PURE Evoke Home All-in-One Music System for Home with DAB+ /FM Radio User Guide

PURE Evoke Home All-in-One Music System for Home with DAB+ /FM Radio

Controls

Preset Area (Evoke Spot & Play)
Note: Evoke Home has button 3 & 4 in the CD area and instead two more additional preset buttons under the volume dial.

Display Area

CD Area (Evoke Home only)

Foldaway Display

The display can be either flipped up to access the radio’s settings or flipped down to achieve a discreet look. When the display is facing down, it will turn itself automatically off.

Note: If you try to move the display beyond its defined end point in either direction, you can cause serious damage to the display joint.

Controls – Preset Area

1. VOLUME DIAL

2.  Power
   Press to turn on.
   Long press to turn the radio off.

3. Volume
   Rotate the dial to adjust the volume up or down during playback.

4. Mute/Play/Pause
   Podcast, Spotify Connect, Bluetooth: Press the dial to pause/play the music DAB, FM: Press the dial to mute the music.

5.  Snooze
   Press the dial to snooze when an alarm is sounding. Long-press the dial to cancel when an alarm is sounding.

6. PRESETS Long press a preset button to save your favourite station as a preset. Short press a preset button to recall either preset.

7. SKIP BACK (At Evoke Home in “CD Area”)

   • Spotify Connect: Press to select the previous track.
   • Bluetooth: Press to select the previous track.
   • DAB: Press to tune to previous station.
   • FM: Press to adjust the frequency in increments. Long press to scan for the previous station.
   • Podcasts: Press to select the previous episode.
   • CD: Press to select the previous track.
   • Press and hold to rewind the current track.

8. SKIP FORWARD (At Evoke Home in “CD Area”)

   • Spotify Connect: Press to select the next track. Bluetooth: Press to select the next track.
   • DAB: Press to tune to next station
   • FM: Press to adjust the frequency in increments. Long press to scan for the next station.
   • Podcasts: Press to select the next episode.
   • CD: Press to select the next track.
   • Press and hold to fast-forward the current track.

Display Area

1. SOURCE
   Press to switch between the different sources; DAB Radio, FM Radio, Internet Radio, Spotify, Podcasts, Bluetooth® Audio, CD & AUX (Evoke Home only).

2. BLUETOOTH
   Press once to directly switch to the Bluetooth source.
   Long-press the Bluetooth button to pair a new Bluetooth capable device.

3. FAVOURITE
   Depending on the source, you can save up to 40 stations to the preset list by long pressing the Favourite button.
   To recall stations from the preset list, press the Favourite button and select the station you want to play. The available presets are as follows:

   • DAB 10
   • FM 10
   • Internet Radio/Podcast 40
     Note: Internet Radio and Podcast share a joint preset list

4. HOME / SELECT
   Press to access the menu for the current source.
   Once in the menu, use this button to select the currently displayed menu entry.
   Use the Left/Right/Up/Down buttons from the Navigation Cross to navigate in the menu.

5. LEFT / BACK
   In a menu, press to return to the previous menu screen or exit the menu completely.

6. RIGHT / INFO
   Long-press the Right button to view more information about the station or track playing.
   Long-press again to cycle through further information screens then return to the normal playing screen.

7. UP
   DAB: Press to access the station list.
   Podcasts: Press to access the podcast list.
   FM: Short press to adjust the frequency in increments upwards.
   Long press to scan for the next station.
   Internet Radio: Press to access the station list.

8. 12. DOWN
   DAB: Press to access the station list.
   Podcasts: Press to access the podcast list.
   FM: Short press to adjust the frequency in increments downwards. Long press to scan for the previous station.
   Internet Radio: Press to access the station list.

Controls – CD Area (Evoke Home only)

1. STOP
   Press to stop playback when playing from CD.

2. PLAY / PAUSE
   Press to Play & Pause when playing from Internet Radio, Podcast, Bluetooth, Spotify Connect or CD.

3. EJECT
   Press to eject a CD from the CD slot.

Light Ring

The light ring under the volume dial can indicate different states of the radio.

• On – Constantly illuminated, radio is turned on
• Blink – Radio successfully received a command (through buttons of the preset area or remote control)
• Repeated flashing – Radio is in BT pairing mode
• Pulsing – Radio is either muted or music is paused/stopped
• Off – Radio is currently in Standby/off or light ring brightness has been set to Off

To see how to adjust the brightness of the light ring, check the system settings.

Remote Control (Evoke Home only)

Note: The remote control runs on a button battery of the type CR2025.

1. POWER / STANDBY
   Press to turn on.
   Press to turn the radio to standby

2. SHUFFLE
   Press to enable and disable track shuffling.

3.  MUTE
   Press to mute the music. Press again to unmute.

4.  VOLUME UP
   Press to increase the volume by one step during playback.

5.  VOLUME DOWN
   Press to decrease the volume by one step during playback.

6.  PLAY / PAUSE / SELECT
   Press to Play & Pause when playing from Podcast, Bluetooth, Spotify Connect or CD. Once in the menu, use this button to select the currently displayed menu entry.

7. PREVIOUS / BACK
   Spotify Connect: Press to select the previous track.
   Bluetooth: Press to select the previous track.
   DAB: Press to tune to previous station.
   FM: Press to adjust the frequency in increments.
   Long press to scan for the previous station.
   Podcasts: Press to select the previous episode.
   CD: Press to select the next track.
   Press and hold to fast-forward the current track.
   In a menu, press to return to the previous menu screen or exit the menu completely.

8. NEXT
   Spotify Connect. Press to select the next track. Bluetooth: Press to select the next track.
   DAB: Press to tune to next station.
   FM: Press to adjust the frequency in increments. Long press to scan for the next station.
   Podcasts: Press to select the next episode.
   CD: Press to select the next track.
   Press and hold to fast-forward the current track.

9. SOURCE
   Press to switch between the different sources; DAB Radio, FM Radio, Internet Radio, CD, Spotify, Podcasts, Bluetooth® Audio & AUX.

10.  BLUETOOTH
    Press once to directly switch to the Bluetooth source.
    Long-press the Bluetooth button to pair a new Bluetooth capable device.

11. MENU
    Press to access the menu for the current source
    Use the Volume Up/Down and Left/Right to navigate in the menu.

12. PRESETS
    Long press a preset button to save your favourite station as a preset. Short press a preset button to recall either preset.

Reset (Evoke Play only)

On the back of the product, you can locate the pinhole reset switch, which is only available in Evoke Play. It can be pressed with a paperclip or something similar.
It allows to temporarily cut the power and trigger a full reboot of the product, without having to remove the ChargePAK.

Display

The screen shows various menus, dialogues and displays as described below. There are basically five types of screen:

• Standby (clock)
• Now playing
• Dialogue
• Information Menu

The Standby screen shows the time, date and any active alarm times.
Now playing screens show information about the audio source and track now playing, where available. Dialogue screens are shown to allow the user to change settings.
The Information screens give specific messages for a few seconds, then change automatically to another screen.

Menus

• Your Evoke has basically three types of menu. Use the Navigation Arrows under the display to step through and select options.
• Each source has its own menu, with options specific to that mode. See above for the Digital Radio menu as an example.
• System settings >
• The ‘>’ indicates options leading to further menus.
• The System settings menu allows access to system settings and information such as time, language and software update.
• Menus with more options than will fit on one screen have a “>” on the right. Some menus, for example the System settings menu, have several submenus.

Setting up

Your Evoke is easy to use. To play DAB Radio. FM Radio. Internet Radio. Spotify. Podcasts. Bluetooth® Audio. CD & AUX. (Evoke Home only).
All you need is a power source or an optional battery pack (Evoke Play only and sold separately).

