FIAMMA 98655Z081 Adapter Rapido Distinction Instruction Manual

June 5, 2024
FIAMMA

FIAMMA 98655Z081 Adapter Rapido Distinction

FIAMMA 98655Z081 Adapter
Rapido Distinction fig 1

ADAPTER RAPIDO DISTINCTION
Item No. 98655Z080 (400) – 98655Z081 (450) – 98655Z082 (490) – 98655Z125 (600)FIAMMA 98655Z081 Adapter Rapido Distinction fig
21

overview

FIAMMA 98655Z081 Adapter Rapido Distinction fig
3 FIAMMA 98655Z081 Adapter Rapido Distinction
fig 4

  • Check that nothing has been damaged or deformed during transport.
    In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. We recommend that the installation is carried out by qualifi ed personnel and in compliance with current local regulations.

ATTENTION: INSTALLATION ON ADAPTER
Ensure that the adapter is mounted linearly and not present curves or deformation due to the vehicle: in these cases, shim appropriately to ensure the linearity of the bracket. The installation of the awning can occur only when the adapter is perfectly aligned to the wall of the vehicle.

Important: use of SIKA 252 adhesive is essential for fi xing the bracket (brackets).FIAMMA 98655Z081 Adapter Rapido Distinction fig
5

**Attention Security

FIAMMA 98655Z081 Adapter Rapido Distinction fig
7 **

Remove this label only after fi xing the awning on the adapter.FIAMMA
98655Z081 Adapter Rapido Distinction fig 9 FIAMMA 98655Z081 Adapter Rapido Distinction fig 10

  • Please always use the security screws
  • When using the awning please follow the instructions of the product.
  • NTION Periodically check the brackets to make sure they are fi rmly attached (especially after the fi rst kilometers) make sure the bolts are not loose and that holding brackets have not shifted.

Read the following instructions and warnings carefully; failure to observe these installation and usage instructions as well as the laws for driving in the relevant country may cause severe harm or damage for which the manufacturer declines all responsibility. Before installation, ensure compatibility with the vehicle on which the product must be installed. Checking that the wall/roof/rear door is suffi ciently solid and suitable for guaranteeing the resistance of the anchoring points is always mandatory. If not, strength and compliance with the maximum load indicated in the instructions are not guaranteed and it will be necessary to reinforce it these points.

Warranty Fiamma
In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals