Plantronics W8200B1 Wireless DECT base with Bluetooth User Manual
- June 5, 2024
- Plantronics
Table of Contents
Plantronics W8200B1 Wireless DECT base with Bluetooth User Manual
Free RTOS software
Permission is hereby granted, free of charge, to any person obtaining a copy
of this Free RTOS software and associated documentation files (the
“Software”), to deal in the Software without restriction, including without
limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to permit
persons to whom the Software is furnished to do so, subject to the following
conditions: The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software. THE SOFTWARE
IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Regulatory Compliance Information
Caution – Important DECT information. DECT products should never be used outside the region in which they were originally purchased and intended to be used.
STATEMENT FOR: Energy efficiency – EuP framework Directive 2005/32/EC and
implementing
measure 1275/2008 incorporating commission regulation 801/2013:
Once the headset battery is fully charged the product enters a networked standby mode. The period of time taken to enter this mode depends on how long the battery takes to fully charge. In networked standby mode the product consumes 1.2 Watts. The wireless network port(s) of this product are designed to be always active.
United States/Puerto Rico
FCC Regulatory Information This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Declaration Of Conformity
We Plantronics Inc, 345 Encinal Street Santa Cruz, California, 95060 USA
800-544-4660 declare under our sole
responsibility that the product MODEL Savi 8240 Office and Savi 8245 Office
complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation
Exposure to RF Radiation
The internal wireless radio operates within the guidelines found in radio
frequency safety standards and recommendations, which reflect the consensus of
the scientific community. Independent studies have shown that the internal
wireless radio is safe for use by consumers. Visit poly.com for more
information. In order to comply with FCC and IC RF Exposure requirements, the
base must be installed and operated such that a minimum separation distance of
20 cm is maintained between the base and all persons during normal operation.
NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to operate the equipment. Australia/New Zealand.
Part 68
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On this equipment is a label that contains, among other
information, a product identifier in the format US:AAAEQ##TXXXX. If requested,
this number must be provided to the telephone company. A plug and jack used to
connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the
ACTA. A compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular jack that is
also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined byt the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US: AAAEQ##TXXXX. The digits represented by ## are the REN without the decimal point (e.g., 03 is an REN of 0.3). For earlier products, the REN is separately shown on the label. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make the necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment, for repair or warranty information, please contact Plantronics, Inc in the U.S.A. at 800) 544-4660 x5538. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. Connection to party line service is subject to state tariffs. Contact the state public utility commissions, public service commission or corporations commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. This equipment does not contain any user serviceable components.
Canada
CAN ICES-3 (B)/NMB-3(B)
Innovation, Science and Economic Development This device contains licence-
exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to
the flowing two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Canada, Regulatory Information
The Ringer Equivalence Number is an indication of the maximum number of
devices allowed to be connected to a telephone interface. The termination on
an interface may consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices
does not exceed five.
Specific Absorption Rate (SAR/DAS)
In accordance with France Specific Absorption Rate disclosure, this product
SAR is: DAS/SAR < 0.3 W/Kg.
A crossed-out wheelie bin symbol denotes that waste electrical and electronic
equipment and batteries must not be disposed of as unsorted municipal waste,
but collected separately. For more detailed information, please go to
poly.com.
© 2021 Poly. All trademarks are the property of their respective owners.
Manufactured by Plantronics, Inc.
209474-07 Rev D 10.21
Recyclable where facilities exist
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>