1.  Connect the correct pin with the power supply (Evoke Spot & Play only).
2.  Plug in the power supply into a power outlet.
3.  Connect the cable to your Evoke.
4.  Move the telescopic antenna upwards.
5.  Extend the telescopic antenna.
6. Open up the foldaway display.
7. Press the volume dial to turn on your Evoke.

Setup wizard

When your Evoke is turned on for the first time, it runs through a setup wizard to configure settings for date/time and network. Once this has finished, the system is ready to use in most modes.

Note: To change these settings later, select Menu >System settings > and select the required settings option(s). To run the setup wizard again, select Menu > System settings > Setup wizard.
The Network settings can be reset later by manually running the Network wizard, select Menu > System settings > Network >Network wizard .
Select Yes to start the setup wizard. If you choose No, a second screen asks if you would like to run the wizard next time your Evoke is started; select Yes or No. The system then starts without configuring time/date and network settings and enters the Main Menu.
Note: If power is removed while the wizard is in progress, the wizard will run again next time your Evoke is started.

Network

Your Evoke is compatible with all common network protocols and encryption methods, including Wi-Fi Protected Setup (WPS).
To connect your Evoke to your network, you need a Wi-Fi wireless router, together with password key if set. If the network is open (non-encrypted), your Evoke connects and no further details are required; see Completion below.

Password protected network

To enter the network’s key (password), use the Navigation Arrows to highlight the next relevant character and press to select each character in turn.
Backspace, OK and Cancel are included to the right of the password screen. These can be accessed just using the Navigation Arrows.

WPS setup

WPS encrypted networks are identified by ‘[WPS]’ at the start of the Network name, and have two methods of connection. Select one and follow the prompts. When using the network wizard an additional option to Skip WPS is available.
Select one and follow the prompts:

• Push Button >
• Your Evoke prompts you to press the connect button on the router. Then press the select control.
• Pin > (code number)
• Your Evoke generates an 8-digit code number which you enter into the wireless router/access point.
• Skip WPS >

Enter key as for a standard encrypted network, above. For more information on setting up a WPS encrypted network, see your WPS router’s instructions.

On completion

Your Evoke connects to the selected network.
If connecting fails, your Evoke returns to a previous screen to try again. To exit the process use the Back button.
Note: Your Evoke remembers the last four wireless networks it has connected to, and automatically tries to connect to whichever one of them it can find. You can see the list of registered networks through Menu > System settings

Network > Network profile >From here you can delete unwanted networks by Select then confirming delete Yes.
There are also other options for viewing and manually altering network settings from Menu > System settings > Network.
Users experienced with networking may find these options useful for diagnosing and fixing network problems.

Sources

Internet Radio & Podcast
Your Evoke can play thousands of radio stations and podcasts from around the world through broadband Internet connection.
When you select Internet radio mode, your Evoke connects to the Internet radio portal to get a list of stations, organized into different categories like Country, Most popular and Genre. Once you select a station, your Evoke connects directly to that station.
To enter Internet Radio mode, press Source, then navigate to and select Internet Radio. Note: The station list menu is provided from the Internet radio portal, so it is only accessible when your Evoke is connected to the Internet. Station lists and submenus may change from time to time.

Station list
The Station list is organized into various categories and search facilities:

• Country
  This menu item is localized for each country, for example, ‘UK’.
  Selecting ‘UK’ presents a sub-menu to search for stations using a variety of categories, for example, local stations, BBC stations, Genres or stations from a specific city.
  Choose the required category and either a further list of sub categories is shown, or (if there are no further sub-categories) the available stations for the chosen category are listed.

• Last listened
  When Internet radio mode restarts, the last-listened station is selected. To select another recently used station, select Menu > Last listened then one of the stations listed. Most recent stations appear at the top of the list

• Search
  You can also search through Internet broadcasts for stations with particular keywords in their title. To search, select Menu > Station List > Search . Enter a keyword by selecting characters in turn, then OK. The search entry screens are similar in operation to the Wi-Fi passphrase entry screen.

