Wireless-Tag Technology 2AZBK Code Scanner Box User Manual
- June 5, 2024
- Wireless-Tag Technology
Table of Contents
Wireless-Tag Technology 2AZBK Code Scanner Box User Manual
Brief Introduction
Purpose
The purpose of this product manual is to fully describe the functions implemented by this product, so that users can understand the scope and method of use of this product, and provide necessary information for product maintenance and update.
Scope
The current scope of application: It is suitable for the channel management equipment such as gates, that is, only one person can pass through at a time by blocking and releasing.
Terms and Abbreviations
Terms
None
Abbreviations
None
Reference Documents
| Name | No. | Author | Release date | Remarks |
|---|---|---|---|---|
Product Overview
Product
This product is composed of a display, a code scanning window, a buzzer, a power button and power supply equipment.
Product Images
Figure 1 Product images
Product Parameters
Product dimensions: 105cm X 105cm X 150cm
Display
The display is mainly used to show the personal information obtained by scanning a QR code
Resolution
It adopts a 3.5-inch display with a resolution of 320*480.
Detailed parameters
Table 1 Color display parameters
| No | Item | Specification |
|---|---|---|
| 1 | Display Mode | Normally Black |
| 2 | Screen Size | 3.5 inch (diagonal) |
| 3 | Resolution | 320XRGBX480 |
| 4 | Color Number | 262K |
| 5 | Color Arrangement | TFT Active matrix |
| 6 | Driver IC | ST7796S |
| 7 | Back Light | White LED6 |
| 8 | Viewing Direction | ALL DIRECTION |
| 9 | Interface | 4spi-8bit MCU |
| 10 | Surface Treatment | UV Cut |
| 11 | Touch Panel |
Code Scanning Window
It is used to scan the displayed QR code. There are two types of QR codes: one is electronic QR code(automatically generated in electronic devices such as mobile phones), and the other is paper QR code(the one that the generated electronic QR code printed on paper) .
Buzzer
The buzzer will beep in the following situations.
- Power on and off
- Scan a QR code successfully
Power Button
There is a power button on the back of the product. You can start up the machine by long pressing the power button. To shut down the machine, you need to scan a specific QR code through the code scanning window to achieve it.
Power Supply Equipment
This product is powered by a 21700 lithium battery and is charged via TYPE-C.
Product Performance
Power consumption:
Average power:
Heat dissipation:
EMI:
EMC:
FCC WARNING
his device complies with part 15 of the FCC Rules. Operation is subject to the
following two
conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body.
Document Revision History
No.| Revisions| Changes| Change (+ / -) description|
Author| Date
---|---|---|---|---|---
1| V1.0.0| C| First release.| Liang Sufang| January 14, 2021
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
Changes: C-create, A-add, M-modify, D-delete
Document approval information:
| Author: | Liang Sufang | Date: | January 14, 2021 |
|---|---|---|---|
| Format review: | Date: | ||
| Content review: | Date: | ||
| Approval: | Date: |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>