PARKSIDE PKLLP 360 B2 Cordless Cross Line Laser 4V Instruction Manual

PKLLP 360 B2 Cordless Cross Line Laser 4V
Instruction Manual

CORDLESS CROSS LINE LASER 4V
Operation and safety notes

|
---|---

Warnings and symbols used

The following warnings are used in this user manual and on the packaging:
DANGER! This symbol in combination with the signal word “Danger” marks a high-risk hazard that if not prevented could result in death or serious injury .
WARNING! This symbol in combination with the signal word “Warning” marks a medium-risk hazard that if not prevented could result in death or serious injury.
CAUTION! This symbol in combination with the signal word “Caution” marks a low-risk hazard that if not prevented could result in minor or moderate injury.
ATTENTION! This symbol with the signal word “Attention” indicates possible property damage.
NOTE: This symbol in combination with “Note” provides additional useful information.
This symbol means that the operating instructions must be observed when using the product.
Risk of explosion!
This mandatory sign indicates wearing suitable protective gloves! Follow the instructions of this warning to avoid hand injuries caused by objects or contact with hot or chemical materials.
Protect yourself from laser radiation!
Do not stare into the laser beam!
Direct current/voltage
USB connection
** Use in dry indoor rooms only.
CE mark indicates conformity with relevant EU directives applicable for this product.
CORDLESS CROSS LINE LASER 4V**

Introduction

We congratulate you on the purchase of your new product. You have chosen a high-quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.
Intended use
This product is suitable for projecting vertical and horizontal lines. The laser lines can be used both individually and together. Do not use this product for any other purpose. This product is only intended for normal indoor use. This product is only intended for private household use, not for commercial purposes. The manufacturer accepts no liability for damages caused by improper use.
Scope of delivery
After unpacking the product, check if the delivery is complete and if all parts are in good condition. Remove all packaging materials before use. Please contact customer service if parts are missing or damaged. 1x Cordless cross line laser 1x Tripod 1x USB-C charging cable 1x Instruction manual

Description of parts
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the product.

(Fig. A) 1] 360° laser
2] Magnets
3] Charging socket
4] Butterfly screw
5] Handwheel bolt
6] Lever
7] Tripod legs
8] Snap fasteners
9] Locking ring
10] Crank handle
(Fig. B) 21] Internal thread| 11] Locking ring
12] Adjusting screw
13] Dragonfly (bubble vial)
14] Levelling slide switch
15] Charge indicator
16] On/off button
17] Leveller light
18] Vertical laser
19] Tripod mount
20] USB-C charging cable
22] Tripod screw
---|---

Technical data

Working range:
Weight (without a tripod):
Operating voltage Umax:
Nominal capacity:
Charging voltage UIN:
Charging current:
Self-levelling range:
Levelling accuracy:
Laser wavelength:
Laser class:
Levelling time:| 20 m*
approx. 440 g
4 V
2.6 Ah
5 V
1.7 A
± 3°
± 0 .4 mm/m
510–530 nm
2
approx . 4 seconds
---|---

• The working range may be restricted by environmental conditions (e .g . bright light) .

Safety instructions

BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS!
In the case of damage resulting from non-compliance with these operating instructions, the warranty claim becomes invalid!
No liability is accepted for consequential damage! In the case of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions, no liability is accepted!
Children and persons with disabilities

WARNING! RISK OF LOSS OF LIFE OR ACCIDENTS TO INFANTS AND CHILDREN!
Never leave children unsupervised with the packaging material. The packaging material represents the danger of suffocation. Children frequently underestimate the dangers. Always keep children away from the packaging material.

• The product is to be used by adults only. Children under the age of 16 may not use the product except under supervision.
• Keep children away from the product.

General notes

• Observe the information on operation, cleaning, storage and disposal in the operating instructions.
• Check the product each time before using it. If damaged, have the product repaired. Do not use the product if damaged.
• Turn off the product when not in use. Do not leave the product unsupervised.
• Keep the product away from medical devices, magnetic data storage media and magnetically sensitive devices.

Handling the laser
CAUTION! Laser beam ­ Do not look into the beam! Laser class 2 . Do not aim the laser beam at people. Markings and warnings are located on the top and bottom of the product.
Safety instructions for batteries/rechargeable batteries
DANGER TO LIFE! Keep batteries/rechargeable batteries out of reach of children. If accidentally swallowed seek immediate medical attention.
DANGER OF EXPLOSION! Never recharge non-rechargeable batteries. Do not short-circuit batteries/rechargeable batteries and/or open them. Overheating, fire or bursting can be the result.

• Never throw batteries/rechargeable batteries into fire or water.
• Do not exert mechanical loads to batteries/rechargeable batteries.

Risk of leakage of batteries/rechargeable batteries
Avoid extreme environmental conditions and temperatures, which could affect batteries/rechargeable batteries, e .g . radiators / direct sunlight.
If batteries/rechargeable batteries have leaked, avoid contact with skin, eyes and mucous membranes with the chemicals! Flush immediately the affected areas with fresh water and seek medical attention!
WEAR PROTECTIVE GLOVES!
Leaked or damaged batteries/rechargeable batteries can cause burns on contact with the skin. Wear suitable protective gloves at all times if such an event occurs.
This product has a built-in rechargeable battery which cannot be replaced by the user. The removal or replacement of the rechargeable battery may only be carried out by the manufacturer or his customer service or by a similarly qualified person in order to avoid hazards . When disposing of the product, it should be noted that this product contains a rechargeable battery.

Before first use
Remove the packaging. Check if all parts are complete. Charge the rechargeable battery (see “Charging the rechargeable battery”) .

Operation

Charging the rechargeable battery
NOTE: The rechargeable battery is not replaceable. If you have any problems with the battery, please contact the service centre.

1. Plug the USB-C charging cable [20] into the charging socket [3] .

2. Connect the USB-C charging cable [20] to a USB port.
   Charge indicator [15]…………………………Meaning
   Red…………………………. The rechargeable battery is charging.
   Green………………………. The rechargeable battery is fully charged.

3. Once charging is complete, first remove the USB-C charging cable [20] from the USB port.

4. Remove the USB-C charging cable [20] from the product.

NOTE: The product can be used whilst charging. It is normal for the product to warm up slightly whilst charging. During the charging process, you may not be able to work with the product if the battery is almost or completely empty. This depends on the charger used.

Switching on/off
CAUTION! Laser beam Do not look into the beam [1] [18]! Turn your head away or close your eyes to prevent looking into the laser beam. Risk of eye injury!
Switching on: Briefly press the on/off button [16] .
Switching off: Press and hold the on/off button [16] for 2 seconds.
Using horizontal and vertical laser lines
After switching on, the 360° laser line [1] and the vertical laser line [18] are activated. Activate the 360° laser line [1] only: Briefly press the on/off button [16] . Activate the vertical laser line [18] only: Briefly press the on/off button [16].
Working with the automatic leveller

1. Push the levelling slide switch [14] to the left (open lock) .
2. Place the product on a horizontal, solid surface or fasten the product to a tripod (see “Working with the tripod”).
3. Switch on the product. The leveller light [17] lights up

Leveller light [17]…………….. Meaning
Green
Automatic levelling is possible. Levelling is complete once the laser lines no longer move.
Red
Automatic levelling is not possible.
The laser lines flash.
NOTE: In the event of vibrations, the laser will level itself automatically. Wait until the laser lines no longer move.

Working without the automatic leveller
NOTES: The leveller light [17] will illuminate permanently in red when working without the automatic leveller. The laser lines depicted are not levelled. The product has 2 magnets [2] . The magnets allow you to attach the product to surfaces that attract magnetic objects, e .g . steel shelves.
ATTENTION! The magnetic surface used should be a flat and not curved or uneven surface. Otherwise, the product will fall down and will be damaged.