• Location
  To select an Internet broadcast from a particular location, select Menu > Station List > Location >. Select a continent from the menu and a list of countries available is presented, select a country and the available internet radio stations are presented. Choose a radio station from the list to tune to that station.

• Popular
  Presents a list of the most popular internet stations from around the world.

• Discover
  Discover allows you to select from a list of stations defined by either their origin (Country), Genre (style of music) or language. Navigate through the category options; once you have made your selection a screen confirms your selected category and the number of stations within that category. To see the list, select the option showing the number of available stations.

Now playing information
While the stream is playing, the screen shows its name and description. If artist and track information is available, this is also shown. To view further information, press Info.
Each time you press Info, another set of information is displayed, cycling through the following details:

• Slogan (default; where available)
• Language/Location
• Codec and sampling rate
• Playback buffer
• Today’ Date.

DAB

To enter DAB mode, press Source and tap Source until DAB radio is highlighted. Press Select to activate. You can also use the Navigation Arrows to select your source.

Scanning for stations

The first time you use your Evoke, or if the station list is empty, the radio automatically performs a full scan to see what stations are available. You may also need to start a scan manually to update the list of stations for one of the following reasons:

• New stations may become available from time to time.
• If reception was not good for the original scan (for example the antenna was not up), this may result in an empty or incomplete list of available stations.
• If you have poor reception of some stations causing the audio to break up, you may wish to list only stations with good signal strength.

To do a scan Select Menu > Scan.
Once a scan is complete, the radio returns to playing the previously-selected station or first station on the station list.
To remove stations that are listed but unavailable Select Menu > Prune Invalid.

Manual tune

As well as the normal method of scanning, you can also manually tune to a particular channel / frequency. This can be useful for adjusting your antenna to achieve the best possible reception and scanning a particular channel to update the station list.
To manually tune Press Menu > Manual tune then use the select control button to display a particular channel/frequency, press Select to tune to that channel/frequency.
The display shows a live indication of the received signal strength on the selected frequency.
Adjustments to your antenna will be manifested in the received signal strength displayed.
Note: The division in the signal strength bar indicates the audio quality threshold – if the signal strength, as indicated by the solid rectangles, falls below this threshold the audio quality will deteriorate.
When a channel/frequency is selected your Evoke also scans for any DAB stations on the selected frequency and updates the station list with any new stations found. To listen to any stations found return to the Now playing screen.

Now playing information

While a station is playing, the screen shows its name and DLS (Dynamic Label Segment) information broadcast by the station such as programme name, track title and contact details.

Slideshow
The normal now playing screen shows a thumbnail of the currently available slideshow image. (If no slideshow image is available a default DAB thumbnail image is displayed).
To view further information long press the Right/Info button.
Each time you press Info, the next set of information is displayed, cycling through: DLS text, DL Plus information (this is only displayed if broadcast by the station), programme type, ensemble name, channel number/ frequency, signal strength, Bit rate and date.

Other settings

Dynamic range compression (DRC)
This function reduces the difference between the loudest and quietest audio being broadcast.Effectively, this makes quiet sounds comparatively louder, and loud sounds quieter.
Select Menu > DRC > The options available are: DRC high | low | off.

FM

To enter FM mode: press Source and tap Source until FM radio is highlighted. Press Select to activate. You can also use the Navigation Arrows to select your source

Selecting stations

The first time you select FM radio, your Evoke is set to the lowest frequency in the FM band. On subsequent selections the last used frequency/station is displayed.
To scan for a station in FM mode press and hold the skip forward, skip back button or the Navigation Arrows up and down arrows. Your Evoke scans through the FM band frequencies, showing the current frequency on the screen display.
Alternatively, you can short press the skip forward, skip forward, skip back button or the Navigation Arrows up and down arrows to tune in 50 kHz steps.

Now playing information

While FM radio is playing, the screen shows its frequency, or if RDS information is available, station name and any further RadioText’ information. If no information is available, just the frequency and a No RadioText message is shown.
To view further information about the broadcast long press the Right/Info button. Each time you long press the Right/Info button, the next set of information is displayed, cycling through:

• RDS radio text
• Programme type
• Frequency
• Date

Settings

Scan settings

By default, FM scans stop only at stations with good signal strength. To change the scan settings, to stop at all stations select Menu > Scan setting to display the option of scanning for ‘Strong stations only?’ and then select ‘No’.
This may include poor quality audio from weak stations.

Bluetooth

To enter Bluetooth mode: Press source, then navigate to and select ‘Bluetooth Audio’ or short press the Bluetooth button.

BT Pairing
To connect a Bluetooth capable device use your Bluetooth capable smart device to pair and connect with your Evoke. Long-press the Bluetooth button to bring your Evoke to the ‘pairing’ state.

Display information
While BT audio is playing, the screen shows the Track name at the top of the screen and details of Artist & Album together with a progress bar. To view different information, long-press the Right/Info button. Each time you press the Right/Info button, another set of information is displayed, cycling through the following details:

• Artist
• Album
• Codec and sampling rate

Spotify Connect

Streaming from Spotify

Press Source and tap Source until Spotify Connect is highlighted, press Select to activate. You can also remotely activate Spotify Connect using the Spotify app on your smart device.
Spotify Connect lets you play Spotify through your home speakers or TV, using the Spotify app as a remote.
You’ll need a Spotify Premium account to use Spotify Connect.
If you don’t have it, just go to http://www.spotify.com/freetrial for your free trial.

1.  Connect your device to the same Wi-Fi network as your phone, tablet or PC running the Spotify app.
2.  Open the Spotify app and play any song.
3.  Tap the song image in the bottom left of the screen.
4.  T ap Cthe onnect icon.
5.  Pick your Evoke from the list.

For more information on how to set up and use Spotify Connect please visit www.spotify.com/connect.

Licenses

The Spotify Software is subject to third party licenses found here:
http://www.spotify.com/connect/third-party-licenses
For more information on how to setup and use Spotify Connect please visit www.spotify.com/connect 

(CD Evoke Home only)
To enter CD mode: press Source and tap Source until CD is highlighted. Press Select to activate. You can also use the Navigation Arrows to select your source.
The following CD formats are compatible: MP3, WAV, CD-R, CD-RW, CD-DA, WMA.

Inserting a CD
Switch to CD mode and insert your CD, label facing towards you.
When you first insert a CD, your Evoke displays ‘Loading’ for a few seconds while the CD loads. After a few seconds, your CD will start to play automatically.
Note: A CD can only be inserted when your Evoke is in CD mode.

Playing a track
During audio CD playback, your Evoke’s display shows the track number and the amount of time the track has been playing. Evoke will also display the file name if this is available.

Repeating tracks
You can use the ‘Repeat’ setting on your Evoke to repeat the track that is currently playing or the entire CD. To change the ‘Repeat’ setting press the Menu button and navigate to and press Select ‘Repeat’.
You can select from one of the following repeat options:

• Repeat one: Select this option if you want to repeat the track that is currently playing.
• Repeat all: Select this option if you want to repeat the entire CD.
• Normal: Select this option if you don’t want to repeat any tracks or the entire CD.

Shuffling tracks
You can use the ‘Shuffle’ setting on your Evoke to listen to shuffle the tracks on your CD. To change the ‘Shuffle’ setting either use the remote control or press the Menu button and navigate to and press Select ‘Shuffle’.

Shuffle: Select this option if you want to enable track shuffling. Normal: Select this option if you want to disable track shuffling.

Ejecting a CD
Press the eject button on the top of your Evoke in any mode to eject a CD. Wait until Evoke displays ‘Eject’ and remove the CD.

