Characteristic Numeral 6 for Degrees
of Protection against Access to Hazardous Parts and against Solid Foreign
Objects, and the Second Characteristic Numeral 8 for Degrees of Protection
against Ingress of Water.
Keep out of reach of small children
Do not leave your device and its accessories within the reach of small
children. Your device includes small parts that may be detached or cause a
choking hazard. They could hurt themselves or damage the device.
Beware of magnetic fields
Do not expose your device to objects or equipment that have magnetic fields,
for instance, hospital MRIs. Magnetic fields may negatively affect the proper
functionality of your electronic device. If an anomaly occurs, take your
device to an authorized, trained personnel for diagnosis and repair.
About charging
Only use the qualified charging accessories. Use of unqualified charging
accessories may damage your device and void the warranty.
Avoid charging your device in a wet environment or place with extreme
temperatures. If your charging accessory is wet or damaged, do not use it to
charge your device.
Warning: Warranty will become Void if cover on bottom of watch is
removed.
Device heating
There are conditions when your device may become warm:
- It is being charged.
- It is under direct sunlight for a lengthy period.
- It is inside a vehicle without air conditioning turned on.
- It is undergoing a software/firmware upgrade.
- It is transferring data.
- It is making long calls.
- It is in a low cell signal area.
If you experience discomfort, take off the watch immediately. If the
overheating message appears on the display of the device, take off the watch
immediately and store it in a cool, dry place.
Sensitive skin
Some users may experience allergies when wearing wearable electronic devices
for a prolonged period, due to skin allergies, environmental factors or
irritants. When an allergic reaction occurs, take your device off for a while.
It is suggested to keep your skin clean and dry to reduce the likelihood of
allergies. Also, loosening the wrist band a bit may help with the condition.
If your skin shows allergic symptoms around the area where you wear the
device, consult with a physician immediately.
Protect your hearing
This device can generate high volume of sounds. To prevent possible hearing
damage, do not listen at high volume levels for prolonged periods. Avoid
holding your device near your ear for a long period if it is set at high
volume.
If you experience any discomfort or temporary hearing difficulty when
listening to audio files from your device, discontinue the use and consult
with a physician immediately regarding the symptoms.
Safety in driving
Do not use or set up your device while driving. Use of wearable devices while
driving could put you and others at greater risks of accidents causing serious
injury, casualty and property loss. Abide the traffic laws and regulations on
the use of wearable devices in the jurisdictions where you drive. It is users’
sole responsibility to pay full attention to driving.
Safety in aircraft
Switch your device off when you are on an airplane, as the radio waves from
your device may affect in-flight piloting instruments, which may impact safety
during the flight. The use of communication devices on an aircraft is against
the law. Be sure to follow the regulations imposed by your government. If you
need to use your device on the aircraft, be sure to switch to Airplane Mode if
it is supported in your device.
In a hospital
Switch your device off when you are in a hospital or healthcare facilities.
Your device generates RF frequency that may cause interference with critical
medical instruments. This may result in a faulty or an anomaly diagnosis. In
addition, some instruments in healthcare facilities may radiate strong
magnetic fields which may negatively impact the functionality of your device.
Gas station and explosive hazards
When you are at gas stations or environments with explosive hazards, obey all
the posted warning signs to turn off your device.
Pacemakers and hearing aids
People with hearing aids or pacemakers may experience interfering noises when
using this device. The level of interference depends on the type of hearing
aid or pacemaker, as well as the distance from the interference source.
It is recommended to increase the separation between this device and the
hearing aid/pacemaker to reduce the interference. You may also consult your
physician to discuss about alternatives.
Disposal and recycling
Do not dispose of this device in a household garbage bin.
Products with this label must be taken to specific collection points at the
end of their life. You can learn more about how to recycle your mobile device
by visiting the CTIA website at www.ctia.org/news/how-to-recycle-your-
mobiledevice
Limited Warranty
Your product is warranted that it is free from any defect in workmanship and
material, under normal use and condition, for a period of 1 year from the
original date of purchase shown on your original invoice or receipt. If any
such defects are found in this product within the applicable warranty period,
the manufacturer (Gabb Wireless Inc.) shall, at its discrete options during
the applicable warranty period, carry out repair or replacement for the
defected product or part.
Such repair or replacement is subject to verification of the defect or
malfunction and proof of purchase shall be confirmed by showing the model
number on receipt of invoice with the original date of purchase. The warranty
does not apply if any of the following circumstances occur:
- The warranty period has expired.
- Proof of purchase is absent.
- Transfer or resale of the product from any third party, including, but not limited to, any subsequent purchasers or owners of the product.
- Normal wear and tear of the product due to natural ambient conditions or force majeure, such as humidity, oxidization, corrosion, penetration of liquids, and extreme temperatures.5
- Damage caused by connection with accessories, equipment, or peripherals that are not specified by the manufacturer or not compatible with this product.
- Damage caused by disassembly, modification, or repair performed by unauthorized technician or individual.
- Damage caused by non-compliance with the recommended device use instructed in the User’s Manual.
- The IMEI label on this product has been modified, altered, or removed.
The purchaser or user will be responsible for any cost regarding replacement
of parts, reinstallation, transportation, and any other cost that may be
incurred for the repair or replacement if any of the circumstances mentioned
above are determined.
This warranty statement constitutes the entirely expressed warranty, and there
is no other expressed warranties, regardless of written, oral, or implied
manner. This limited warranty applies only to the original purchaser of the
product and cannot be transferred or assigned to any subsequent owner or user.
No other party, whether dealer, service center, or agent, or employee(s) of
such, is authorized to extend or transfer this warranty. By applicable laws,
this warranty statement does not cover any indirect, incidental, or
consequential loss or damages of any nature, including, but not limited to,
loss or damages caused by commercial or financial activities.
To the extent the law permits, the repair or replacement of this product does
not, under any circumstances, extend the original warranty period. However,
the repaired or the replaced parts are warranted in the same manner.
NOTE: For any additional questions regarding our warranty policy, please
visit gabb.com/support, or email us at
support@gabb.com.
Copyright © 2023 Gabb Wireless Inc. | All rights reserved.
Gabb and the Gabb logos are trademarks of Gabb Wireless Inc.
No part of this publication may be duplicated, reproduced, shared, or used in
any form, regardless written or eletronically, without the prior written
consent of Gabb Wireless Inc.
Gabb Wireless Inc. reserves the rights to make changes without prior notices.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>