BRISTAN W BATH03 C Cliker Bath aste with Overflow Owner’s Manual
- June 5, 2024
- BRISTAN
Table of Contents
BRISTAN W BATH03 C Cliker Bath aste with Overflow
Introduction
Thank you for choosing Bristan, the UK’s leading taps and showers expert.
We have designed this product with your enjoyment in mind. To ensure that it
works to its full potential, it needs to be fitted correctly. These fitting
instructions have been created to give you all of the information you need
and, if you need any further help, please do not hesitate to give us a call on
0330 026 6273.
Installation
Components
- Waste Body
- Rubber Washer
- Silicone Washer
- Flange
- Clicker Mechanism
- 500mm Hose
- O-Rings (2)
- Overflow Body
- Rubber Washer
- Rubber Washer
- Overflow Face
- Identify all components are present prior to installation.
- Place the waste body (1) and rubber washer (2) under the bath. Screw the flange (4) into the waste body (1) to secure, ensuring the silicone washer (3) is in place.
- Push the clicker mechanism (5) into the flange (4). Test the mechanism by pressing down and pressing again for it to pop up.
- Fit the overflow body (8) with a rubber washer (9) behind the bath. Secure in place by screwing the overflow face (11) onto the body, ensuring the other rubber washer (10) is in place to create a seal.
- The hose (6) uses push-fit connections to secure in place. Push one end over the top of the overflow body (8) ensuring it goes over both O-Rings (7). Squeeze the other end of the hose to go inside the waste body (1) as far as possible.
- Turn on the water supply and check all joints and connections for leaks.
General Cleaning
Bristan products are made from premium materials, with hand polishing and
electroplated finishes.
Your waste should be regularly cleaned with warm water, a mild pH-neutral
liquid soap, and polished with a soft cloth. Any residues from soap,
toothpaste, shampoos and shower gels can cause blemishes if not rinsed off
straight after use.
Household bleaches and cleaners contain harsh chemicals and may damage the
surface finish. Avoid using abrasive cloths, scouring pads, scrub sponges,
steel wool or anything similar.
Some surfaces such as nickel and pewter may be affected by the dye found in
some cloths, so it is also important to avoid hanging cloths on surfaces.
Bristan Group Ltd.
Birch Coppice Business Park Dardon
Tamworth
Staffordshire
B781SG
Web: www.bristan.com
Email: enquire@bristan.com
A Masco Company
At Bristan, we want to make things as eas y as possible for our customers.
That’s wh y we offer solid guarantees on all our products, effective from the
date of purchase, to give you peace of mind.
To start your free guarantee simply scan the QR code and re gister your
product.
Alternatively visit
www.bristan.com/register.
For any other queries, please call our Customer Service on 0330 026 6273 where
our expert team of advisors will beable to offer you any help and advice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>