AUX (Evoke Home only)

Connecting a device with an auxiliary cable
You can use an auxiliary cable to connect a device, such as an MP3 player, to your Evoke. You can then enjoy music saved on the device through your Evoke.
To connect a device with an auxiliary cable:

1.  Press Source and tap Source until Auxiliary input is highlighted, press Select to activate.
2.  Insert an auxiliary cable into the Aux in socket on the back of your Evoke.
3.  Insert the other end of the auxiliary cable into the device you want to connect.
   Your Evoke is now ready to play music from the connected device.

Alarms snooze and sleep

As well as a clock/calendar, there are two versatile wake-up alarms with snooze facility, and a sleep function to turn the system off after a set period of time. The alarm sound for each alarm can use a buzzer or a selection from the audio sources.

To set the clock/calendar
The settings for the internal clock are all accessible via the Systems Setting menu – Time/Date The Alarm and Sleep timer options are in the Main Menu.
Snooze duration can be changed whilst an alarm is triggering by pushing Select.

To set alarms
Note: Alarms will only function when your Evoke unit is On or in Standby mode. An active alarm is indicated by its icon in the bottom line of the display.

Enter the Alarm option through the Main Menu and use the Navigation Arrows to select the required Alarm 1 or 2.
To exit alarm setting mode, press the Left/Back (alternatively, the Alarm display will timeout and automatically return to the Now Playing screen after a short time). Any changes to the alarm settings are lost if you let the menu time out.
The alarm setup prompts you for the following parameters. Select a value for each parameter in turn turning the select control button and press Select to confirm and move on to the next parameter.

Parameters
Enable – Off | On
Frequency – Daily | Once | Weekends | Weekdays
Choose the days on which the alarm is active.
Note: if you choose ‘Once’, you are prompted to enter the required date. Time – hours and minutes
Mode – Buzzer | Internet radio | DAB | FM | CD (Evoke Home only) If Internet Radio, DAB or FM radio is chosen as the audio source a preset menu is displayed which allows you to select the station.
Volume – use the navigation arrows to set the required alarm volume.
This is the volume the alarm will build up to. (Initially the alarm sounds at a low volume and gradually gets louder to the set volume).

In all listening modes active alarms are indicated by displaying the relevant Alarm 1 and/or Alarm 2 icons.
At the set time, the alarm will sound, quietly at first, then gradually building up to the set volume. When an alarm sounds, the icon in the display flashes.
Long press the volume dial to fully cancel a sounding alarm and switch the radio to standby.

Snooze
To temporarily silence a sounding alarm for 5min, press the volume dial once.
You can change the snooze period by repeatedly pressing the select button. Snooze periods are 5, 10, 15 and 30 minutes.
The radio returns to standby for the set time period with a snooze countdown displayed. When the countdown reaches 0 (zero) the alarm is triggered again..

Sleep
To set the sleep timer while the radio is playing press menu and navigate to Main Menu > Sleep timer. You can choose the sleep delay time in minutes from: Sleep Off | 15 |30 | 45 | 60.
Once you select a sleep delay period, the display returns to the Now playing screen displaying a Crescent moon icon and the remaining time, in minutes, before the sleep time expires.
After the sleep delay period the radio switches to standby mode.

System Settings

The System Settings allow you to tailor your Evoke with a variety of options to suit you.
To access system settings from any mode Select Menu >System Settings >, then choose from the various options as described in the menu as below.

Menu Entries
The System Setting Menu options are:

• Equalizer

• Streaming audio quality
  Network

• Time/Date

• Inactive standby
  Language

• Factory reset Software update
  Setup wizard

• Info

• Backlight

• Light Ring

To navigate through the menus
The following controls are used to move about the menu tree to choose and select the required settings:

Home/Select – This enters the menu of the currently playing source. Once in the menu, this selects the currently displayed option. If the option has a further sub-menu the first option of the sub-menu is displayed. If the option is a setting value, the displayed value is selected and either the next setting is highlighted or, if there are no further settings, the display returns to the parent menu for that setting.

