pTron DC5V-1A Fusion Beam BT Speaker User Guide

June 14, 2024
pTron

pTron DC5V-1A Fusion Beam BT Speaker

Important

Important: pTron ‘Fusion Beam’ speaker is set at 50% default volume. You can increase the volume through the Speaker or through the connected device.

Getting Started & Charging

  1. Unbox the Party Speakers and remove all packaging materials.
  2. Place the speakers on a flat surface.
  3. Connect the Micro USB cable to the charging port on the speaker’s backside, and connect the US Bend of the Charging cable to a Power Source such as a USB Charger or other Charging Devices with a 5 volt output.
  4. Charge the speakers fully before initial use for the best battery performance.

Bluetooth Pairing

  1. Turn on the Party Speakers by long press the power button.
  2. The speaker will enter pairing mode automatically.
  3. On your smartphone or tablet, enable Bluetooth and search for nearby devices.
  4. When you see “pTron BT speaker” in the list of available devices, select it to pair.
  5. Once the speaker is connected with the BT device it will respond with a voice prompt, “Connected”

Note: If no device is connected within 5 minutes after turning on the speaker, the Speaker will automatically turn off.

Basic Operation

  1. Power on/off: Turn on/off the Party Speakers by long press the power button.
  2. Volume control: Long press the “+” button to increase the sound and long press the “-” to decrease the sound.
  3. Play/Pause: Press the play/pause button to start or pause audio playback.
  4. Next/Previous track: Use the (single press) “+” & “-” buttons to move to the next & previous track when playing music.
  5. Mode Button : Press the power button to change the speaker mode.

Note: The speaker will automatically detect the TF card, USB drive, or auxiliary cable after inserting these devices.

Wired Connection

  1. To use a wired connection, connect one end of the 3.5mm audio cable to the AUX IN port on the back of the speakers.
  2. Connect the other end of the audio cable to the headphone jack of your audio source (phone, tablet, computer, etc.).

TWS function

  1. This speaker comes with auto-detecting TWS technology, so when two speakers turn on within proximal range, they will automatically connect to each other

Important: Please use this speaker within a 10 metre wireless range from the connected device

Safety Precautions

  • Please keep this device away from extreme heat, liquids, humidity or corrosive environment.

  • Please don’t over-charge the product as it will decrease the service life of battery.

  • Using incompatible USB cable or high voltage chargers can damage the product & void the product warranty. We strongly recommend using a good quality DC5V-1A chargers & the USB cable included in the package.

  • This product or the Bluetooth function should not be used during charging.
    Don’t jam the ports such as charger port, LED port, etc.

  • It is recommended to utilize the product below the maximum volume in order to protect your hearing.

  • Please don’t open/temper the product or product’s battery.

  • Please keep the product out of children’s reach.

  • Dispose the product responsibly and adhere to your local authority guidelines.

Packing Box Content

1 Speaker, 1 Micro USB charging cable, 1 Aux cable , 1 Belt, 1 User Manual/Warranty QR Card

What is Covered in Warranty?

Customer Care Details:

Mail: support@ptron.in
Tel: 040 – 67138888
Service Centers List: https://ptron.in/pages/ptron-service-centers

Disclaimer: The colour and specifications shown in or mentioned in the user manual may differ from the actual product. Images shown are for representation purposes only. Other product logos and company names mentioned here in may be trademarks or trade names of their respective owners.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals