Clarke CAT157 1-4 Inch Mini Air Regulator Instruction Manual
- June 5, 2024
- Clarke
Table of Contents
Clarke CAT157 1-4 Inch Mini Air Regulator
INTRODUCTION
Thank you for purchasing this CLARKE product. Before attempting to use this product, please read this document thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
INSTALLATION
The regulator should ideally be connected to a fixed airline or connected to
the outlet of the compressor. An arrow, moulded under the body of the unit,
indicates the direction in which the air should flow. Use the mounting bracket
supplied whenever possible. The maximum supply pressure the unit can operate
is 145psi (10bar).
IMPORTANT: Remember that the sequence for airline component assembly is:
FILTER/REGULATOR/LUBRICATOR.
ADJUSTING THE AIR PRESSURE
To adjust the delivery air pressure, pull the regulator cap upwards and twist
clockwise to increase/anti-clockwise to decrease the outlet pressure. The
outlet pressure is displayed by the gauge. When the pressure is correct, press
the cap back to lock and retain the setting.
The unit can be isolated from the air supply by screwing down the shut off valve on the inlet side of the unit. To restore airflow, unscrew the valve no more than 3 full turns from the fully closed position.
CAUTION: AIRFLOW WILL BE RESTORED AFTER 3 FULL TURNS. NEVER UNSCREW THE VALVE ANY MORE THAN 3 FULL TURNS FROM THE FULLY CLOSED POSITION.
This product has no user-serviceable parts.
SPECIFICATION
| Weight | 0.228 kg |
|---|---|
| Length x Width x Height | 98 x 68 x 80 |
| Maximum supply pressure | 143psi (10 bar) |
| Maximum outlet pressure | 115psi (8 bar) |
| Outlet port size | 2 x 1/4” BSP |
| Gauge range | 0-230psi (0-16bar) |
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase. This guarantee is invalid if the product is
found to have been abused or tampered with in any way, or not used for the
purpose for which it was intended. Faulty goods should be returned to their
place of purchase, no product can be returned to us without prior permission.
This guarantee does not effect your statutory rights.
ENVIRONMENTAL PROTECTION POLICY
Do not dispose of airline products with general household waste at the end of
its life. This product contains valuable raw materials and should be disposed
of appropriately at a recognized disposal facility.
QUALITY PRODUCTS
AIR COMPRESSORS
From DIV to industrial, Plus air tools, spray guns and accessories.
GENERATORS
Prime duty or emergency standby for business, home and leisure.
POWER WASHERS
Hot and cold, electric and engine driven – we have what you need
WELDERS
Mig, Arc, Tig and Spot. From DIV to auto/industrial.
METALWORKING
Drills, grinders and saws for DIV and professional use.
WOODWORKING
Saws, sanders, lathes, mortisers and dust extraction.
HYDRAULICS
Cranes, body repair kits, transmission jacks for all types of workshop use.
WATER PUMPS
Submersible, electric and engine driven for DIV, agriculture and industry.
POWER TOOLS
Angle grinders, cordless drill sets, saws and sanders.
STARTERS/CHARGERS
All sizes for car and commercial use.