Equaliser

With this option the sound can be adjusted to personal preferences.
My EQ profile setup

This option allows you to set a bias in the treble and bass audio frequencies. Values can be set between -7 (Minus 7) and +7 (plus 7).
Treble – (Use the left/right arrow buttons to choose a bias value between-7 and +7) Bass – (Use the left/right arrow button to choose a bias value between -7 and +7)

Time/Date

The time and date can be updated manually or automatically. With auto-update, the time and date are automatically broadcast over Internet, DAB and FM radio (when available).
You can also select the display format for the time and date.
The Time menu contains the following options:

• Auto update – Update from DAB | Update from FM | Update from Network | No Update Set format – 12 | 24
• Set timezone – UTC +/- hours
• Daylight savings – On/Off

Set time/date

This option is for manually setting the time and date displayed. The date displays as DD- MM-YYYY, with the first value, DD, active (flashing). Adjust each value using the select control button and press Select to confirm. The next value then becomes active and flashes. The time values follow and are set in the same way.

Auto-update

Auto-update works with data sent over DAB, FM or network. The clock is only updated when in a corresponding mode, so it is best to select a mode you use regularly.
DAB and FM use time signals broadcast with radio transmissions.
Network uses a time signal sent from the Internet radio portal when in any network- connected mode.

1.  Select Update from DAB, Update from FM, Update from Network or No update.
2.  If you are updating from the network, set your time zone.
3.  If your country uses daylight saving, the automatically updated time from the network may be wrong by one hour. When daylight savings are in effect (during the summer), turn on the Daylight savings option to rectify this.

Note that if you are updating the time from DAB or FM, the Daylight savings option has no effect on the clock’s time.
Your Evoke will auto-update from the selected Mode when time information is available.

Inactive Standby
With this option, the radio will go into standby automatically, when there was no interaction with the radio within a certain time span. This should avoid the radio playing endlessly, when you leave the house, while it’s still playing.
Timeout – Off | 2 hours | 4 hours | 5 hours | 6 hours

Language
The default language is English. To change, select Menu > System settings > Language >then select your language.

Factory reset
A factory reset clears all user defined settings, replacing them with the original default values, so time/date,preferences/ settings and DAB station list are all lost.
If you select Factory reset, you are asked to confirm by selecting “Yes”.

Backlight
You Evoke has a backlight with three brightness settings, and adjustable timeout (this is the time delay, in seconds, after which the display switches to the Dim level when in Standby).
There are three settings:

• Timeout – Light On | 10 | 20 | 30 | 45 | 60 | 90 | 120 | 180 sec
• On level – High | Mid | Low
• Dim level – Mid | Low

Note: the dim option only affects the brightness level of your Evoke being in the Standby state.

Light Ring
The brightness of the Light Ring under the volume dial can be adjusted. There are three settings to choose from:
Brightness – High | Low | Off

Usi4ng a ChargePAK (Evoke Play only)

A ChargePAK is a rechargeable battery pack that allows you to listen to your music anywhere.
When your Evoke Play is connected to a power outlet, it charges the ChargePAK.
You can then disconnect your Evoke Play from the power any time and take your music with you.
It can be purchased separately as an accessory. Visit www.pure.com for more information.
Note: Your Evoke Play is only compatible with a Pure ChargePAK Evoke Play. Do not use any other batteries or ChargePAK models with your Evoke Play.

Inserting a ChargePAK If the ChargePAK is new or has not been used for a long time, we recommend yo char e it for at least 24 hours.
Note: When the ChargePAK is charging, it is normal for it to get warm. The capacity of the ChargePAK may decrease over time.

References

• Spotify - Web Player: Music for everyone
• Spotify - Connect
• Spotify - Connect
• Third Party Licenses | Spotify for Developers
• Page not found - Spotify

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>