1. Push the levelling slide switch [14] to the right (closed lock).
2. Switch on the product.

Working with the tripod
(Fig . B) Screwing the laser onto the tripod mount [19]
Screw the internal thread [21] of the product hand tight onto the tripod screw [22].
Removing/inserting the tripod mount

1. Open the lever [6] .
2. Remove the tripod mount [19] in an upward direction.
3. Place the tripod mount [19] on the tripod for insertion.
4. Lock the tripod mount [19] by closing the lever [6] .

ATTENTION! Do not use excessive force. This may damage the product.
Adjusting the tripod
(Fig. C) NOTE: You can use the dragonfly [13] to check the horizontal alignment of the tripod.

1. Pull the tripod legs [7] apart.
2. Lock the tripod legs [7] into position with the locking ring [9].

Setting the height, tripod feet

1. Open the snap fasteners [8].
2. Extend the tripod legs [7] to the desired length.
3. Close the snap fasteners [8].

Setting the height, crank handle

1. Fold up the crank handle [10] .
2. Hold the crank handle [10] firmly with one hand.
3. Unscrew the locking ring [11] by turning it to the left.
4. Crank the tripod to the desired height.
5. Turn the locking ring [11] to the right to lock this position.

Adjusting the inclination, forward/back

1. Turn the handwheel bolt [5] to the left to loosen.
2. Set the desired inclination.
3. Turn the handwheel bolt [5] to the right to lock the inclination into place.

Adjusting the inclination, sideways

1. Turn the butterfly screw [4] to the left to loosen.
2. Fold the tripod to the desired inclination.
3. Turn the butterfly screw [4] to the right to lock it into place.

Rotating the tripod

1. . Turn the adjusting screw [12] to the left to loosen.
2. Hold the handwheel bolt [5] and turn the tripod in the desired direction.
3. Turn the adjusting screw [12] to the right to lock it into place.

Cleaning and care

WARNING! Never submerge the product in water or other liquids.
WARNING! For repair purposes, the product may only be opened by a professional. Have the product repaired by qualified professionals and only with original replacement parts. This ensures that the safety of the product is maintained.

• The product requires no maintenance.
• Do not allow water to enter the product during cleaning.
• Keep the product clean to ensure good, secure work.
• Use a dry cloth to clean the outside.
• Clean the openings of the 360° laser [1] and the vertical laser [18] with a soft air jet. In cases of heavy contamination, remove the dirt with a slightly damp cotton swab.
• Do not exert any strong pressure!

Storage

• If you will not be using the product for a prolonged period of time, store it in a clean, dry place that is not exposed to direct sunlight.

Troubleshooting

rechargeable battery .
The automatic leveller does not work.| The automatic levellers cannot oscillate freely. The product is not aligned sufficiently parallel with the floor.| Align the product so it is parallel with the floor.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.
** Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with the following meaning: 1­7: plastics / 20­22: paper and fibreboard / 80­98: composite materials.
The product and packaging materials are recyclable and disposed of it separately for better waste treatment. The Triman logo is valid in France only
Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not as household waste. Information on collection points and their opening hours can be obtained from your local authority.
Faulty or used batteries/rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and its amendments. Please return the batteries/rechargeable batteries and/or the product to the available collection points.
Environmental damage through incorrect disposal of the batteries/rechargeable batteries!**
Batteries/rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries/rechargeable batteries at a local collection point.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase.
Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it ­ at our choice ­ free of charge to you. This warranty becomes void if the product has been damaged, or used or maintained improperly.
The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e .g . batteries) or for damage to fragile parts, e .g . switches, rechargeable batteries or glass parts.
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number (e .g . IAN 123456_7890) available as proof of purchase.
You will find the item number on the rating plate, an engraving, on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product. If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service
Great Britain
Tel .: 08000569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel .: 1800 200736
E-Mail: owim@lidl.ie

PDF ONLINE www.lidl-service.con
OWIM GmbH & Co. KG
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Model No.: HG08301
Version: 09/2021
IAN 364888_2101

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>