Petorobot B0CR9NPL36 Puck Lights User Guide
- June 16, 2024
- Petorobot
Table of Contents
B0CR9NPL36 Puck Lights
User Guide
The Lamp Body
- Functional area description. Each press +/- will change different colors.(K- White/Red/Green/Blue/flash–off)
- This product comes with a brightness memory function. The brightness you change will remain active the next time you turn on the light until you change it again.
- This product can change the brightness . You can increase/decrease the brightness by pressing the +/- button above the lamp body ,or use the +/-button on the remote control(% increase or decrease each press).
- Color Setting: You can quickly set the red, blue, green, and white light as needed, or you can pause the color you want in the flash mode.
- Brightness Select: Quickly set the light brightness %, %, % with the remote control.
- Timer presets – You can set the product to turn off in , or minutes.
- This product can work with *AAA alkaline batteries. Replace the battery when the brightness drops. To install/disassemble the battery, turn the front and rear cover of the lamp body counterclockwise by about cm to open the battery cover. Place the battery in the +/-direction of the battery slot. Close the back cover and rotate clockwise until it is marked. The installation is complete.
Remote Control
The remote controller is equipped with a CR button battery at the factory. We add a piece of transparent PVC insulation film between the contact point of the battery and the remote control, to ensure that no electricity is lost during transportation. When you use it for the first time, you need to pull it out. The distance of the remote control depends on the amount of power. If the power is sufficient, you can reach a distance of meters.Using a -degree angle for remote control.
Installation
Easily install & Remove- Included M adhesive taps for fixed install. If the battery isused up, remove the lamp body with a little effort and replace the battery to use it again.Please clean the attachment position with a cleaning cloth before affixing, so that it canbe attached more firmly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>