Denon Professional DN-200BR | Compact Stereo Bluetooth Audio Receiver-Complete Features/Owner’s Guide
- June 5, 2024
- Denon Professional
Table of Contents
Denon Professional DN-200BR | Compact Stereo Bluetooth Audio Receiver
Specifications
- BRAND : Denon Professional
- CONNECTIVITY TECHNOLOGY : Bluetooth
- ITEM DIMENSIONS LXWXH : 1.75 x 4.61 x 5.88 inches
- OUTPUT WATTAGE : 200 Watts
- COMPATIBLE DEVICES : Speaker
- ITEM WEIGHT : 0.6 Kilogram
- AUDIO ENCODING : Stereo
- CONTROL METHOD : App
- ITEM WEIGHT: 1.32 pounds
Introduction
Denon Professional’s Solution Series is designed to be an audio contractor’s best buddy. Its specialization is resolving audio problems quickly and cheaply by delivering signals to locations that would otherwise be difficult or inconvenient to reach. The Solution Series products are easy to install, configure, and operate, and they belong in every audio installer’s toolbox. They’re ideal for new installations or updating current AV and sound reinforcement systems. The DN-200BR connects all of the world’s Bluetooth- enabled audio sources to a professional audio system for sound reinforcement, special events, or retail applications. It detects Bluetooth signals up to 33 meters away wirelessly, then sends the audio to balanced XLR or 14-inch outputs for mixing and amplification. Denon Professional’s Solution Series is designed to be an audio contractor’s best buddy.
Its specialization is resolving audio problems quickly and cheaply by delivering signals to locations that would otherwise be difficult or inconvenient to reach. The Solution Series products are easy to install, configure, and operate, and they belong in every audio installer’s toolbox. They’re ideal for new installations or updating current AV and sound reinforcement systems. The DN-200BR connects all of the world’s Bluetooth- enabled audio sources to a professional audio system for sound reinforcement, special events, or retail applications. It detects Bluetooth signals up to 33 meters away wirelessly, then sends the audio to balanced XLR or 14-inch outputs for mixing and amplification.
Its Bluetooth Pairing mode offers a quick, painless, and secure pairing. Installation is simple and unobtrusive. The DN-200BR has a tough metal shell with built-in eyelets for mounting screws and is only 1. 8 inches (45mm) high, 6 inches (152mm) wide, and 6 inches deep, making it ideal for quick installation into any surface. With a wide frequency response, a low signal- to-noise ratio (> 75 dB), and support for all mainstream profiles (AVCTP 1. 0, AVRCP 1. 0, GAVDP 1. 2, AVDTP 1. 0, A2DP 1. 2, Hands-Free Profile (HFP) 1. 5, Headset Profile (HSP) 1. 1), the AVCTP 1. 0, AVRCP 1. 0, GAVDP 1. 2, AVDTP 1. 0, A2DP 1. 2, Hands-Free Profile (H
BOX CONTENTS
- DN-200BR
- User Guide
- Power Adapter
- Safety & Warranty Manual
FEATURES
**POWER INPUT
**
Use the included power adapter to connect this input to a power outlet.
BLUETOOTH ANTENNA
The antenna receives and transmits the Bluetooth signal from a paired
Bluetooth device. DN-200BR has a range of up to 82 feet (25 meters).
PAIR BUTTON
Press and hold this button for 3 seconds to make DN- 200BR available for
pairing to a nearby Bluetooth device.
STATUS LIGHT
This LED indicates the DN-200BR’s Bluetooth pairing status:
- Flashing slowly (approximately twice every 2 seconds): DN- 200BR is not paired to a Bluetooth device.
- Flashing quickly (approximately twice per second): DN-200BR can be paired to a Bluetooth device.
SOLIDLY LIT
DN-200BR is paired to a Bluetooth device.
LEVEL KNOB
Turn this knob to adjust the output volume level (sent to the balanced and
unbalanced outputs).
OUTPUTS (BALANCED XLR)
These outputs send the audio from a paired Bluetooth device. Use XLR cables
to connect these outputs to your loudspeakers, mixer, etc.
OUTPUTS (UNBALANCED 1/4” / 6.35MM)
These outputs send the audio from a paired Bluetooth device. Use standard
1/4” (6.35mm) cables to connect these outputs to loudspeakers, mixer, etc.
SETUP
- Use either XLR cables or 1/4” (6.35mm) cables to connect the DN- 200BR’s outputs (balanced or unbalanced) to your loudspeakers, mixer, amplifier, or another device that accepts line-level inputs (this device must be powered off).
IMPORTANT
- For stereo operation, make sure all left (L) and right (R) outputs are connected to left and right inputs, respectively.
- Use the included power adapter to connect DN-200BR’s power input to your power source.
IMPORTANT
Do not use DN-200BR near a microwave oven, which can interfere with the
reception.
- If you are using a mixer, make sure all of its connections are secure, and power it on.
- Power on your loudspeakers last.
EXAMPLE
OPERATION
You can play audio from an audio device that sends its signal over a Bluetooth connection (e.g., smartphones, tablet computers, etc.). DN- 200BR uses Bluetooth 2.1 + Enhanced Data Rate (EDR) and has a range of up to 82 feet (25 meters). Once you “pair” your Bluetooth device with DN-200BR, they are “connected” wirelessly. You can play audio on your Bluetooth device, and it will be sent out of DN-200BR’s outputs (balanced and unbalanced).
IMPORTANT
- DN-200BR will not receive audio from a phone call. While using it, we recommend disabling your cellular connection, if possible.
- Do not use DN-200BR near a microwave oven, which can interfere with the reception.
- While DN-200BR is paired with a Bluetooth device, other Bluetooth devices cannot pair to it. You must unpair (“disconnect”) the current Bluetooth device from DN-200BR to make it available to others.
TO PAIR YOUR BLUETOOTH DEVICE TO DN-200BR
-
If DN-200BR is off, use the included power adapter to connect its power input to your power source. The Status Light will flash slowly.
-
Make sure your desired Bluetooth device has its Bluetooth connectivity on and is within range. DN-200BR will automatically try to pair with the last-paired Bluetooth device if any.
If you are using that Bluetooth device again, you can start playing audio immediately.
If you want to use a different Bluetooth device, continue to Step 3. -
Press and hold DN-200BR’s Pair button for 3 seconds. When the Status Light starts flashing quickly, release the Pair button.
-
On your Bluetooth device, enter its Bluetooth settings menu, and select DN-200BR.
NOTE
(Some older Bluetooth devices may require you to enter a PIN. If this is the case, enter 0000 as the PIN. -
On your Bluetooth device, start playing audio.
To adjust your volume level, we recommend setting the volume control of each of your devices in the following order
- your Bluetooth device
- DN-200BR, using its Level Knob
- your mixer, if any (its input channel level[s], then its main output level)
- your loudspeakers
Set each volume level as high as possible without creating distortion or any “ clipping” of the sound.
IMPORTANT
DN-200BR will not receive audio from a phone call. While using it, we
recommend disabling your cellular connection, if possible.
To unpair your Bluetooth device from DN-200BR, do one of the following:
- Enter your Bluetooth device’s Bluetooth settings menu, and disconnect from DN-200BR.
- Press and hold DN-200BR’s Pair button for 3 seconds, and then release it. DN-200BR will unpair from your Bluetooth device and be available to pair to another one.
Frequently Asked Questions
-
What is the function of a Bluetooth audio receiver?
A Bluetooth Receiver converts a non-Bluetooth device, such as a speaker, docking station, HiFi, headphones, AV receiver, or car stereo, to Bluetooth, allowing it to receive audio from a Bluetooth-enabled device. -
Are Denon receivers equipped with Bluetooth?
You can now listen to audio from new Denon AV and Stereo receivers available in 2019 using Bluetooth headphones (see the list of Denon receivers that support the “Bluetooth-headphones-output” function at the bottom). -
Is it possible to set up a Denon receiver without a television?
The unit does not require the usage of a television. By clicking the BACK button on your remote and following the on-screen instructions, you can bypass the setup assistant. -
My phone won’t connect to my Denon receiver for some reason.
Turn the Bluetooth headphones’ power on and off again, then try again. Set “Transmitter” to “On” in the Setup Menu by going to “General” > “Bluetooth Transmitter.” Check to see if this device is already linked to a set of Bluetooth headphones. -
Is it possible to turn my Denon receiver into a wireless device?
When the unit is turned on, press and hold the TUNE + and TUNE – buttons on the main unit for at least 3 seconds. When the message “Connect your Wi-Fi device to Wi-Fi network called “Denon AVR-S750H” appears in the display, connect the wireless LAN of the PC or tablet to “Denon AVR-S750H.” -
Can I connect my Denon receiver to wireless speakers?
It’s called “HEOS Built-in,” and it uses Wi-Fi to connect Denon’s home theatre receivers, wireless speakers, and even compatible sound bars. -
Is Bluetooth capable of stereo transmission?
A Bluetooth adapter can be used to play music from your smart device on any stereo having either an analogue or digital audio out. To be compatible with most stereo systems, most Bluetooth audio receivers have both of these connections. Analog gadgets work by transferring data via electricity. -
What may a Bluetooth receiver be used for?
A Bluetooth receiver can be connected to your analogue or digital audio system, allowing you to stream music and podcasts from your phone to the speaker. Any audio system may be made wireless with this method, transforming your stereo into a Bluetooth-controllable gadget. -
What is the purpose of a Bluetooth adapter?
A Bluetooth adapter is a plug-and-play gadget that connects to a computer’s USB port and allows the computer to connect to a Jabra device through Bluetooth. -
What is the difference between Bluetooth Tx and Rx?
The word RX means “receive,” as in “received.” TX is outgoing and transmitting.
https://www.manualslib.com/download/1390580/Denon-Dn-200br.html